How To Replace Rear Brake Shoes 1995-2010 Toyota Corolla

Подписаться 200 тыс.

Просмотров 382 тыс.

50% 1

Here are some of the tools that jimthecarguy uses
www.amazon.com/shop/jimthecarguy
Easy to follow step by step directions how to replace rear brake shoes & drums 2001 Toyota Corolla.I will also show you how to adjust the brakes after you replace them.
The bolt is M8x1.25
Due to factors beyond the control of jimthecarguy, it cannot guarantee against unauthorized modifications of this information,. jimthecarguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. jimthecarguy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of jimthecarguy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not jimthecarguy.

Авто/Мото

Опубликовано:

18 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 311

@luisg8946 Год назад

Sir, There is NO WAY someone else could’ve explained it any Better than you. You did a Fabulous job. Thank You Very much.

@michaelbaucum6787 3 года назад

Little painful to deal with the camera work, but the speaker does a nice job explaining everything. Thank you!

@rockroll9513 3 года назад

Do not pinch the brake line. As long as nobody applies the brakes you won't have any problems. There's not enough pressure to pop the cylinders out when the brakes are at rest, unless something else is wrong with the vehicle. Also, avoid touching the brake lining on the shoes. Otherwise a very good video. Really good idea to remove that c-clip before removing anything else.

@EricVonHunter 3 месяца назад

There's residual brake fluid. Just like calipers

@rockroll9513 3 месяца назад

@@EricVonHunterit's not residual. It is full of fluid but not pressurized. Never pinch brake hoses.

@kraftfamilyadventures2100 Год назад

Jim: Thank you so much for putting out your content. I just did my rear brakes drum brakes following your video, and my wife's front and rear disc brakes foillowing another one of your videos. I'm definitely no mechanic, nor even a car enthusiast. However, I'm very grateful to have the savings that the labor would have cost here in a major metropolitan area. I also like the fact that I know the job is done right. My 13 year old daughter worked along with me, and now she's learned a new skill as well. Sincerly, thank you again.

@ivanokovnunya4320 3 года назад

The first pair of shoe brakes took me 3 hours. By the second I was able to do it in 30 minutes. Love the video. Super easy to understand and very informative. The cameraman did their best! Didn’t hurt the flow of the video for me.

@lydiahubbell6278 Год назад

Mine has taken all week!! It took me about 3 hours just to get the parking brake cables reattached snd those adjuster springs!

@Usmanthemecano 4 года назад

The cameraman had one job to do...

@billziegmond4943 4 года назад

Glad to see I am not the only that fights the hold down springs. LOL

@najibyardam956 2 года назад

God bless you man! I found this video very helpful and was able to do my own drum brake replacement. Unfortunately the drum was stuck and the pilot hole was damaged so had to use force and broke one of the springs. I'll have to pickup replacement tomorrow. Funny thing is when i picked up the shoes, the guy asked if i wanted the springs as well and I said no...live and learn.

@lydiahubbell6278 Год назад

better to buy the hardware kit and not need it, than need it and not have it,

@earlemorgan5068 3 года назад

BundysGarage My friend and I put drums and shoes on the rear of my 2010 Toyota Carolla successfully with the help of your tutorial. We have never done drums and shoes before. Thanks a heap!

@greeneyesfromohio4103 3 года назад

How did you adjust the ebrake bro??? After doing my rear drums my ebrake was loose and didn’t hold at all…..I think you adjust it by the star adjustment but then I’ve seen videos where you have to remove the center console and theirs an adjustment nut at the base of the ebrake, I’m confused??

@EucliFox 3 года назад

This was the only video that really explains and shows really well what’s going on was finally able to get these installed

@thomastommy1192 4 года назад

As always an awesome great video. Thanks for sharing your video. I truly hope you are having a blessed week.

@ehsansalehi658 4 года назад

Thank you sir. I personally appreciate that. love to see that. despite I'm not a mechanic, enjoyed alot.

@orlandorojas439 8 месяцев назад

Great tutorial, camera work not so much. I appreciate the very concise details. I always struggle with drum breaks, trying to get everything to stay together, while putting the springs or clips on. Thank you for simplifying the steps.

@TheDisgruntledMechanic 4 года назад

nothing like a good drum brake repair job! great job Jim.

@caydubb 4 года назад

Very informative!! About to use this knowledge to do my rear brakes! Thank you for showing everything step by step!👍

@jimthecarguy 4 года назад

Glad it was helpful!

