How to Replace Spark Plugs in a Honda Ridgeline 2006-2014 (Complete Guide for Front & Back) 

Learn how to change out your spark plugs in a 1st generation Honda Ridgeline for both front and back spark plugs. The Tools: 00:29 • Ratchet - amzn.to/3xWjE5g • 6in Socket extensions - amzn.to/3uwhLKx • 6mm Allen Socket - amzn.to/3l3F9Nt • 5/8 Spark Plug Socket - amzn.to/3BKVOLE • Torque Wrench - amzn.to/3yawY5K • Gloves - amzn.to/3bbfEnu • Shop Towels - amzn.to/2SC8D93 • Spark Plugs NGK - amzn.to/3l9yt0t • Anti-Seize Lubricant - amzn.to/3x8qsv4 • Step Ladder - amzn.to/3bg8azE • Flat Head Screwdriver - amzn.to/2RAjTlU This video was done on a 2006 Honda Ridgeline RTL 3.5L V6. But it should be very similar to all other makes and models, make sure to check for your exact vehicles fit for spark plugs and other specifications that you will need to follow to ensure the job is done correctly! The Intro 00:07 The Tools 00:29 The Fix - Front Spark Plugs 02:21 The Fix - Rear Spark Plugs 18:04 The Closing 38:12 Check out my website at mcfixit.us Disclaimer: Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT. #mcfixit #autorepair #oilchange #repair #maintanence -- Supplies used to record this video: * GoPro Hero 7 Black - amzn.to/3f3ALtb * 256GB Flash Drive - amzn.to/33pAueG * Vlogging Frame - amzn.to/33tajE0 * GoPro Pro 3.5mm Mic Adapter - amzn.to/2RCURCu * Youmic Lavalier Lapel Mic - amzn.to/2R55sWX * Boom Stand (tripod) - amzn.to/3bdkQaw * 5/8” to 1/4” adapter (boom to blogging frame- amzn.to/3txrVsM * Portable Battery Powerbank- amzn.to/3vJQc0q * 6ft USB to USB-C (powerbank to GoPro)- amzn.to/3uAS5MH

Really great job on this video! 👏🏼 I love when I find someone who explains things simply and efficiently without belaboring the process or missing critical details. Solid work.

Thanks for showing how to do the rear plugs. I watched another video and they skipped that part completely.

THANKS LARGE MC! Without this tutorial I really didn't even want to try because of the rear plugs and coils which looked inaccessible - about an hour plus with recommended breaks and patience. 2013 Ridgeline and one convenience I had was I have a flexible 4" 3/8 extension which is no good for cracking or torquing but very helpful fishing out the socket after taking the solid extension off and also starting the new plug then switching back to solid - esp on that left rear one which was the most difficult; I was able to unclamp & flex the hoses on the right rear to get at it ok. Again, thanks, Jim.

Just wanted to thank you for this tutorial. Thanks to you I successfully replaced all 6 of my spark plugs and coils. I’ve never worked on my truck before. I encountered only one hiccup when the boot on one of the coils disintegrated and lodged inside the spark plug tube. I extracted it but by bit with a pair of Hemostats, then vacuumed out all the remaining bits. Otherwise, it was a smooth install!

Great video! Thanks for showing both the front and back side of the how to do this project! I love your videos! Keep it going

Thank you very much for this! I'm going to re-watch a few times and take more notes. Showing it to my friend who is going to help me with this when my parts arrived.

Thanks for showing me how to change my spark plugs for my truck!

Thanks for great instructions

Cumbersome work, but still a relatively easy job, if as you say, a person just takes their time. Nice RU-vid.

Wow, this was super helpful!

I hope you get the credit you deserve! Thank you very muc sir!

Excellent video. Very detailed. Great job.

thanks bro, great video

Great Presentation, you did an awesome job.

Thanks you've helped me out immensely !

Great video, thanks!

Good Vid. thanks for posting

Thanks for the video. I just changed all my plugs and all my coils (why put the old coils back?). One tip. I found it much easier (on the rear plugs), to unscrew the plug, remove the ratchet, pull the socket/spark plug out until you can grab it with your other hand then pull the extension out of the socket. It makes it far easier to pull out the plug. Reverse to install.

WoW, good job, TY from CA

Not sure why but I didn't have enough clearance had to remove fan,no front end damage

Hey huge fan but i have a question. I have a 2007 honda ridgeline and my engine bay really needs to be cleaned can i preasurewash the bay at alike a self wash. Also will changing spark pmigs fix a misfire on 4 code?

Did you use dielectric grease? I didn’t see you use any in the video but you mentioned it in the required items in the beginning of the video

It appear it's difficult to change at the back portion.

Truck shaking on start, how does the engine mount look?

Too much work for me. I will pay instead. Awesome tutorial tho thank you!

Is there crush washers involved?

Where did you find your specs for torque?

What’s that glue u putting there ? Necessary?

Your video quality is good, but this video is 38 minutes long and could easily be under 10. I know everyone has different skill levels, but seriously no one needs or wants to watch you wrench on a spark plug.