How to Replace Fuel Injector 2003-2008 Toyota Corolla

Подписаться 475 тыс.

Просмотров 57 тыс.

50% 1

For More Info visit us at: 1aau.to/h/eCj/
This video shows you how to install a new fuel injector on your 2003-2008 Toyota Corolla. Fuel injectors are computer controlled spray nozzles that deliver fuel to your engine in precisely controlled volumes. They are one of the keys to modern efficient and clean engines. If a fuel injector is dirty or failing, it can present symptoms such as rough idle, engine surges, rich or lean conditions, and check engine lights. Replacing a problematic fuel injector with an engineered to fit TRQ replacement part right away is essential to the health of your vehicle’s engine.
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• 10mm Socket 1aau.to/oa3N/1AXAA00017
• 12mm Socket 1aau.to/obmp/1AXAA00015
• Ratchet 1aau.to/obuV/1AXAA00016
• Brake Parts Cleaner
Subscribe: / @trq
Check out our playlist:
Toyota Corolla 9th Generation 2003-2008: • Toyota Corolla 9th Gen...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

24 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@TRQ Год назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@HungryH1951 2 месяца назад

Just saved yourself about $400-$500. This is a good video, very helpful.

@8gomerpyle22 Год назад

Why do car dealerships charge $800 - $1200 for this job? I don't get it.

@chefboiali Месяц назад

Came here before helping my friend with her Matrix! Perfect. Such a good call about the brake cleaner! Thanks much!

@mblnld4967 Год назад

This is perfect timing to post this video, I literally just got my new injectors for my corolla today, about an hour ago

@Thebeekeeper568 11 месяцев назад

So informative ! My problem was the debris around the area that was getting between the O ring.

@mkrp4 4 месяца назад

Very informative and hands on. Two things: --the cars with MAF sensor will not prime the fuel system until key is in start. Taking out the starter relay from fuse box and turning key to start will prime the fuel rail We should look on the joint between injector and fuel rail to check for leaks -- 6:55 not a bad idea to spray carb cleaner at the injector to head seals with engine idling to check for the vacuum leaks, because some aftermarket parts are too loose and allow air leaks at this point leaning the mixture and causing higher than normal fuel trims.

@tiredofthenonsense123 29 дней назад

Thank you for all your how-to videos. They are detailed, and your camera doesn't shake so much that it makes the viewer nauseous. I've been able to complete a lot of repairs with your help, and I stopped getting shafted by crooked mechanics.

@Yankrlos420 Год назад

Thanks to your video I did it on my Matrix XR 05 awd whitout any help and it ends perfectly. Just for be clear I’m not a mechanic but I like do stuff on my own risk.

@TRQ Год назад

+Carlos Flores Thanks for watching our video! 1aau.to/m/Shop-TRQ

@kevinkaminer380 Год назад

😢Very informative and well filmed video. Quite helpful. Thanks!

@mikemccord8218 Год назад

Another great job . Well done kid!

@easttennesseeshakerboxes4833 Год назад

Thank you so much a little tricky with the seal up but thanks a million!!! I could say 500-1000

@drivewaygarage1561 8 месяцев назад

I have watched several videos and yours is the best.

@bonnylaguardia1486 11 месяцев назад

Do i need to depressurize the fuel line first?

@manuelramos4608 Год назад

Wish I saw this video before. I definitely ruined my own injectors doing them the first time

@endakeating2712 11 месяцев назад

Very helpful video

@emanekaf1 10 месяцев назад

Worked perfect tyank you so much 👌

@josefranciscoesquertalaman3827 Год назад

Presente en clases desde Navojoa Sonora México Like 🎉

@KrisCortez Год назад

Your storefront lists this part as incompatible with my 2003 Corolla CE. So I ordered a part was compatible (its green colored instead of blue like this one) and it came with no lower rubber seals. Im confused

@posadist681 8 месяцев назад

Thank you for this video

@Youworstnightmare77 10 месяцев назад

So nice video. But mi big concern is. You not need to disconnect the negative battery terminal. To do rhis process?

@da9ej1eg99 9 месяцев назад

Wait dont you have to release fuel pressure 1st?

@octopusmagnet 3 месяца назад

great video!

@user-mu1tx3rs1f 4 месяца назад

Good job sir

@zizoumonk10 11 месяцев назад

Do you need to disconnect the fuel line into the fuel rail not just the bracket?

@Mr.A193 Год назад

Was that a good sound of the engine 🤔 because I have the same car in the uk and this sound is driving me crazy

@thegloriousvoices9671 10 месяцев назад

How many holes does the Toyotal Allion 2003 fuel injector has?

@danflicks6932 6 месяцев назад

Does this work with a 2006 Toyota Highlander 4 cylinder?

@ramosklan4 7 месяцев назад

Instead of carb cleaner, can you use mass air flow cleaner or electrical contact cleaner when installing the injectors and manifold?

@BrettHoustonTube 2 месяца назад

Wow, that was exceptional. Great info, to the point with no wasted time! Thanks! I have a 2007 Corolla. A mouse chewed the wires on #4 injector and although I repaired the wires it is still throwing a code for #4 cylinder not firing. Do you think it damaged the injector or the computer when the wires were shorted?

@borodavk 2 месяца назад

Great video, thx! I would think twice about spraying brake cleaner onto anything rubber... (Too aggressive chemically) Carb cleaner is a different story: these seals should be made to withstand petroleum distillates

@alanalex941 5 месяцев назад

Do i need to take out the battery clip before changing that injector?

@milesnorsworthy946 9 месяцев назад

Fun fact, on the Toyota Echo they add a useless piece on the engine top that stops you from removing that hard steel line so you have to remove the entire top of the engine to replace a single fuel injector.

@babyballsj1216 Год назад

Will faulty fuel injectors cause the engine to not crank or start?

@yingcluk 2 месяца назад

I think it's best to add how to depressurize the fuel line first. Like pull out the fuel pump relay or fuse and start the engine until it dies. I believe you should have done it otherwise the gasoline would be gushing out of the fuel rail.

@byronzuniga81 3 месяца назад

I replaced the fuel injectors on a camry 09, but now i have a hard start-up, and it starts up on the second or third key turn But when i replaced them, i removed the fuel rail bar out of the engine fuel line Do you thing thats is the problem and have air in the fuel line?

@farminglife5890 2 месяца назад

How we know we need to change the injectors ??

@leonjose8574 3 месяца назад

Will this be the same process on 02 Toyota rav4?

@user-vk1bg1en1q 10 месяцев назад

so no one's not gonna ask if u take out the fuel injector fuel is not gonna come out shooting

@d.hardunkichud944 2 месяца назад

I think I messed up. I have a 2003 Toyota Avalon. I replaced the fuel injectors but now my car takes a little longer to start up. It’s takes a couple turns for it to turn over and start. Anyone have advice?