@semco72057 4 года назад

The last vehicle I changed the drum brakes on was a 1987 S-10 Blazer which I still have, but don't drive any longer. It wasn't that easy, but it seemed to be easier than the ones on that modern car you worked on. I didn't know they still had drum brakes on them, but it is easier to work on with the right tools and I still have the ones I used on the Blazer. All the other vehicles I have use all new braking system and that makes it easier to work on.

@Webslinger-ol6ui 2 года назад

Thank you so much for this video! I have only done disk brakes and I was able to get my wife’s Corolla brakes done! Thank you 🙏

@yonggonlee 4 года назад

Ha, I just found out my son's old Corolla has rear drum brake which I have never dealt with. And your detailed video made me confidant about what I need to to with it. Thank you!

@jimthecarguy 4 года назад

Glad it helped!

@martinjcamp 2 года назад

It's really nice to watch a REAL PROFESSIONAL. Thank You for the fine Instruction!

@user-uo3pb3rr4f 6 месяцев назад

best instruction. i'm merely a few min in. compressing the pistons is great advice . the time spent backing off the adjuster is well worth it .

@harpomarx7777 4 года назад

Getting dizzy from the camera floating and jiggling .. punched out.

@robertbutler8004 3 года назад

smart move

@chrisparenti2461 4 года назад

Nice, a little easier than most drums. Just wish the hold down springs were easier. 100 years of innovation and the same headache springs 😜

@holywood60 4 года назад

Thanks a bunch for the video, clear instruction. Hard to film this tho, hats off to the cameraman, but I had to have a drink afterwards!

@lonwillis783 4 года назад

Thanks Jim Love the video! Thank You!

@TheYotaMan 4 года назад

Such great informative videos!! Keep it up!!

@feddy11100 2 года назад

Clear, concise, and informative. Thank you for this!

@jimthecarguy 2 года назад

Glad it was helpful!

@ronalddavis6363 8 дней назад

Hi, This is the best explanation I have ever seen. I can now install my brakes with confidence. Thanks for a great demonstration.. The BEST!!!

@jimthecarguy 8 дней назад

Great to hear!

@rbelang8331 2 года назад

Thanks so much! I did mine this morning for the first time... with your help!

@gbgentry9295 3 года назад

You rock Jim! Thanks for the real-life video.

@hibbs79 4 года назад

Good video thanks. But sack the camera man. Maybe you'd be best off with a tripod?. Don't mean to criticize just would transform your video.

@NYRican1505 3 года назад

Man this video definitely gives me confidence to do it myself, buying new shoes and drums next week to do it on my own, thanks jim

@Critter0817 Год назад

How'd you do?

@NYRican1505 Год назад

@@Critter0817 good

@jt184 4 года назад

Thanks..now I'm not afraid to try it myself. I'm glad he slowly went through the steps so that a layman such as myself, doesn't feel intimidated...

@jimthecarguy 4 года назад

Glad I could help!

@902hondacrazy 8 месяцев назад

This is incredible! Thank you so much watched this before I went out to do mine for a refresher! Very detailed info

@nickaleo7 3 года назад

I appreciate the time you took to film this and your effort to show us how to do this, but that camera needs a stand my brother. I bought one on amazon for $20, well worth it. Anyways thanks for your time. Take care

@jesussaves6671 3 года назад

you are a good teacher. I was not sure how to do it but now I feel confident. Thanks a lot.

@jimthecarguy 3 года назад

Glad I could help!

@thomashjatna3231 Год назад

Thanks alot for the video. I did what you told me and the breaks are as good as new now.

@peternevai8929 3 года назад

Never ever use anything to pinch rubber brake lines. Especially old rubber lines, you may cause a weakening or damage of the rubber and risk the line failure and catastrophic brake loss. Also this procedure can be completed in half the number of steps Removing the hold down springs from the shoes and then disengaging the bottom spring allows both shoes to be removed and disconneted without having to pry around behind the wheel hub.

@TuanTran-er9yl 2 года назад

100% corrected.. never messed around with the rubber brake fluid line...you don't have to pinch the brake fluid line anyway.

@Caje-zf8md 4 года назад

Very nice tutorial. Thank you for the classroom instructions. All I need now is some brake grease and I'm ready to go.

@yosoyelcorrido 4 года назад

Very well explained! Thanks for sharing your knowledge, blessings

@jimthecarguy 4 года назад

You are so welcome

@ozzstars_cars 4 года назад

Nice one Jim. Old school shoes!

