How to Replace the Front Wheel Bearings on a 2000-06 Chevy K1500 Silverado Suburban GMC Sierra Yukon

Подписаться 213 тыс.

Просмотров 223 тыс.

50% 1

Brian Eslick from How to Automotive www.howtoautomotive.com takes you step-by-step through the process of replacing the front wheel bearings on a 2000-2006 Chevy K1500 Silverado, Suburban, GMC Sierra and Yukon.
Affiliate link mentioned in the video for Timken SP500300 Axle Bearing and Hub Assembly amzn.to/2hXcWbx
Affiliate link mentioned in the video for Permatex 24300 Surface Insensitive Threadlocker Blue, 0.34 oz. amzn.to/2h0htrR
Affiliate link mentioned in the video for WD-40 110057 Multi-Use Product Spray with Smart Straw, 8 oz. (Pack of 1) amzn.to/2h118Vv
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomotive.com/
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: How-to-Autom...
Google+: plus.google.com/+HowtoAutomot...
LinkedIn: / brian-eslick-819839118
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #howtoautomotive

Авто/Мото

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@samsen3965 Год назад

Torques: Bearing axis 35mm : *184* foot pounds 5 The 3 - 15mm bearing holders: apply blue luck thread on blots then *133* fp 5:04 The 2 caliper's 18mm : *74* fp 6:25 The 5 Wheel log knots 22mm : *140* FP

@alexanderkurtkuechler2745 6 лет назад

To the people complaining about the title, honestly who gives a shit? On these trucks you’re going to replace the hub assembly with the bearing, otherwise you wind up hydraulically pressing the bearing into place, which is no picnic. The point is that this was a good, well informed video for anyone who has trouble with this particular repair.

@HowtoAutomotive 6 лет назад

Alexander Kurt Kuechler thank you well said!

@budman-tw6rr 4 года назад

Like my math teacher used to say, show your work please.

@lavonn1108 Год назад

EXACTLY!

@CGBLACKSMITH 11 месяцев назад

Fr😂

@scottskinner577 11 месяцев назад

I like when these videos start with "Ok now that we've removed blah blah blah..." I'm like um Hold Up. No we didn't! That's the part I came here for lol

@CGBLACKSMITH 11 месяцев назад

@@scottskinner577 yes

@terryhamilton2303 Год назад

THANK YOU BRIAN, WONDERFUL INFORMATION

@inhocsigno9151 5 лет назад

Good video and tips. Looks like you are an experienced mechanic.

@HowtoAutomotive 5 лет назад

InHocSigno thank you. Did everything go smooth for you?

@inhocsigno9151 5 лет назад

@@HowtoAutomotive - About to order the parts. But the job looks do-able.

@larrymccrory311 2 года назад

@@HowtoAutomotive yes

@samuelcastilloverdugo2802 Год назад

muchas gracias, excelente video.

@victorolguin 2 года назад

appreciate the video!!

@jessiebarker6404 3 года назад

I have a z71 Chevy Silverado 2002 for wheel drive an the axle has play in it an when u drive it u can feel it in the steerin like the Strut is lose bu it’s the axle that moves up an down I’ve changed the axle an the ball joints an control amrs do u think it could be the wheel bearin tha is bad an u think thanksgiving why the cv axle is lose jus askin wha do u think it is

@hitmanhydraulics645 4 года назад

Are they universal? Mine does not have 4 wheel drive and I am worried about the dust cover.

@wirednetwork9501 6 месяцев назад

Great video thank you sir!

@HowtoAutomotive 6 месяцев назад

Thank you!

@greghess6475 4 года назад

Great video. Excellent work and detail.

@SteveRobReviews 8 лет назад

Nice vid but I seem to pound on them till my hammers gives out. Always good to have a backup hammer. LOL

@edgardoestrada313 Год назад

What brand did you use

@209Stretch 6 месяцев назад

Is it unusual for a front wheel not to want to spin freely after having installed a new wheel bearing assembly? I’m doing this on my 2006 Silverado 1500 rwd & it’s so tight after I can tighten the lug nuts all the way down with the truck still in the air.

@alfonsotorres4144 3 года назад

Great!!

@totalglitch Год назад

What wheel bearings should I use. I've seen Detroit axle, moog, timken

@HowtoAutomotive Год назад

I’ve had good luck with the Timken. and I put links for them in the description of the video. You just have to hit the drop-down arrow.

