Тёмный

How To Replace 2000-2006 Chevy Tahoe Wheel Bearing Hub Assembly 

Homeowner Repair
Подписаться 100 тыс.
Просмотров 72 тыс.
50% 1

Video Tutorial: This video will show you how to replace the wheel hub bearing assembly on a 2000-2006 Chevy Tahoe.
Over the years the wheel hub bearing assembly can become worn on your Chevy Tahoe if yours becomes worn this should be replaced immediately to help prevent a hub bearing failure. This is a common wear item on many vehicles.
#chevy
#tahoe
#wheelbearing
Buy Replacement Wheel Bearing:amzn.to/2UlT0kO
Disclaimer
Our videos are for entertainment purposes only. It is recommended that you seek advice or help from a qualified professional while attempting any and all repairs.
Do-it-yourself repairs can involve risk and injury, we assume no responsibility or liability for losses, damages or injuries that include but are not limited to direct, indirect, special, incidental, actual, consequential or punitive. All repairs performed by our viewers are at your own risk.
While we do review products that we use daily or have even used for years, we also review and test products for companies that have compensated us to try their product out. We are independently owned, the opinions expressed are our own from personal experience while using any and all products.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Recommended products with links may be commission based when products are purchased from them.

Авто/Мото

Опубликовано:

 

