How to Replace Leveling Kit 2007-2013 Chevy Silverado 1500

Подписаться 532 тыс.

Просмотров 69 тыс.

50% 1

Buy Now!
New Leveling Kit from 1AAuto.com 1aau.to/ia/1ASL...
This video shows you how to install a suspension leveling kit on your 2007-2013 Chevy Silverado 1500. You can use a leveling kit to level out the stance of your pickup truck from a slight forward rake to level back to front.
This process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaZ2/1A...
• Pry Bar 1aau.to/oH3/1AX...
• 15mm Wrench 1aau.to/oKR/1AX...
• 17mm Wrench 1aau.to/oKR/1AX...
• 15mm Socket 1aau.to/oa2Q/1A...
• 16mm Socket 1aau.to/oa2Q/1A...
• Torque Wrench 1aau.to/oakz/1A...
• Cloth Rags 1aau.to/owM/1AX...
• Floor Jack 1aau.to/oPB/1AX...
• Jack Stands 1aau.to/oK2/1AX...
• Rubber Mallet 1aau.to/oe4/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@TRQ Год назад

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@nedflanderz8262 Год назад

Before and after pictures would have been good.

@jacob6022 Год назад

Installing the strut to LCA bolts from bottom up causes it to hit the axle.

@jamesjiles9851 8 месяцев назад

You made that look so easy and also you didn’t take all the other stuff apart. Good job sir, well done! HOWEVER!! I can’t seem to get mine in I have the spacer on top of the strut and the bottom spacer would absolutely not go in. The angle was too extreme. I noticed the strut didn’t go back in the way it come out…the bolts were lined up different so it was spun around. The sticker on the strut that was facing out is now on the back….anyone got any advice…I really would like to get that last piece placed in. Thank you all so much for reading my comment and thank you in advance if you reply.

@scottyharris3988 5 месяцев назад

Very good demo. Thanks

@victorpatterson719 Год назад

Thank you TRQ that really did come in handy

@jamesnolan9202 Год назад

Never knew there was a picture of a valve stem behind that center cap.

@jcjmoney2859 Год назад

On the new links did you buy longer ones or the stock length ones do ok?

@chrisjardeleza8489 6 месяцев назад

been watching a few videos on leveling for my 2011 sierra 1500. dont want to cause problems or suspension geometry, but I am putting an aftermarket bumper and grille guard on and I am almost willing to bet it is going to weigh the front end down and make it look more nose heavy than it does coming from the factory. are there any dis/advantages to leveling the way you did it compared to that puck that goes on top of the spring coil instead? your way seemed a lot easier and significantly less disassembling.

@mrme9517 2 месяца назад

So are these better than the cups that mount on the top or is this the same or easier

@thehouseofhorsepowerautobo4506 10 месяцев назад

I tried doing this with my 09 and I can't get the spacer in because it hits the axle, not sure what I'm doing wrong. It does have a 2" spacer on top of the strut....

@lkanguro1 7 месяцев назад

So there’s no need to loosen the upper control arm??? I’ve seen a couple of videos that say to do so that’s why I’m asking??

@jesusantoniovasquezmatias75 Год назад

By chance the truck does not lose stability in high speed with that leveling kit?

@davidcoggins8891 Год назад

Those northern trucks, lol

@yourjustmaaadd2490 Год назад

Can you also put spacers on top of the struts if you put these on?

@PopAdoYa Год назад

I would say no for safety reasons but you only live once so why not

@flabiobasurto5167 Год назад

Bro said “if I die I die”

@KevinPDunn Год назад

Will this work for 2011 Suburban 2500 4wd?

@showmartinez3460 Год назад

The guy who installed mine only used two washerd total. One under block. Between block amd cntrl arm??? He didnt put one on top before nut nor did he put one on bolt before inserting

@aneyesky 7 месяцев назад

You’re awfully close to scraping an axle on the inboard bolt with this kit. Looks like it’s a one size lots all kit. I’d cut off 1/2” off that bolt first so it doesn’t. Plus you skip at 4:47 to the long bolt/ washer bushings exactly doing what? I mean thanks for making another video for us shlubs, but come on guys - I’m not even a mechanic and I can see problems with this kit

@carlosorozco12 Год назад

Are wee need to get aligment again whe we finsh put it the leveling kit ?

@TRQ Год назад

+carlos orozco Yes, an alignment would be needed after installation.

@oscarvera101 Год назад

how much inches is the kit?

@princenoah21 Год назад

But 1 question. Do you really need to unbolt the sway bar link? If yes, do I need a front-end alignment?

@PopAdoYa Год назад

I do not know if you need to unbolt it or not but you will not to to get an alignment if you do because it has nothing to do with steering

@TuckerBeattie Год назад

If your truck didint have a level kit before then yes it needs an alignment. If you are just replacing your level kit then no you don’t need an alignment. Sway bar link has nothing to do with alignment, you could likely even drive completely fine without one altogether (not recommended just theoretically).