How to replace the head gasket on a jeep wrangler 4.0 90-2005 (part 1)

Подписаться 12 тыс.

Просмотров 22 тыс.

50% 1

I'm going to show you how to tear down your 4.0 in order to replace the head gasket.
• How to replace the hea...
i am not liable for anything that happens or occurs while you are working on your vehicle, this video is only for a educational tool, and you may need more information to properly do the work. I am not liable for any injuries or death due to your work on your done at your own risk

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@offrodnolefmr7445 3 года назад

Cannot believe you went through that and didn’t show us the gasket and the failure point. Good vid though. Thanks.

@davidshettlesworth1442 2 года назад

Thank you for this excellent video. I liked the tips on staying organized on the parts coming off the engine. Heading for the part 2.

@fixergood 2 года назад

thanks for watching i really apreciate it

@Chris12317 3 года назад

Great video! I followed both parts and was able to do it in my driveway. Keep it up

@fixergood 3 года назад

Thanks for watch glade I was able to help you out. Besure yo like and subscribe for more tips and tricks.

@tjjeeper7318 3 года назад

I just changed the intake manifold and gasket. I've watched every video I could find on RU-vid about it. I have a 2000 TJ 4.0 and no one shows what a pain it is to get the 14mm bolt off under number 3 injector. I bet I spent 7 hrs total getting that one off and on. I've done all the work myself on this Jeep since I've owned it and will never do that again. I will pay someone to do it next time. Other than leaving the hardest part out, great video.

@fixergood 3 года назад

Thanks for watchin really appreciate it I'm glad it helped you out should of made it a little more detailed ,I'll improve on the next one. Thanks for watching besure to like and subscribe for more tips and tricks and check out facebook and give it a like for more help in the future

@MrJakovasaur 15 дней назад

I’m doing this now is there a trick to make that lower bolt easier? It is an absolute b!tch

@elusivelines1 5 месяцев назад

Hey i cant find part 2 could you send a link... excellent video

@muca1971 4 года назад

very complete video ... what brand of gasket do you recommend and if it is advisable to change the bolts of the heads and thank you..

@fixergood 4 года назад

The gaskets that I usually use are felpro there good quality, with every head gasket job I always change the head bolts. Because most bolts anymore are torque to yeild and they dont work after one use they have a specific clamping force Thanks for watchin like and subscribe for more tips ad tricks

@muca1971 4 года назад

@@fixergood thanks very much 👍

@squatchfromearth4076 10 месяцев назад

Starting to think head gasket issues on the 4.0 is very common cause I've seen tons of these videos

@Masterabon 4 года назад

super helpful!

@fixergood 4 года назад

Thanks for watching besure to like and subscribe for more tips and tricks and check out facebook for more help in the future

@ChickenNoodle0404 4 года назад

Stupid question; sorry in advance. But what tools did you use to get lower bolts for intake and exhaust manifold out? I can't seem to reach them with my tools. Also I have a 2000 Grand Cherokee with very similar set up.

@fixergood 4 года назад

On the exhaust flang bolts the flag nuts break. I was able to get new hardware from the dealer and and had to just cut those off.thanks for watchin besure to like and subscribe for more tips and tricks

@mattdreer7381 4 года назад

I'm in the process of doing this right now. I need to remove the ac lines. Do I need to discharge them before removing them?

@fixergood 4 года назад

Yes ac work is dangerous, you need to have the system evacuated by a professional and the recharged by one also. Thanks for watchin

@mattdreer7381 4 года назад

Awesome. Thanks for replying so quickly. Absolutely! Thanks for the video

@MattieD87 4 года назад

Hey man, were there any bolts underneath the intake? i got the top bolts off. i cant really see underneath.

@fixergood 4 года назад

@@MattieD87 the inatk3 and exhaust are mated togather so you have to take the exhaust off to get the I take off and vise versa. Thanks for watchin and besure to like and subscribe

@Katarinarabbit 4 года назад

Why dose the radiator look like it’s having a still birth.

@fixergood 4 года назад

Hahahaha that pretty funny the Custer tries 4 diffrent stop leaks If I remember right Thanks for watching besure to like and subscribe for more tips and tricks and check out facebook for more help in the future

@Katarinarabbit 4 года назад

Almost like the costumer didn't know I'd be cheaper to spend the 100 bucks on a shop changing the head gasket😂