@donaldsaunders4736 3 года назад

Thank you Jim I just bought a 2009 and I'm gonna replace the rear shoes👍

@jimthecarguy 3 года назад

Thanks for watching.

@fleaniswerkhardt4647 2 года назад

Great video - very informative. Only thing to recommend is that the camera guy gets a tripod for the next video.

@RBJDiaz 3 года назад

Mr.. Thank you so much for your video a friend of us came and ask me for help for a brake charge for this car your video help me so much thank you!!.

@inhibited44 11 месяцев назад

That's a neat trick putting screws in to separate the drum from the hub. I see that on my rotors, but never noticed it before.

@AntonioClaudioMichael 4 года назад

Good trick with the bolts to remove the drum Jim

@busman1144 3 месяца назад

Excellent video. Very informative and you make something that is a little complicated and make it easy! Your car looks immaculate! Thanks for posting.

@Rajmigi 3 года назад

Thanks Jim! This is helpful watching from calgary alberta canada.

@axenz1 4 года назад

Good tip by removing the clip first. I never do this , I usually remove the hand brake cable then the clip , Thanks

@Newyorkian2023 4 года назад

axenz axtiz sane here

@bachoy88ledz25 2 года назад

Thank you for the video sir now I can do my own brake job. Awesome...👍👍👍

@Drop_N_Chop_LLC Месяц назад

That was the best tutorial video I ever seen in my life

@alext3437 Год назад

Excellent job explaining and a true pro. Thank you.

@tonycazares9717 2 года назад

Thank you so much Jim for posting this great video. God bless

@williyamaustin2106 2 года назад

Wow!!! Thank you I learned lot from this vedieo. I was trying to pull out my brake drum it was very difficult n stuck in. I think i can remove now.

@hollimon100 Год назад

I work on cars myself but you just gave my greatest game on putting the vice on them spring’s thanks

@OntarioLakeside 2 года назад

great video. Thanks very much. My 2010 corolla (Canadian) was not exactly the same, but I was able to complete the work.

@jimthecarguy 2 года назад

Glad it helped

@martinalbach5599 4 года назад

excellent video very informative thanks Jim!!!

@jimthecarguy 4 года назад

Glad it was helpful!

@timb3925 4 года назад

Great video 👍

@NickSupe 2 года назад

sweet thanks. thought it was gonna be harder than it was. got it done in an hour. you don't have to pinch the brake line, and i didn't have a washer behind the clip on my 2010 corolla. followed everything else step by step though

@VinayakGovande 3 года назад

Great illustration. Thank you Sir

@_b_l_v_dboy9440 3 года назад

Great video I did my first drum while watching this ☝️

@jdmckelvey5567 2 года назад

I’m so thankful for these videos.

@AntonioClaudioMichael 4 года назад

Great video Jim

@peterwallis4602 Год назад

A thorough explanation Jim, well taught. Many thanks. From Western Australia

@jimthecarguy Год назад

Glad it was helpful!

@manuallabor7193 4 года назад

I hate to do drum brakes. But I do not mind watching you do them. Another great video.

@chuckschillingvideos 4 года назад

Yeah, it's way too fiddly. I haven't done a drum brake job in thirty years. Got an 07 Corolla just landed in the driveway that's just taunting me.

@agatemaster4243 3 года назад

Thanks, great video, very helpful.

@Norman1965arg 2 года назад

Thank you for a great informative video.

@aidanboutabag7465 2 года назад

Helped a bunch thanks.

@RandyNewmanFan 3 года назад

So helpful. Thanks

@buckpeter 4 года назад

First time doing drum brake soon,watch lots of you tube clips,why some people's criticized others ,when some one showing us how to do it.thanks Jim.

@lozarok 3 года назад

good stuff mate - cheers

@britfliptop 2 года назад

Great vid, Well explained, Nothing fancy. Thanks

@jimthecarguy 2 года назад

Glad you liked it!

@AntonioClaudioMichael 4 года назад

I found doing drum brakes extendable magnets come in handy

@stevejette2329 Год назад

So often, You Tube presenters know their subject but not videography ... lights, camera, script, sound. Lights that are not too much or little and don't cast shadows. Camera without shake, blur, getting the right angles and distance. Script to be not repetitive, not miss anything. Sound without extraneous noise, clear vocals, action sounds like hammering not too loud.

