HOW TO REPLACE THE TRANSMISSION COOLER FILTER OF A 2015 LANCER 

Thank you so much for your beautiful comment! Have a wonderful day ahead and God bless!

Thank you so much for watching and have a wonderful day ahead.

Good to hear that everything went well. Thank you for watching the video. Have a wonderful day ahead.

I don't have any knowledge on the outlander cooler filter but here is a link that might help you with what you need... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ph926qQmLOg.htmlsi=EjZ1t_EkorB3Rvyn The dealer is the best way to get the parts. Thank you for watching and have a wonderful day ahead.

Thank you so much for watching and good luck on your project.

That's correct, because even if the transmission fluid is change regularly the dirty filter will restrict the flow of fluid. Thank you for watching and have a wonderful day ahead.

Thank you for watching and have fun doing your next project. Have a wonderful day ahead.

Thank you so much for watching and if your vehicle is an Outlader, I encourage you to check out this link ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ph926qQmLOg.html It might be helpful. Thanks again and have a wonderful day ahead!

That's a very good idea, so you won't loose anything when you remove the battery connection. Thank you for watching and have a good day ahead!

Thank you so much for an awesome comment. Really makes the day brighter. Have a wonderful day ahead.

Thank you for your time watching. Have a good one my friend.

You're welcome and thank you for watching. Have a wonderful weekend!

Finally did it... thanks for the support and always stay safe!

I had an experience with the seal of my engine oil filter and it was a mess when I start the engine. Have a wonderful day ahead and thank you for watching!

Thank you for watching my friend!

Thank you for watching and enjoy the project!

Thanks for spending time watching. Keep safe always and God bless!

Thank you so much for watching!

Thank you for watching AK NAYAB. Keep safe always and enjoy your day!

Hello there... thanks for spending time watching and always keep safe and healthy. God bless!

Maraming salamat AK NAYAB for watching! Rest assured I will post more videos. God bless!

Thank you for watching. Keep safe always and God bless!

Maraming salamat sa pag suporta AK NAYAB! Keep safe always and God bless!

Maraming salamat sa walang sawang suporta AK NAYAB! God bless

Maraming salamat ulit ng marami AK NAYAB! God bless!

Thanks for your support and always keep safe. God bless

Thanks for watching my friend!

Paminsan minsan AK NAYAB! Salamat ulit sa pagbisita. God bless!

Konti lang hehe. Maraming salamat AK NAYAB. God bless!

Salamat din sa pagbisita AK NAYAB! Keep safe always and God bless!

Thank you for watching AK NAYAB. I'll try to do it next time. Keep safe and have a wonderful day ahead!

You've got it right! Thank you for watching.

I hope this video helps you with what your looking for... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ph926qQmLOg.html Thanks for watching and have a wonderful day ahead.

@@lologroovydiy thank you very much for the other video you sent on the paper filter.

I learn new things everyday but unfortunately some are from my mistakes Hehe! Thank you for spending time watching and have a wonderful day ahead.

I'm not familiar with the outlander, but if your transmission cooler filter housing location is same as in my video... you can change it. Because the position of the filter is higher than the transmission. The only fluid that will leak is the one in the filter housing. Estimate the fluid that will come out and put the same amount back will be much better. Just to verify, I have a link for a 2016 outlander and please compare the location of the filter housing with your car. If this is not the location then it should be under the battery same with the Lancer. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ph926qQmLOg.htmlsi=-x46ZLTbcMOHRFt2 I hope this will help. Good luck on your project. Thank you for watching and have a wonderful weekend.

Try checking the area where the inner right axle is connected to the transmission. If the area is wet with fluid, the rubber seal might be weak or damage. Good luck and thank you for watching.

Thank you lolo!

If your fluid is still good you can change the cooler filter without draining the fluid. There's a little amount of fluid in the housing which will spill out. If possible , estimate the amount of fluid and put the same amount of fluid back. I hope this will help. Thank you for watching!

Its a 3/8 universal socket adapter from Craftsman to remove the plate that holds the battery. Thank you for watching and have a wonderful day ahead.

The positon of the filter is higher than the transmission, so you will only lose the fluid that is in the filter housing. Yes you can do it; just calculate the amount of fluid that will drain from the housing and put the same amount back. Good luck and thank you for watching.

Should be the same. Thank you for watching.

I don't have the part number anymore. It was purchased from the Mitsubishi dealer and I just gave them the VIN#. Thank you for watching the video. Have a wonderful day ahead.

You can change the cooler filter without draining the fluid. There's a little amount of fluid in the housing which will spill out. If possible , estimate the amount of fluid and put the same amount of fluid back. After market filter is ok, as long as all the specs are the same. I hope this will help. Thank you for watching!

@lologroovydiy please share the link to buy the filter; thank you!

