Тёмный

How to Replace Rear Axle Shaft, Seal, and Bearing 2000-2006 Chevy Tahoe 

TRQ
Подписаться 483 тыс.
Просмотров 90 тыс.
50% 1

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/84/aJ/axles-and-axle...
Whether it's due to wear, breakage, or corrosion, a solid axle needs to be replaced sometimes. And when you do, it's best to replace the bearing and seal, too. This video shows you how to install a new solid axle, along with bearing and seal, on your 2000-2006 Chevy Tahoe.
• Check here for more videos on the 2000-06 Chevy Tahoe • Chevy Tahoe 2000-06 2n...
This process should be similar on the following vehicles:
2000 Chevrolet Tahoe
2001 Chevrolet Tahoe
2002 Chevrolet Tahoe
2003 Chevrolet Tahoe
2004 Chevrolet Tahoe
2005 Chevrolet Tahoe
2006 Chevrolet Tahoe
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Pry Bar 1aau.to/oa/1AXAA00020
• 17mm Wrench 1aau.to/oa/1AXAA00010
• 21mm wrench
• 12mm Socket 1aau.to/oa/1AXAA00015
• 13mm Socket 1aau.to/oa/1AXAA00015
• 18mm Socket 1aau.to/oa/1AXAA00043
• 21mm Socket 1aau.to/oa/1AXAA00043
• 22mm Socket 1aau.to/oa/1AXAA00266
• 8mm Socket 1aau.to/oa/1AXAA00017
• Ball Joint Press
• Bearing Puller
• Bearing Race and Seal Driver 1aau.to/oa/1AXAA00038
• Brake Caliper Hanger 1aau.to/oa/1AXAA00084
• Slide Hammer
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Parts Cleaner
• Bungee Cord
• Gear Oil
• Paper Towels 1aau.to/oa/1AXSS00035
• Drain Pan 1aau.to/oa/1AXAA00320
• Floor Jack 1aau.to/oa/1AXAA00068
• Hammer 1aau.to/oa/1AXAA00091
• Jack Stands 1aau.to/oa/1AXAA00065
• Magnet - Extendable
• Razor Blade / Gasket Scraper 1aau.to/oa/1AXAA00280
• Rubber Mallet 1aau.to/oa/1AXAA00413
• Wheel Chocks
• Wire Brush 1aau.to/oa/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Chevy Tahoe 2000-06 2nd Generation: • Chevy Tahoe 2000-06 2n...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

 

