Polaris Sportsman starter bendix replacement 

Awesome video man. My pull start all of a sudden seized on me, opened it up and the pull start assembly broke, in the meantime, I looked at the bendix and realized that the teeth were completely worn down! Sounded a lot like 0:20. Thanks again.

Excellent video, straight to the point. Thank you!

Good job chief😊

Put a new starter in mine and still doesn’t start; must be the bendix .. your video was very helpful... thanks for sharing...

thanks for the vid, the flywheel in 700, you have too taken off for sure if you want take apart the bendix.

Thanks man great video gotta do mine 👍

Thanks bro. Regards from Lapland

THANKS FOR THE INFO !

I can't say for sure on a 700...500's do not need to be taken off.

My starter is bad. I’ve got the replacement and a new bendix I got with it. It looks like the starter comes out the other side. Would it be easier to install the starter from the other side with that cover and bendix our or does it need to be in place in order to put the new starter in? Just trying to save myself some work as other videos show the starter being a bit of a pain to get the bolts started and stuff

Thanks for this video!!!

i put a new bendix on mine and you still cant start it as soon as it fires starter revs up old and new drives do the same thing any idea's

Would have been nice if you showed us it started good after all of that.

Por favor, você sabe me informar os números de engrenagens do bendix do polaris sportman 500??

Ok thanks I posted vids of the noise mine made Bushings will be changed later and see if it's better Check out my three vids and tell me if same or worse Thanks

does the flywheel need to come off on a polaris 700 sportsman to remove the bendex?

Hi was wondering i just checked mine as it's making a lot of noise , new one ordered do you put any agl or oil in the case to lube the gears?

Me puede mandar el diagrama de todo lo que va en esa parte donde esta desarmando

You got a part number on the bushins you replaced?

Hey man can u help me I have a new stater and bendix but the bandix is just spinning won't engage can u help me

canthat bad bendix cause the pull start from not retracting ?

Probably not a 5/16, more like 8mm...

Isn’t this similar to a trailboss 330?

Have any one removed the bushings for the bendix and if so how did you achieve that to install new ones