Part No.: 2824A006 is for the cloth filter in the cooler. Part No.: 2920A096 is for the rubber O-ring for the housing cover. Good luck on the project. Thank you for watching and have a wonderful day ahead.

As long as the fluid level is correct and you don't have a leak... it should be fine! Drive it for a while then check the fluid level and check for leaks again, just to make sure. Thank you for watching.

@@lologroovydiy my car is cvt, at what miles Ineed to change the filter?

@@rosarioexecutivewhen you change the cvt fluid, you can also change the cvt cooler filter. Check your owners manual but for me I do it around 50 thousand miles.

Do you by any chance know the torque of those 4bolts?

I couldn't find any torque specs for the cover too... I only hand tightened the bolts! Thank you for watching and keep safe always!

35 inch pounds

I change the filter same time with the transmission fluid. The ideal interval is every 50,000 miles. Thank you for watching and have a good day ahead!

If the transmission fluid is contaminated with engine oil, its better to replace the fluid together with the filter. The transmission might slip because of the engine oil.

The filter can be change the same time while draining the oil. Thank you for watching and enjoy the day!

There's a lot of reasons for a car to have an irregular idling. If I were you, I'll have a good mechanic check it out. If your car is equipped with transmission cooler filter, might as well change the filter. It is cheaper than breaking the transmission. Thank you for watching and have a wonderful weekend.

Maraming salamat sa suporta AK NAYAB. Palagay ko mayroon ding transmission cooler filter yang Lancer EX mo. Hindi lang ako masyadong pamilyar sa ganyang modelo. Subukan kong mag research at pag may nakita akong information Message kita. Maraming salamat ulit at God bless!

Most CVT cars recommend to change the fluid at 60,000 miles. Sorry I can't make a comment or suggestion... cause I don't know the driving history of the car. CTV transmission is very tricky... somtimes problem will show up when you change the fluid! Better to have a good mechanic take a look before you decide. Thank you for watching and have a good one.

If the filter is dirty, it will restrict the circulation of fluid and might cause a problem. Thank you for watching and have a wonderful day ahead.

Use a 1/4 inch drive socket wrench with extension. A bit tricky though. Thank you for watching and have a good day ahead.

I didn't drain the fluid when I replace the filter in that video. Make sure to place paper towel or clean rug under the housing cause there's some fluid sitting in the cooler housing. Good luck and keep safe! Thank you for watching.

I have no knowledge of the Outlander cooler filter change. Here is the link of a video that might help ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ph926qQmLOg.html . Thank you for watching and good luck on your project!

@@lologroovydiy thanks

If your transmission fluid is still good... you can change the top filter without draining the fluid! Estimate the fluid that will drip out of the housing and replace the same amount back. Thank for watching and have a good day.

@@lologroovydiy thanks 🙏

If your car is equipped with a transmission cooler filter, you can try and replace it. I hope the problem goes away with changing the filter. If the problem still persists the best thing to do is have it check by an expert. Thank you for watching and hope the problem will be solve.

Are you sure the mechanic poured the correct CVTF NS3/J4 fluid ❓🤫

You have very sharp eyes. Check your owners manual it should say how many km before you change the fluid. I change mine at 60,000 miles. Thanks for watching and keep safe always.

I purchased the parts from the Mitsubishi dealer. Thanks for watching!

Yes, you can change it. Because the position of the filter is higher than the transmission. The only fluid that will leak is the one in the filter housing. Estimate the fluid that will come out and put the same amount back will be much better. Good luck on your project. Thank you for watching and have a good day ahead.

I change my CVT fluid and filter at 60,000 miles. My plan is to change it again after 35,000 miles. Thanks for watching!

I'm not familiar with the Outlander engine and very sorry I can't answer the question. Thank you for watching!

Yes is the same I just did it

Try ordering it from a dealer... they should have the parts for your car! Thank you for watching and good luck.

I haven't work with an Outlander and not familiar with the transmission filter location. Here's a video that might help you with what you need. Thank you and have a good day ahead. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ph926qQmLOg.html

@@lologroovydiy Thanks a million!!!!

Thanks and God bless!

I bougth the transmission cooler filter at the dealer. If you have Mitsubishi dealer near you, it's more reliable and you'll get the exact parts for your car. Thank you for watching and have a good day ahead.

Maraming salamat sa suporta AK NAYAB! Hindi ko pa napalitan yung fuel filter ko, kaya wala pang video. Naka schedule to next year bago mag summer at malamig na dito mahirap gumawa. Yung fuel filter ng kotse ko doon sa loob ng gas tank. Pump at filter assembly. Keep safe always AK NAYAB at God bless!

