BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈 📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱 ⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
My 2014 C4 has a 36mm nut on the hub bearing. not 32mm mentioned I didn't have a special piston retraction tool but found that a "2-pin spanner" from a disc grinder disc retaining nut fitted the 2 notches in the piston. Rotating it clockwise retracts the piston
I hope everybody is doing research better than in this video. 1) You have the jackstands in the wrong place. This way you will damage the support. You can already see the front of the support damages, probabably because of use like this. 2) You should NEVER EVER let the caliper hang on brake line. You have to support it so there is no tension on the brake lines. 3) You should never get a grease on the braking material. That's a big NONO. It's scary how you can promote this as a tutorial.