How to Replace Front Window Regulator 2000-06 GMC Yukon

Подписаться 494 тыс.

Просмотров 72 тыс.

50% 1

Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ia/1AWR...
Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle! This video shows you how to replace both the window regulator and the motor on your 2000-06 GMC Yukon.
• Buy TRQ at 1AAuto.com: www.1aauto.com...
• Check here for more videos on the 2000-06 GMC Yukon: • GMC Yukon 2000-06 2nd Gen
This process should be similar on the following vehicles:
2000 GMC Yukon XL 1500
2001 GMC Yukon XL 1500
2002 GMC Yukon XL 1500
2003 GMC Yukon XL 1500
2004 GMC Yukon XL 1500
2005 GMC Yukon XL 1500
2006 GMC Yukon XL 1500
Tools you will need:
• Pocket Screwdriver
• 7mm Socket 1aau.to/oaFz/1A...
• Trim Tool Set 1aau.to/oQw/1AX...
• T20 Socket
• Ratchet 1aau.to/oa9y/1A...
• Socket Driver
• Socket Extensions 1aau.to/oaUQ/1A...
• Painter's Tape
Subscribe: / @trq
Check out our playlist:
GMC Yukon 2000-06 2nd Gen: • GMC Yukon 2000-06 2nd Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

17 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@Manolo05 Год назад

Just changed my passenger side today. Being able to pause and play video through the process was amazing. Thank you very much for your help 🙏

@marymadalenem2351 2 года назад

Thank you so much. I did the front and back door, watching your videos. Easy pezy for a 65 yr young woman. Thank. You again. Now I have to figure out how to get the front window out.🥳💞

@chiefywizard6325 2 года назад

What about when the window is stuck halfway down bc the regulator is shot? Do all the following the same?

@dgb56bgd Год назад

Thanks 🙏 y’all. What a pleasure. Y’all helped me do something that was stressing me out. Blessings.

@mikaeljordan1983 6 месяцев назад

Great video ! Very helpful, did the job my self and saved me some $$$ ! Thanks 🙏

@jesspeterson3639 Год назад

People like you who post helpful vidoes should have a special place in heaven! Followed your video and it was a piece of cake. Thank you!!

@markrup6115 8 месяцев назад

I don't know. Seems like you need a working regulator to replace your regulator. Kind of silly to show how to replace a perfectly functioning regulator, i.e., one that allows you to raise and lower the window. Hey, here's a thought.... maybe the reason I'm replacing the regulator is because IT DOESN'T WORK. I know, crazy concept, right?

@buddyrebel_Garcia 5 месяцев назад

I’m changing this tomorrow I just bought this from you guys wish me luck. I’m gonna use this video as a guide.

@TRQ 5 месяцев назад

+@buddyrebel_Garcia Thanks for watching our video! 1aau.to/m/Shop-TRQ

@matt1544zxc3 9 месяцев назад

great video. Very helpful to see how the pieces interact, and to know what I'm supposed to be removing when i take out the old (broken) one.

@jeremyhagen7684 3 года назад

Save yourself and just take out the switch assembly to put the window up and down. Much easier to see than putting the door panel off and on.

@TRQ 3 года назад

+Jeremy Hagen We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair. 1aau.to/m/Shop-TRQ

@andrewcordova8400 2 дня назад

Send like the old one still has a metal ring holding the 2 cables in the center and my new one came with a zip tie there, should i not cut the zip tie? I think you did in the video but prolly weren't supposed to?

@robkonkol5700 2 года назад

What would you do if the window was partially down and you can't get to the bolts that attach the glass to the regulator?

@4valveduc 3 года назад

Thanks for the great video, did this job today and it is super easy. 👍

@rolandobarral5333 3 года назад

Great job! I like the way you make It look simple ! Very good video, especially for something I need to do! Thank you! Really get a lot of info from all your videos!

@user-Army11Bro 6 месяцев назад

My GMC yokon while driving comes alive with ever bump in the road and goes slower then before. An electrical problem???

@jakemustian99 6 месяцев назад

To make this simpler you can take the window switches out of the door pannel so you dont have to deal with the entire door pannel 6 times

@jimstaszko1675 Месяц назад

I test the "new" regulator to make sure it's not DOA before bolting it all in.

@boomermartinson1415 2 года назад

Thanks for posting the video. It made it very easy for me to do. Thanks again!

@samsen201 9 месяцев назад

Nice demo. However you old motor was working. What if the old one like mine, is dead when glass is fully up. How do I get to those bolts if electrically I can't bring the glass down? 4:55

@rogerking8205 Год назад

How does the cables fit on the little slider deals on a '99 Chevy Silverado on passenger side window

@jamesonallen3715 Год назад

I can hear power trying to bring my front passenger window down, but it’s stuck all the way closed… any idea if that means the entire assembly needs replaced?

@QuestWithMe 3 года назад

My back driver side door window will roll down, but won't roll back up past 1/5th of the way. I can tell if I need to replace the motor or the window holder. I notice the clamps that hold the window also won't stay in their location so I had to use zip ties to hold in onto the doors frame through some wholes. Any help?