I didn't remove the rubber tube because it might leak. You can try... just make sure that there's no leak! Thanks for watching and good luck on your project

@@lologroovydiyhow did you reach that bottom corner screw? I am having trouble reaching it?

I use a universal joint socket adopter to remove the volts. Thanks again and good luck on your project.

Try this part number: 2920A096 but check it out first before buying or better if you can go directly to the dealer. Thank you for watching. Have a good day ahead.

Thank you for your support my friend.

Thank you for watching my video! I just replaced the transmission fluid and the bottom filter. The size is 3/8 for the extension. Thanks again and good luck on your project AK NAYAB! God bless!

Check your engine oil dip stick and the oil filler cap, if the oil is cloudy or mix with anti freeze it might be a blown head gasket. I'm not sure why your anti freeze is contaminated. Better take it to a certified mechanic to have if properly check before it gets worst. Good luck and hope it'll be fix. Thank you for watching.

I'm not familiar and have not come across with the model of your vehicle. I'll look for information regarding the filter for your vehicle. My lancer have a screen filter inside the transmission pan. Thank you for watching and good luck.

@@lologroovydiy your lancer is CVT?

@@ivicatasik7923 yes its CVT.

I have no idea what would happen... maybe if you have a dirty filter it would change the reading but if your filter is clean with or without filter it should be the same! Keep safe always and Thank you for watching.

I'm not sure. I only used the Mitsubishi filter brand. Thank you and good luck on your project.

It is the same part. (Jatco CVT) It can replacement

Thank you for watching my video. Regarding the high sound you're experiencing with your car... I feel that for now I don't have an answer. There's lots of places that the noise can come from and the best way is to have a certified mechanic to assess the problem. Good luck and I hope the problem would bee fix!

It's an automatic CVT transmission. Thank you for visiting my channel and have a wonderful day ahead!

I'm not familiar with Nissan. But there's this video that I watch that might give you a good explanation. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-j60a8pZjc-s.html Thank you for watching and good luck.

@@lologroovydiy I've found that my 2013 Nissan Juke AWD hides its filter in the same place as yours! Although not exact, it's VERY similar with the only difference being the routing of the pipes. Other Nissan CVTs have the filter located in different places. Those are also on RU-vid, but this is the only video even remotely close to mine!

@@johnhouchins3156 good to know that!

I got the filter from the dealer. Thanks for watching!

@@lologroovydiy how much

Nag search ako ng parts pero ang hinahanap nila yung VIN number ng sasakyan. Kung wala yung VIN# hindi nila alam kung paano ang gagawin! Sorry at di ko masagot ang iyong tanong pero mag try pa din ako. Keep safe always!

Yes, you can change the cooler filter. Just make sure to place a plastic sheet at the bottom of the filter housing to catch the small amount of fluid that will drip. If possible measure the fluid that comes out and put back the same amount. Thanks for watching and stay connected.

Sa Mitsubishi dealer ako bumili. Salamat sa pagbisita AK NAYAB. God bless!

Salamat po lolo. Try ko po magpa order sa casa. Kasi laging 2 to 3 weeks ang dating ng piyesa pi

I already change my filter twice and also purchased the filter from a Mitsubishi dealer. Good luck and hopefully they sell you the filter.

@@lologroovydiy my car warning came on and said "slow down" I think the transmission was getting too hot.

Maybe the fluid circulation is bad because of a dirty filter.

@@munoz_rottweilers3238 Yes, several mechanics have stated that when this filter gets clogged, it can cause overheating of the transmission. Ideally we want to do the maintenance ahead of time to prevent this. This is why I'm now on a 30,000 mile schedule to change the fluid and both filters. This one and the one in the pan underneath

@@fitcwebb they never recommended I change the filter and I take it to the dealer for service all the time. I finally got it changed tho after requesting it

I replaced my filter every 50,000 miles. If I have the time maybe I'll replace it even at 30,000 miles. Thank you and have a good day ahead.

It's was so misleading I had a sh*tty time taking the forth one out

I think that this is a different Mitsubishi model. As far as I know there's two filter. One is shown on my video and the other filter is located inside the transmission fluid pan. Thank you for watching and have a good day ahead.

Use a 1/4 inch drive socket wrench with extension. A bit tricky though. Thank you for watching and have a good day ahead.

I think it’s easier.

@truwarrior22 nope I couldn't find it

@@Bighotwheelhunter My bad was thinking the Outlander, it’s no longer a cooler, just a cover.

@@truwarrior22 so I don't have to worry about it

@@Bighotwheelhunter I have over 100K on mine, no issues. Looks like 2016 Lancer has one, 2824A006

You're welcome and thank you for watching too. Have a wonderful day ahead.

Use the same socket to remove the 3 bolts only with extension. A bit tricky though. Thank you for watching and have a good day ahead.

@@lologroovydiy took me 3 hours