1 фев 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 85   
@HomeOwnerRepair
@HomeOwnerRepair 4 года назад
Buy Replacement Wheel Bearing:amzn.to/2UlT0kO
@williamblair2934
@williamblair2934 5 месяцев назад
Nice to see someone showing an honest video of the troubles. Thanks
@HomeOwnerRepair
@HomeOwnerRepair 3 месяца назад
Thanks for checking us out.
@parisi7
@parisi7 3 месяца назад
Absolutely one of the best videos I have watched. Real situation, not a studio version. Thanks for showing the details of the clips, and all the tricks you used!
@HomeOwnerRepair
@HomeOwnerRepair 3 месяца назад
We try to keep it real over here...lol Glad this video helped you out!
@gregoryrohde
@gregoryrohde 19 дней назад
Great video from a real mechanic on a truck that’s seen real conditions and wear. The Stoicism of New Englanders is the inspiration getting me through my same job. I have an insight: the dust shield is the entire problem. It’s like welding filler rod in there???
@bobolree7733
@bobolree7733 2 года назад
This video was right on spot, everything I ran into was exactly like he said right down to the hub being frozen in. I tried the impact chisel but no go, soaked it good with liquid wrench and used a flat chisel and a 5 lb. hammer before it finally moved. Like he said, if you can buy the shield, do it! It took way too long to make it usable. It took me 2.5 hrs and I had all the tools. Thanks guys.
@HomeOwnerRepair
@HomeOwnerRepair Год назад
Glad this helped you out.
@TotenwutKanal
@TotenwutKanal 3 года назад
I also have to do that job soon. I'm praying right now, that my wheel hub will not be as hard to get off as this one. Holy moly...
@HomeOwnerRepair
@HomeOwnerRepair 3 года назад
These hubs were a pain to get off.
@joseluna3784
@joseluna3784 3 года назад
Tha axle is holding it on..
@runninggag1077
@runninggag1077 2 года назад
I've done three of these. They're alway a pain. You just have to keep working at itm
@jerseyjim9092
@jerseyjim9092 Год назад
Brings back painful memories of beating the hubs off my 2002. They failed within a year of each other. The 2nd one failed while I was driving with no warning signs. Felt like the wheel was going to fall off but I made it home.
@HomeOwnerRepair
@HomeOwnerRepair Год назад
Yes, We have been noticing complete garbage lately on wheel hub quality...It's fusturating.
@kwarren618
@kwarren618 2 года назад
This video was great. I replaced my hub this afternoon after watching. Thank you!
@HomeOwnerRepair
@HomeOwnerRepair 2 года назад
Glad it helped!
@TechmoChamp
@TechmoChamp 11 месяцев назад
Between you guys, the Tappet bros, and this old house folks I gotta a lot of respect for you new englander's Never thought I would enjoy visiting Boston and New England until I went there, great folks up in the North East. Gonna be doing my 2002 tahoe wheel bearing here the next couple days, hopefully a little less stubborn than the one you guys dealt with here. Thanks for the great tutorial, and greetings from Montana.
@HomeOwnerRepair
@HomeOwnerRepair 11 месяцев назад
Thanks for checking us out, hope the video helps you out.
@maccanuck2
@maccanuck2 3 года назад
Awesome . . . I get the freeezies just looking at all that rust. Love the accents!
@HomeOwnerRepair
@HomeOwnerRepair 3 года назад
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
@gilbelisle9035
@gilbelisle9035 Год назад
If no one has, it might be a good thing to mention using a six point wrench on the three bolts holding the bearing to the spindle as they can strip, like mine were, especially in New England or any other region that has lots of snow and subsequent salt.
@HomeOwnerRepair
@HomeOwnerRepair Год назад
Thanks for the added tip!
@docmopar426
@docmopar426 2 года назад
I need to swap out my 01 Tahoe hubs. This was VERY helpful, even though more than expected. Mine is low mileage and cleaner
@HomeOwnerRepair
@HomeOwnerRepair 2 года назад
Glad our video helped you out. Thanks for watching!
@robertsale3665
@robertsale3665 2 месяца назад
Great job And a lot of patience. You got this.💯💯💯💯😂😂❤❤🎉🎉
@HomeOwnerRepair
@HomeOwnerRepair 2 месяца назад
Thanks for watching
@josesoto7018
@josesoto7018 2 года назад
Great video. I have to do this tomorrow and I'm glad I was able to see the issues that can occur with this job. Hopefully my wheel hub bearing comes off easy🤞🏽.
@HomeOwnerRepair
@HomeOwnerRepair 2 года назад
Thanks for watching. Don't forget to sub the channel to receive all of our latest uploads.