@perryhoward5064 2 года назад

Great detail , thanks much

@leftcoast2681 Год назад

I believe the car you're working on is a Japanese-assembled Corolla; the spring setup is a little different on USA/Canada models. Killer idea on the initial horseshoe clip removal while the shoes are still mounted...use the hardware for your "bench" vise! (I don't believe you can do this on US/Canadian models, as the horseshoe clip is on the inside of the post.) Nice video...thanks!

@AbdulRahman-bv3yx 3 года назад

Very nice job 👍

@akanesoratobu8889 2 года назад

what size bolt did you use to take off the drum cover?

@jaysuncho 2 года назад

Thank you for the video. I changed the pad after watching your video today. After the replacement, the brake pedal goes deep and it doesn't brake well. What's the problem? The piston fell out a few times and the brake liquid flowed. Is that the reason? Or is it wrong to assemble it?

@brianarsenault9281 3 года назад

At the 10.26 min/sec you mentioned sometime I found very important; when I did my brakes I didn't pinch off the brake hose (to relieve the pressure) and as a result brake fluid started leaking from the brake cylinder. Unfortunately, as a result of missing this step (not pinching the hose) it later turned into a problem where I had to replace the wheel cylinder.

@TherealDannyO Год назад

Normally the brake cylinder doesn’t just pop out. Something was either wrong, or someone pressed the brake pedal forcing fluid into the cylinder and popping out those pistons. I’ve never pinched my brake line because if it’s old and stiff, it will crack/break, and now you have a whole other problem.

@michaeltoth4695 2 года назад

That was a great explanation. Thanks!

@jimthecarguy 2 года назад

Glad you enjoyed it!

@busman2000 4 года назад

Do you have a video that teaches how to adjust the handbrake after you have replaced the shoes? Would you normally replace the wheel cylinders at the same time?

@silkmd Год назад

Very good vid. I got 94 corolla and like replace rear wheel brake cylinders (i tried to get it out but i couldn't ) Do you have any suggestion or vid. that show how to) thanks

@Rm4n 4 года назад

Can i use grease instead of the brake lubricant? Thanks for the video

@ramongonzalez1303 3 года назад

Great video)

@pedroayala326able Год назад

great explanation thanks

@robertreed1817 Год назад

The brake spring tool mix taking those springs off and putting in back on so much easier

@MarzNet256 2 года назад

Excellent video.

@192ali1 3 года назад

Thank you. Excellent.

@jimthecarguy 3 года назад

Glad it was helpful!

@inhibited44 11 месяцев назад

After this is done, does the brake pedal start applying earlier? I have done it before once, bu t don't remember. I put new calipers , rotors and pads on . Brake pedal is firm, but not high up enough. Starts applying half way

@TawandaKanengoni 3 года назад

thank you very helpful video

@jimthecarguy 3 года назад

Glad it was helpful!

@classicstangbrn8964 2 года назад

What year are you working on, mine is a 2001 with 5 lug and the springs and hardware is different, also if you remove the 4 bolts that hold the hub and pull the hub it makes it a lot easier to work with.

@Ruben901 4 года назад

Can this method work for any model type of vehicle?

@cza5543 4 года назад

Thank you sir!

@jimthecarguy 4 года назад

You are welcome!

@frankcobas139 7 месяцев назад

Excellent video. Thanks

@jameshirt1395 4 года назад

what size are the bolts used to remove brake drums???

@AirplaneFreak 4 года назад

12 MM is the bolt size for that hole in the rear drum.

@raphaelchicago9138 3 года назад

M8x1.5

@dknana123 4 года назад

Jim, thank you for all the automotive instruction you have provided over the years. With that said, I have to say this is the one time I had a hard time following you. I think the camera guy and you were not in sync during this repair.

@jimthecarguy 4 года назад

Thanks for watching.

@SamuelHollandsh 2 года назад

Thank you very much. 👍

@user-lj1py2qh8f Год назад

Thank you for the video! **Question for my car people: I changed my rear shows successfully, but in the process my ebrake got loosened or detached. My ebrake was working perfectly before and now I can pull the hand brake all the way up and it doesn't seem to do anything. How can I fix this pals??

@greeneyesfromohio4103 3 года назад

Please, I need help……my ebrake is loose and doesn’t hold, to adjust and tighten it do you mess with the star adjustment or no? That’s what it seems like in this video but in other videos I’ve seen the e brake is adjusted by removing the middle console and theirs a adjustment nut on the ebrake handle??? Which is it???