@johnnyryall1400 4 года назад

Do you use thread locker on the axl nut?

@taylordarling9215 3 года назад

No need as the torque spec is 250 foot pounds

@Toolaholic7 8 лет назад

Just tighten the axle nut with an impact,you can't do damage to the wheelbearing and is 100% impossible to fully torque the axle nut down.Plus you can't overtighten the axle nut with an impact.I do this all the time and no comebacks,stop when the socket quits turning.

@HowtoAutomotive 8 лет назад

In most cases that's how I would do it. but you got to keep the lawyers happy. Lol thank you for watching!!

@Toolaholic7 8 лет назад

The wheelbearing manufacturers say you can do damage to the wheelbearing when tightening the axle nut down with an impact which is a lie.The axle nut is a solid piece of steel which can't be overtightened

@HowtoAutomotive 8 лет назад

+wafrederick over tightening them is not so much the problem . It's under tightening them that can cause the bearings to wear out. The squeezing of the axle and the hub is what holds the Bering together.

@trevorgay1248 6 лет назад

I'm confused now I am hearing conflicting stories on weather or not to torque the axle not I tightened it with a impact until it quit turning is this what everyone does or should I go back and tighten it with a torque wrench

@browndawg5872 5 лет назад

thank u

@HowtoAutomotive 5 лет назад

Thank you for watching!

@johnnymartinez6395 6 месяцев назад

How much does this run for both wheels

@itsCapsWrld 4 года назад

Since it's a Z-71 couldn't you just put the truck in 4-Hi to lock the front axle in place?

@logandp10 3 года назад

Yes, I actually just did that

@5thoftheyr Год назад

wow, my first time hearing this

@adreanhernandez8031 4 года назад

How can i find out when my wheel hubs are bad??

@ronfox5519 Год назад

If youre wondering, its probably for good reason, but when it gets real bad- you wont have any doubt. Good ways to check- Temp. Drive a few miles or more and check the temp of the wheel with you hand. Compare to the wheel on the other side. Sound. Raise wheel off ground and spin. Listen for rough sound. A stethescope will help alot. Feel. Does wheel move when you wiggle it or feel rough when you spin it?

@mib20000 5 лет назад

what size in the axle nut ????

@johnnyrebel5259 5 лет назад

35 mm

@LouORourke 6 лет назад

i have a 2001 1500 with no axle, this video is right, by the title

@mariobarrera1882 5 лет назад

I believe this is a z71 4x4

@markadams5823 2 года назад

Size on the axle nut?

@grizzleygangsasuke6684 2 года назад

@JmartRanchoelnogal 4 года назад

After changing a front wheel bearing on my 2006 silverado the abs light came on . What can I do next to take off light?

@edwuncleriii2286 4 года назад

Clear the code 😂

@Raybo247kck 5 лет назад

Everybody had different ratings on torque specs ? I have a 2003 Chevy silverado 4x4

@upnorth5465 4 года назад

According to AllData the Caliper bracket is 80ft lbs, hub mounting bolts are 133 ft lbs and the axle nut is 177ft lbs. For a 2003 1500 4x4

@johncane4127 3 года назад

You sure about the 133 ft lbs on the 15mm bolts

@awautoworks4426 3 года назад

Should be 75 lol

@wolfmanwalrus1604 2 года назад

Mine didn't have an axel nut.

@manueljoe5127 3 года назад

How much is the front wheel bearing cost

@taylordarling9215 3 года назад

Any where from 50-150 depending on what brand you go with

@noahthompson9930 4 года назад

very well made video, but this isnt a wheel bearing replacement, this is a hub replacement

@chadappleton9270 3 года назад

You didn't even bother to tell me what size the Axle nut was. No big deal tho

@taylordarling9215 3 года назад

36 mm or 1” 7/16

@markadams5823 2 года назад

Other comments say 35mm

@Generational.holiness 9 месяцев назад

You should’ve showed the whole thing and not left any parts out

@LordWolfman1119 10 месяцев назад

I'm sorry put this comment on your video but everybody shows the driver side no one wants to show the passenger side which is the long shaft it's a pain in the ass a short way to do it I might as well make a video because everyone shows how to take the left side out but not the right side

@LouORourke 6 лет назад

isn`t right by title