@HighperformanceV8
@HighperformanceV8 3 года назад
I already see myself stuck outside for 8 hours 😩😩
@HomeOwnerRepair
@HomeOwnerRepair 3 года назад
Thanks for watching. Hope this helps you out
@HighperformanceV8
@HighperformanceV8 3 года назад
@@HomeOwnerRepair I just hope mines not that difficult tomorrow to do
@steeleflex
@steeleflex 3 года назад
@@HighperformanceV8 how was it I'm about to do this shit this weekend haha
@michaelhughes9139
@michaelhughes9139 Год назад
Awesome video! Great job!👍
@HomeOwnerRepair
@HomeOwnerRepair Год назад
Thank you! 👍
@shonuff5297
@shonuff5297 2 года назад
Knock out to 2 opposite side lug studs.. Run bolts through toward spindle. Put nuts on the bolts. Tighten against flat spots of the spindle. It will drive the hub off even and easy.
@HomeOwnerRepair
@HomeOwnerRepair 2 года назад
thanks for the added tip. Hope this helped you out.
@TechmoChamp
@TechmoChamp 11 месяцев назад
I'm gonna try this on mine using a ratcheting wrench if she gives me any trouble a couple of whacks with the persuader won't solve, great suggestion thanks.
@randyderochie2731
@randyderochie2731 3 года назад
Great job!! I have a 2005 chevy avalanche 1500 LS. Do I have the same hub assembly on my truck as the one in this video?
@HomeOwnerRepair
@HomeOwnerRepair 3 года назад
It may be the same. Check out Rockauto.com
@josesantana561
@josesantana561 3 года назад
Great video. Whats the easiest way to diagnose which wheel is bad if you're not sure?
@HomeOwnerRepair
@HomeOwnerRepair 3 года назад
You can jack the truck up and grab the top of the tire and bottom of the tire to see if there is play in the wheel bearing. I recommend doing them in pairs because if on side is bad then the other side usually goes bad not long after. Hope this helps you out.
@josesantana561
@josesantana561 3 года назад
Do you think it’s a good idea using the power steering to press out the hub by pinning a piece of wood (or similar) between a loosened nut from the wheel hub and the frame of the vehicle?
@HomeOwnerRepair
@HomeOwnerRepair 3 года назад
This Tahoe was a bear. I would rather use the method shown in this video.
@elk2u457
@elk2u457 3 года назад
I have to replace mine this weekend what are the torque pounds used when you put on the different bolts, the three 15 mm and hub nut.
@HomeOwnerRepair
@HomeOwnerRepair Год назад
Sorry just noticed this question.
@thatguysemperfi171
@thatguysemperfi171 2 года назад
That 600 doesn’t sound to bad after watching this.
@HomeOwnerRepair
@HomeOwnerRepair Год назад
lol..Yeah this one was a bear to get off.
@RichardJones-fz7fq
@RichardJones-fz7fq 3 года назад
I’m doing one now and was thinking about pulling the cv axle out so I can beat it from the backside
@HomeOwnerRepair
@HomeOwnerRepair 3 года назад
Thanks for watching
@williamtoon6021
@williamtoon6021 2 года назад
Might not be a bad idea.
@andrewcordova8400
@andrewcordova8400 3 года назад
Is it okay to use grease there? Where u put the never sez? Or they both kinda the same,I've seen videos where they didn't put anything there
@HomeOwnerRepair
@HomeOwnerRepair 3 года назад
You should follow the same procedure as show in the video.
@andrewcordova8400
@andrewcordova8400 3 года назад
@@HomeOwnerRepair not very helpful I've heard both.. Grease or never sez or are they both pretty much the same? Simple question
@HomeOwnerRepair
@HomeOwnerRepair 3 года назад
If your referring to the opening in the knuckle where the hub goes, you can use a little grease on it if you do not have never seize.
@ortizdominguez4190
@ortizdominguez4190 3 года назад
Ey man I got a 2001 Tahoe with a bad sway at freeway when hitting a bump all of suspension has been replaced any recommendations to fix it
@HomeOwnerRepair
@HomeOwnerRepair 3 года назад
Are the shocks new, also check the sway bar links to see it they need to be replaced. Hope this helps you out.
@TheRoyJames
@TheRoyJames 3 года назад
Not sure if you fixed it but if you've done the shocks did you do the coil springs in thee rear? Fixed my problem
@danielcoffey5380
@danielcoffey5380 Год назад
Are u post to bet the half shaft seal back. If not I have put a half shaft or a cv on it and went everything is put on it rums
@HomeOwnerRepair
@HomeOwnerRepair Год назад
Thanks for watching.
@Brian-um9zz
@Brian-um9zz 2 года назад
glad i dont live in the saltbelt states anymore...hated working on brake and suspension parts!!!
@HomeOwnerRepair
