How to Replace Fuel Injectors 2006-2011 Honda Civic

Подписаться 461 тыс.

Просмотров 35 тыс.

50% 1

Buy Now!
New Fuel Injector from 1AAuto.com 1aau.to/ia/1AFIN00155
This video shows you how to install new fuel injectors from TRQ on your 2006-2011 Honda Civic. Fuel injectors are computer controlled spray nozzles that deliver fuel to your engine in precisely controlled volumes. They are one of the keys to modern efficient and clean engines. If a fuel injector is dirty or failing, it can present symptoms such as rough idle, engine surges, rich or lean conditions, and check engine lights. Replacing a problematic fuel injector with an engineered to fit TRQ replacement part right away is essential to the health of your vehicle’s engine.
This process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic
Tools you will need:
• Pry Bar 1aau.to/oUv/1AXAA00020
• 10mm Wrench 1aau.to/oWN/1AXAA00010
• 10mm Socket 1aau.to/obdd/1AXAA00017
• 12mm Socket 1aau.to/obxh/1AXAA00015
• Trim Tool Set 1aau.to/oadr/1AXXX00006
• Needle nose pliers 1aau.to/oDU/1AXAA00051
• Needle nose pliers 1aau.to/oDU/1AXAA00052
• Pliers
• Ratchet 1aau.to/obCZ/1AXAA00016
• Socket Extensions 1aau.to/obxh/1AXAA00015
• Torque Wrench 1aau.to/oaGJ/1AXAA00044
• Engine Oil
• Gloves 1aau.to/oaa7/1AXSS00048
• Safety Glasses 1aau.to/o4i/1AXAA00343
• Magnet - Extendable
• Pick 1aau.to/oQo/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

15 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@TRQ 10 месяцев назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@joshaden6533 10 месяцев назад

You pulled the fuel pump fuse, tried to start the engine, then put the fuse back in and turned the ignition on. 🤔🤔🤔

@skradaddy 2 месяца назад

for the longest time my car kept stalling or hesitating when giving the car some gas. I thought it was a maf or anything related to my air intake. I had my mechanic put his scanner on and every-time my engine called for gas it didnt read or was a low number indicating my fuel injectors might be going bad, also my car is at 180k miles, so I was definitely due for some fuel injectors. I bought the parts from trq and installed them while watching this video. I test drove the whip and it feels brand new now. Thank you so much!

@vincecarlo 7 месяцев назад

I just pulled the whole rail with Injectors together. Easier that way Doesn't make a mess of fuel all over the place

@danielpinacarballo3337 10 месяцев назад

This is freaking awesome now I can knock this out with the fuel pump assembly at the same time! Thanks !!

@Dabrat10 9 месяцев назад

What about cleaning or any kind of prepping the hole that they are going back into? Or do you just leave it dirty?

@jachinloi5066 7 месяцев назад

Very clear explanation video, do you have a video of changing the fuel pressure regulator.? Thanks

@mattjob8345 3 месяца назад

looks like only 1 injector was actually replaced(new) did you test all injectors?

@neelrivera2010 9 месяцев назад

Does P0300 to P0303 could be triggered by these? I have been searching and I already replaced my coils and spark plugs but the car still has this codes on and sometimes flashing, includes sometimes loss of power. Still is not the Head gasket because I had it checked with a Combustion Leak tester and it came negative.

@rapahelnavar6620 6 месяцев назад

I have a 2004 civic Lx d17A will this method be similar? Thank you

@gr2262 3 месяца назад

8:40 "a little bit of fuel may come out" ... rail pours tank empty

@farhaanahmad9444 8 месяцев назад

why did you take off metal clips from injectors before removing injectors whereas you put these first when installing new injectors and put whole assembly together?

@rickydub6950 9 месяцев назад

Thanks for posting this, have this job to do on my mums civic 👍🙂

@willfreethemfreethem7671 8 месяцев назад

Thanks for this video

@lanla9986 4 месяца назад

Hey, I took out my fuse started the car to clear the gas line. Then after I put back the fuse all the check engine light went off. Is this normal?)

@luisduar573 6 месяцев назад

Like always nice video.

@quangdat2523 8 месяцев назад

that is wonderful, awesome!

@jdolaktv 4 месяца назад

Will this work with a '12?

@jacobwswift 6 месяцев назад

Appreciate this

@PanjalsDIY 10 месяцев назад

Can you please make video on replacing intake manifold for this vehicle..

@TRQ 10 месяцев назад

+Panjala' s We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ

@ThePhtillman 8 месяцев назад

Followed the steps but the check engine light is flashing and engine is shaking while idling. Sounds like a misfire. What should I do?

@djredx2462 3 месяца назад

My car is stuttering when accelerating and I changed the gas filter thinking it was it but I still have the same issue any ideas ?

@henrylint3227 5 месяцев назад

Before putting the covers back on everything, it might be wise to prime the rail and check for leaks. I've seen people burn their cars down by not double checking their work.

@TRQ 5 месяцев назад

+@henrylint3227 Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