How to Replace Starter 02-06 Nissan Altima L4 2.5L 

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

Just gotta say, youre timing is insane. Starter went out today. You have saved me nearly $1000 in labor costs to date. Thank you for all you do. There arent many comments here but I know thousands of people (especially low income) could not be more thankful for such an amazing teacher on youtube while we tinker and learn about our cars.

Just saved about $450 for this replacement. You guys are single handedly responsible for me not wanting to drive this Altima off a cliff!

For what it is, the editing for this video is very clean! Thank you for making clear and informative videos like this one.

Just the best car repair videos out there. Saved me thousands over the years and given me the confidence to replace almost any part on my car.

There's a lot of places to buy parts but I buy some 1aauto because of this videos. You've saved me a ton in labor! The woman mechanic showed me how to do wheel bearings on an 05 Lexus ES330

Watching the videos is like therapy for me.

Thank you sir Why can’t everyone make a simple video without having to give there life story before telling us how to not fix the problems So again thank you I can always count on you and your channel to get any job done

Everything I have learned about my cars I have learned from you guys! Thank you so much! I’ll never go to a mechanic again

These videos have legitimately saved me thousands of dollars

Excellent video - no fluff or bs or click bait. Just a straight up installation video with good information to supplement the replacement of the starter.

This was hairy for me because I didn't have the right extension. Mine were too long or too short. 6inch would've been perfect. Overall not a bad repair at all, but I could not have done it without your video. It covered all the necessary parts and you saved me some hassle by stating which size sockets I would need for each bolt. Thank you!

Your videos are great! I’ve worked on two separate issues using your videos and they were all clear and detailed. Thanks for helping us out!

All my girlies should watch! You guys were a big help with my throttle body now it’s time for the starter! Thanks you guys!

I had no idea where the starter was. This video seriously helped me get my girls car started this morning. She praised me in more ways then one lol. Thanks bud!! Instant follow!

you guys are literally the best have helped me change my alternator my spark plugs my starter and throttle body love you guys !

I just wanted to say thank you very much for this video. I have the same exact model car and your video made installing the starter very easy. Thank you for taking time and making this video. We are grateful to you!! 👏🏽👏🏽

Thank you for this video. Got stranded on a road trip and this helped solve my problem. Was just a bit difficult finding the starter on the stick shift model but other than that thank you 🙏🏽

Thank you So Much for this video. I had never heard of you guys before but you have earned my business. I will always check you first from now on when I need parts. These videos are extremely well done. I’ve made tutorials videos and I know how difficult and time consuming they can be.

A word of warning. These starters will give you about a months warning in advance when they are going out. I tried stretching that and had to get the car towed home, luckily I wasn't far. Great Video

Wooo hoooo thanks for the great vid instructions. Just replaced my 04 Altima starter and fired right up. Car still had original 20 year old starter but was giving the clicky clicky occasionally when turning ignition key.

GREAT VIDEO ‼️ Just finished 02 Altima 👍👍

Thank you for this video. 1A auto is the end all for me on almost every repair I need on every car.

Gonna do this next weekend in my 05 Altima . I seen almost all of your Nissan Altima videos . Great work always explain things while doing it and giving a few tips .

Great video just did mines took about an hour . The bolt thats under the starter is at first hard to figure where it's at. But got it done. Again thanks for this great video . I've watch many of your videos . Now imma tackle my brakes and rotors .

This is the best instructional video for changing a Nissan X trail T30 Automatic trans starter Motor. Thanks heaps would give 10 thumbs up if I could :) Took me 1.5 days to sort out. Can Confirm the same tools work (17mm Bolts etc.). You just need to remove the whole Air filter Box and unfasten the wire from throttle Body and other hook ups. No need to get under Car. Same part works. Thanks so much for vid ended up gettin a new part in for $300AU (including $80 worth of tools (breaker bar etc.)). Pixked up new starter from Repco on the spot for $211. All up saves me $600 Au easy :) cheerz big Earz

Thanks so much for posting this video guys! It was very helpful and saved me money. You guys covered every step of the process.

Excellent and very reassuring manner ! Thanks for pointing out the different bolt sizes.

I have learn so much with this channel. You guys have helped me sooo much!! I do appreciated the time invested in this kind of videos!

Thank you so much, your video helped me change my starter motor by myself..... I’m pretty impressed right now!!