@HomeOwnerRepair 2 года назад
It's horrible around here. The sodium chloride really kills our vehicles.
@TheCharger225
@TheCharger225 2 года назад
My son is doing this right now. The bearing split in half from beating on it with a sledge hammer, the back of the bearing assembly is still in there. How many hours did it take from start to finish? I saw 2 hours. He has the cv joint removed, can he hit it from the back to knock it out?
@HomeOwnerRepair
@HomeOwnerRepair Год назад
It took a while.
@charliehighman6095
@charliehighman6095 2 года назад
I'm about to do my 05 tahoe tomorrow same side in a hillbilly trailer park in -2° F weather with 17 inches of snow i'm about to have some fun YEE HAW lol
@HomeOwnerRepair
@HomeOwnerRepair Год назад
eesssh, how did you make out?
@betoraygoza9859
@betoraygoza9859 2 года назад
Hey my tahoe hub doenst move like that but when im driving its makes a noise i already check everything and its looks fine so i thinking the hub is bad and tips to.make sure its the hub n not something else
@HomeOwnerRepair
@HomeOwnerRepair 2 года назад
Hubs are a common wear item that is common to have to replace, especially if the truck has over 100,000 miles on it. If they are making noise you may want to replace them. Hope this helps you out.
@williamtoon6021
@williamtoon6021 2 года назад
Yeah, jack it up. Put hands at 12 and 6 and shake tire, then 3 and 9 and shake again. Hopefully no wobbling. Go on you tube because I dont remember what the significance is and check around. I think 3 and 9 are ball joints. Looks like 12 and 6 is wheel bearings. Hopefully you dont have both! Good luck!
@chrisbam806
@chrisbam806 2 года назад
Is this the same process for a 4x4
@williamtoon6021
@williamtoon6021 2 года назад
Yes
@HomeOwnerRepair
@HomeOwnerRepair Год назад
Yes.
@markroberts4444
@markroberts4444 2 года назад
How much does a shop charge in 2021 though?
@HomeOwnerRepair
@HomeOwnerRepair 2 года назад
A lot of shops are 100-125.00/ hour now so it adds up
@marcmcclinchy9774
@marcmcclinchy9774 3 года назад
My hub is pretty rusted on how do i get it off
@HomeOwnerRepair
@HomeOwnerRepair 3 года назад
This video will show you how. It was a real pain on this truck.
@SHANNABARNES-vf4cn
@SHANNABARNES-vf4cn 8 месяцев назад
Is this a 4wheel drive
@HomeOwnerRepair
@HomeOwnerRepair 8 месяцев назад
yes this is a four wheel drive Chevy Tahoe that our wheel hub bearing replacement video was filmed on. Hope this helps you to replace the wheel hub assembly on your truck.
@joosama6806
@joosama6806 4 года назад
Kia Sportage.... 2.4...... GDi... 2015 spark plugs
@HomeOwnerRepair
@HomeOwnerRepair 4 года назад
I'll keep this in mine when we do our 2018 Sportage
@scottmurray4689
@scottmurray4689 3 месяца назад
Someone please explain to me why someone with a shop, lift and high power air wrenches would need to watch a video like this. What about the vast majority of people with no lift, no air wrenches, on a gravel drive way? Just sayin'
@HomeOwnerRepair
@HomeOwnerRepair 3 месяца назад
We have had other mechanics watch our videos to see what they are getting into. Schools have watched our videos as well to train students.
@scottmurray4689
@scottmurray4689 3 месяца назад
@@HomeOwnerRepair But what about the average guy with no lift, no air wrenches, sitting on his butt in his gravel driveway? Plus, you skipped a trick or two to make this easier. If you're SO sensitive to feedback, maybe you should find another hobby.
@bmathers21
@bmathers21 2 месяца назад
​@@scottmurray4689I don't have a lift or air tools... I watched this video and gained everything I need to do this same process on jack stands. The only difference is I'm laying on my back while doing it and slipping a 1" pipe over my ratchet because I'm not spending $100 on a breaker bar lol. His response wasn't sensitive either... You're the one being whiny and sensitive. I saw you leave the exact same comment on the TRQ tutorial for this process. Chill out and go fix your truck already lol
@jimshortes
@jimshortes 9 дней назад
Yeah scott quit being so whiny and go get something done
Далее
Chevy / GMC Front Wheel Bearing / Hub Assembly
40:01
Просмотров 1,6 млн
Наше обычное утро 💕
00:42
Просмотров 422 тыс.
Я ВЕРНУЛСЯ 🔴 | WICSUR #shorts
00:57
Просмотров 2,3 млн
How to 100% diagnose a bad wheel bearing.
6:30
Просмотров 1,4 млн
ОПТИМИСТИЧЕЫЙ ТРАКТОРИСТ
0:19
что за звук?
0:15
Просмотров 560 тыс.
РЕЗКА РЕЗИНЫ ДЛЯ ШИН
0:40
Просмотров 7 млн