5 июл 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 37   
@TRQ
@TRQ 3 года назад
√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*
@TralfazConstruction
@TralfazConstruction 2 года назад
Helpful and intriguing. In August 1990 I purchased a K3500 Silverado. As I began to read about the mechanics of my new truck I soon came to learn that the 1 Ton Chevrolet and GMC trucks had "floating axles" which, if I'm remembering it correctly, simplified the process of replacing a wheel bearing. Has anyone reading this ever done a bearing replacement on a vehicle with floating axles? I never had an issue with the K3500 Silverado in the five years I owned it.
@brownsrvlifecampground9322
@brownsrvlifecampground9322 3 года назад
You made a helpful video for 2021
@chevytruckjerry
@chevytruckjerry 4 месяца назад
This guy has the icewater in his veins of a hall of famer field goal kicker. I love it.
@farazsiddiqui6689
@farazsiddiqui6689 Месяц назад
Well done! I need to do this on a SAAB 9-7x. Very helpful. Thank you!
@hasarito1
@hasarito1 3 года назад
Thanks , awesome how clear you explain.
@philipavila6854
@philipavila6854 Год назад
The c-clip, is tht the only one...when you said same procedure on other side..is their another pin and c_clip..or it's only one for both bearings?? Lmk thanks. Great video .great 411.. thanks
@blakebrowning1851
@blakebrowning1851 2 года назад
Very helpful video, thanks! I have a 99 chevy express 3500 I'm getting ready to open up the differential.(having some ugly sounds coming from it). It has drum brakes in the rear. Any idea if the rear axle shafts are locked in the same as this. Everything else looks the same to me except the disc brakes..
@TRQ
@TRQ 2 года назад
+Blake Browning Thanks for watching our video! 1aau.to/m/Shop-TRQ
@Lgn26point2
@Lgn26point2 Год назад
Do you have a video on replacing the rear hub assembly on a 2002 Suburban. I imagine it is quite different but cannot find the tutorial.
@morley3810
@morley3810 Год назад
Thank you, nice video. I think I would've got that sway bar out of the way...I hate working around stuff if I don't have to.
@jamesmacnaughton8188
@jamesmacnaughton8188 Год назад
Excellent!
@douglasgarcia2731
@douglasgarcia2731 3 года назад
Would this work for my 05 yukon
@alexmoro9095
@alexmoro9095 3 года назад
My rear axle shaft is bent it’s been rubbing making a scraping noise .just bought a new axle shaft today with Bearings
@stevelee4653
@stevelee4653 3 года назад
great video.. thanks.
@joelastevenssr.324
@joelastevenssr.324 2 года назад
What if it has drum brakes???
@DrFiero
@DrFiero 2 года назад
Forgot to put locktite on the cross shaft bolt.
@punachaa
@punachaa 5 месяцев назад
Hello, Just always had question...how does Axle locks to Differential ? I see it is free and no where locked. I saw you pulling it freely.. even that C clip in the differential may not lock it right ? I wonder how wheel is always stay inside differential.why not it slips horizontally outward.
@nicholasanderson8519
@nicholasanderson8519 Год назад
What is the piece behind the bearing in the axle called?
@codywhite8452
@codywhite8452 Год назад
What happens if you can get the axle to go in far I Enough to remove the c clip what causes that issue ?
@aderkk
@aderkk 6 месяцев назад
Are both passenger and driver the same length?
@dubblyewjay1133
@dubblyewjay1133 2 года назад
Does anyone know how you install this bearing? how do a 2002 Chevrolet Tahoe Rear Axle Shaft Repair Bearing
@ManMan-Real
@ManMan-Real 2 года назад
About how long would it take you to do this with no prior experience? Doesn’t look too hard
@TRQ
@TRQ 2 года назад
+Man Man The normal repair time is about one hour.
@jibzz4749
@jibzz4749 2 года назад
Thats pretty quick
@JoseFlores-dj1mx
@JoseFlores-dj1mx 2 года назад
What would you do if the 8mm bolt broke??
@lilbazel
@lilbazel 2 года назад
Its a 5/16
@mbravo9854
@mbravo9854 3 года назад
Do you have to replace the axle? Or is it okay to just do the bearing and the seal??
@blakebrowning1851
@blakebrowning1851 2 года назад
I'd say that you could keep the axle if nothing was wrong with it.
@lichking3711
@lichking3711 2 года назад
no but you need to check for scoring, discoloration, and warpage, although if you had a bent axle you'd feel it as wheel vibration that won't go away regardless of how much you balance it
@73swagin
@73swagin 7 месяцев назад
I've been smacking the axles and I can't get the retainer clip out far enough to grab
@its4264
@its4264 3 года назад
Great video!... just wondering what causes a axel to bent?
@qwertyratchet
@qwertyratchet 3 года назад
I bent my axle by sliding sideways and hitting a pole
@chopparoundz
@chopparoundz 3 года назад
I bent mine sliding sideways and hitting a curb 🤦🏽‍♂️
@juniorjuan131
@juniorjuan131 3 года назад
I bent mine sliding sideways into a curb on a rainy day 😔
@woodworm3615
@woodworm3615 3 года назад
OMG I thought the brake router was going to land on your foot. It was suspenseful at that moment
@guyfawkes578
@guyfawkes578 3 года назад
Or at the very least...the brake *ROTOR!*
Далее
Front Differential Axle Shaft Oil Seal Replacement
13:27
How a CV Axle Works
5:58
Просмотров 2,5 млн
GM - Rear Wheel Bearing / Hub Assembly
16:11
Просмотров 323 тыс.
EASY Step-By-Step Pinion Seal Replacement | NBS Chevy
12:20
Rear Axle Seal Replacement
12:48
Просмотров 558 тыс.