The video was very detailed and helpful. I changed the starter in 1.5 hours. The bottom bolt gave me a difficult time. I chose to remove the battery completely because it was in the way. But 1A Auto as always provides detailed instructions. Car is back on the road and saved 150.00. Mechanic wanted 300. But i paid 149.99 at advance auto plus 12.00 core. Would have bought from 1A but it was a have to have now part. 😔. Thanks 1A

Thank you guys for the video. I am going to try and replace the starter on my 2005 Nissan Altima. Let’s see how it goes!! I am not much of a mechanic so I’m hoping everything comes out well and I don’t mess up my car. Lol

Mine just arrived in the mail today, about to reinstall it.

Just bought one and this is so helpful .. I appreciate it 💪🏾

Man! Thanks for THAT info! Saved my MAN status with the gf AND saved some bucks! Salute!

This video is a lifesaver. Couldn't have been shown better thanks guys.

Well I hope this video will help me, I need to put a starter on a '2018 Nissan Altima SV' in the next couple days, searched youtube but cant find anything close except this one my grandpa & uncle took it off

clean cable end with wire brush or sand paper before install. great video

Does this method also work for the 3.5 v6 SE model? I can’t a video for it by you guys and I only use you guys

All good, only 1 small tiny suggestion, grab a tiny little piece of 120 grit sandpaper and sand the positive wire connection terminal at the starter side, it seemed very dirty and rusty so a little sandpaper would have left it shiny and ready for a nice flow.

Saved me a loooooooot of money with this video. Thank you, sir.

seems relatively easy to get to the starter on this car compared to others I've seen.

Excellent camera work , parts n tool's one needs, clear narrative.... Big Up's

Thanks for the video it really helped and you made the instructions easy to follow 👍

Do you know the bolts sizes? I have lost the bottom bolt for mine

Thanks my man, great video I just change mine thanks to you.

Great video i did it by myself!!! Thanks!!!

Thank you so much for your video.. Its so detailed ...

Very precise give exact sizes for tools

That table is awesome for holding the belly lmao. Great job !!!

Hey brother! Great video! Any chance you can tell me if this would work for other 4cyl Nissan engines of the same year (I have Nissan Xtrail a Canadian model with a similar looking engine bay. Ill do more research myself but if you KNOW that'd be great! Thanks!

About to do this in a couple days thank you

Thanks for your videos very helpful

Seems simple enough! Thank you so much!!

Do you Anti-Seize the bolts going into aluminum?

thanks for this video i havea nissan sentra 1998 hope it s about the same as your video.1 thing is the alumin don t tighten to much info this is great info i be doing the job jAN 2,2021

I would have taken a second to (sandpaper) clean the positive terminal - might save you a voltage drop issue down the road. Thanks for the helpful video.

4:20 how do I get my elbow to do that

Thank you so much

What did you do with the two hoses that run over that ? Like the two hoses run up into the fire wall

On a Nissan Maxima 2004 Is It the same way or it's better doing it from under the engine?

How did you get the electrical connector out so easily like I dont feel a back tab on mine please respond asap I'm working on it rn...

Great Video! Would this process work for a 2002 Sentra Ser Spec V with the 2.5L?

1A Auto: **Completes repair in 30 mins** ME: This looks super easy! I'll give it a go! 100 hours later ME -- FML, finally got it done!!

You guys are lucky, the older models are more of a pain to remove because the starter sits directly underneath the intake manifold. It can only be remove from underneath the car.

Is there a procedure difference between the automatic and manual? I know the starter itself is different.

Awesome video!

Nice vid bro

I just bought a new starter 2 weeks ago and I went out to my car and when I turn the key to start the engine my dashboard lights up but I here a whinning sound and the engine will not crank. What could be the problem??

Is this the same with the 3.5L engine version??

I love 1A Auto😍

Great job letting us know we need to push the connector in at the bottom...thanks

what kind of gloves are those?

How much will it cost if I do it in garage?

Is it the same as for 2007 Nissan maxima

Seeing all that corrosion on the starter is a dead giveaway that the inside of that starter is probably just as corroded

My car wont start, not even a click from the relays, battery is full charge. How do i know for sure its the starter that is dead?

Would a 2008 Nissan Altima be similar

Thank you thank you thank you

Is it the same process for a 2008 altima

Will this work for a 2001 nissan altima?

Hi its it's same proses to renplace starters on nissan sentra gxe thank u..

How many bolts to u remove?

Will this work for a 2017 Altima?

Looks very cramped up , is there an easier way to do it?

Hello is any way out

nisan sony how to remove starter model 2013

What kind of starter is that

You forgot to test if the car would start

nisan sony how removed

There is no way that was that easy

Those radiator brackets are rusted to poop

Why would anyone thumbs down this? This took me just about 45 mins and I am not the handiest..... thanks guys

Where is starter on nizzan quest

Hello is any way out