How to replace rear rotors and brakes on Ford FUSION HYBRID 2019

Подписаться 5 тыс.

Просмотров 16 тыс.

50% 1

Dealers and all mechanics quoted us around 600$ for this job, so I did it myself. This is totally DIY project with the right tools. This vehicle is 2019 Ford Fusin Hybrid Titanium trim. We replaced rear rotos and brake pads.
DISCLAIMER: All information displayed in the video is for entertainment and informational purposes only. You can't treat it as professional advise. Should you decide to act upon any information in this video, you do so at your own risk.
Music from Tunetank.com
RocknStock - Power (Copyright Free Music)
Download free: tunetank.com/track/1458-power
1....You will need 17mm Allen Socket to remove caliper sliding bolts
2....Also 15mm socket to remove caliper bracket
3....Torque wrench highly recommended for this job.
4....Caliper bolt grease.
Information about Ford torque specs found here:
ford-specs.com/cars/2019/fusi...

Авто/Мото

Опубликовано:

8 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@leahmyers2610 2 месяца назад

Thank you so much for posting this - I have done brakes before on vehicles but this was different due to type of piston - has to be turned, I was little shy to take on the project but after watching your video and guidance I was able to do the rear brakes on my car. I appreciate it. thank you made this easier for me because I too did not want to pay 600 for someone else to do it have a great weekend.

@nazarettos6987 2 месяца назад

Were you able to put rear emergency brake into service mode like I did?

@dghezzo Год назад

The 2 notches on the piston face need to be facing up and down so they line up and mate with the notchs on the back of the brake pad. You now have a non-planer surface mating on your brakes causing uneven brake pressure on the pad and rotor. Gonna cease and warp in a few months! Advise pulling the pads, twist the piston 90° and all should be good if you haven't driven too many miles.

@duyenchau8167 Год назад

Good mechanics, Naz.

@jackinsedareus2032 Год назад

Thanks for the vid, about to do mines tmrw on my 2020 Fusion SEL 💯

@nazarettos6987 Год назад

Just make sure you lubricate for sliding pins and turn in calipers in place. Easy

@demetriusbanks3934 6 месяцев назад

I’m watching this video while replacing my brakes and rotors

@zenoviygoy8854 Год назад

Great help

@anthonygendron5648 9 месяцев назад

I would say the most difficult part is putting the car in and out of maintenance mode, but even that was pretty easy. I replaced both rear rotors and pads on my brother's car, he timed me on the driver's side and I had it done in 20 minutes flat, including jacking the car up and I had no power tools. I also had to use a torx T45 bit instead of the 7mm allen bit because I don't have allen bits that size. Good tutorial overall

@nazarettos6987 9 месяцев назад

Appreciate your beautiful comments

@user-kx5vt3if5h 8 месяцев назад

Do you leave the car on in accessory mode while replacing the pads and rotors?

@knowthedealtv Год назад

Thank you papa

@nazarettos6987 Год назад

Papa?

@isaaclopez9031 9 месяцев назад

Do you have to bleed your brakes after changing rotors and pads? Also, should you put the car in brake maintenance mode if you're changing your front brakes as well? Thanks for the video.

@drakeperales6387 Год назад

I noticed you were having trouble pushing the piston in at first then it jumped to already pushed in. How did you get it pushed on because I’m having the same issue. It won’t budge when I try to push it in

@nazarettos6987 Год назад

Turn it in clockwise

@drakeperales6387 Год назад

@@nazarettos6987 ya didn’t budge. It was almost like the electric brake system was still on but I put the car in brake system maintenance mode and everything.

@louiemartin3338 5 месяцев назад

What was the reasoning behind opening up the lid in the hood?

@nazarettos6987 5 месяцев назад

When you compress the brake piston, the fluid in the reservoir will back up a little bit. Also I was going to check if we need to add some brake fluid after the job was done.

@MrJeepmarine 10 месяцев назад

The hardest part of the job is taking it in and out of maintenance mode.

@nazarettos6987 10 месяцев назад

I honestly didn’t have any issues with putting it in service model taking it out of service mode. We just have to try a few times and it should work. Make sure to twist the piston into place.

@musik1494 21 день назад

why did you put grease on the outside of the brake pads? That makes absolutely no sense!

@nazarettos6987 21 день назад

@@musik1494 when gain experience over the years you will understand

@musik1494 21 день назад

@@nazarettos6987 what a ridiculously embarrassing answer 😂😂😂 It sucks if you have no idea, right?

@andykolbin1783 3 месяца назад

You dont need that tool. You put car in service mode and just push calipers in with regular brake compressing tool.

@nazarettos6987 3 месяца назад

Thanks

@MrJeepmarine 10 месяцев назад

My 2019 Fusion hybrid Titanium won't go into maintenance mode.

@morris4morris 11 месяцев назад

After hours of this BS, and eventually tearing the boot trying to get the piston back in on my Ford Flex, and then towing the car to my mechanic, he said, "stop trying to be a mechanic, and I'll stop trying to be a pressure washer" (I own a wash company). Enough said. Here's my $600.

@nazarettos6987 11 месяцев назад

Well in my video i had no problem, you turn in the piston but you also have to put brakes into service mode. You could have stuck calipers. Thanks for commenting

@keithgore6285 4 месяца назад

Some people just aren’t mechanically inclined and yes the auto shop might be the right answer for some. Don’t blame this man for trying to save a few inclined people a dollar.

@lakorai2 2 месяца назад

Your calipers are probably bad. The piston might be rust seized in the bore. That is quite dangerous and your calipers will need to be replaces and the brakes bled.

@lildaney82 Месяц назад

must be nice to have the money to just pay up 😅 ..ill take the "hours of work, confusion, and the satisfaction of a piss-poor job well done" for only 60 bucks please, Alex