Good video. Thanks for your determination. That bottom bolt is what's making me want to take it to the shop. But I see it can be done with the right wrench. Thanks for the inspiration.
@@abreubrian819 I removed starter, bench tested, its good. Now l tear down power head and ready for a total rebuild with new and good used parts. (I ran it briefly before tear down)
I think i would have taken the plastic belt cover off drilled a hole in rear panel as to fit a socket from my 1/4 in drive socket to get the right 10mm bolt out .then put a plastic body fender plug in the hole i drilled . easier than cutting bolt i think for replacement . you got it done and thats what counts . good job !
If the starter button doesn't work to start it but it lights up at the starter switch but doesn't start the starter so far I've been jumping solenoid and tapping on the starter for it to work the quad I do have is not a sportsman but it's a magnum 500 everybody says Sportsman and Magnums are the same but anyway my main question is where does it truly ground out at from the starter I know the starter needs to be ground but doesn't need to be ground to the battery or the frame?