How to Replace Triggers | GBA SP

Подписаться 1,8 тыс.

Просмотров 14 тыс.

50% 1

How to Replace Triggers | GBA SP
Total Fix
How to Replace Triggers - I previously bought a few broken handhelds from eBay and in this video, I go through the process and show the steps I take on how to troubleshoot a defective Gameboy Advance SP system experiencing issues with the right bumper. If you are interested, please feel free to subscribe as I release weekly content.
Replacement Bumpers:
amzn.to/3TIZGFO
Tools Used:
Rust Remover (Affiliate Link): amzn.to/3AKpzwA
Brushes (Affiliate Link): amzn.to/3KOijEj
iFixit Toolkit (Affiliate Link): amzn.to/3KOiuiX
Electronics Air Duster (Affiliate Link): amzn.to/3CVCrCw
Canned Electronics Air Duster (Affiliate Link): amzn.to/3B8TnEq
Multimeter - Cheaper Option (Affiliate Link): amzn.to/3Ri07pd
Multimeter - In Newer Videos (Affiliate Link): amzn.to/3elpnfI
Multimeter Leads (Affiliate Link): amzn.to/3AKq0He
HARDK Hook and Pick Set (Affiliate Link): amzn.to/3KLMsEb
Soldering Equipment:
Soldering Mat - Older Videos (Affiliate Link): amzn.to/3BcMOkk
Soldering Mat - Newer Videos (Affiliate Link): amzn.to/3wTtTbw
99% IPA (Affiliate Link): amzn.to/3CWrqAQ
Hakko FX888D Soldering Station (Affiliate Link): amzn.to/3QfqISt
Hakko Desoldering Tool (Affiliate Link): amzn.to/3AQA6X7
Solder Tip Cleaner (Affiliate Link): amzn.to/3RCBdAr
Fume Extractor (Affiliate Link): amzn.to/3Riu744
Solder Roll (Affiliate Link): amzn.to/3TJb0C7
Flux (Affiliate Link): amzn.to/3emEiWU
Hot Air Station Equipment:
Quick 861DW 1000W Digital Rework Station with LCD Display: amzn.to/3DYRnP8
AFFILIATE DISCLOSURE:
This video and description contains affiliate links. If you click on one of the product links, I’ll receive a small commission. I won't put anything here that I haven't verified and/or personally used myself.
Warning:
This channel is not liability for anyone attempting to perform self-repairs. This channel is meant for the purpose of guiding and assisting those that may be experiencing technical difficulties with their systems. All equipment and products are handled with safety first in mind. Anyone who is inexperienced handling certain equipment or chemicals should refer to the user manual for their respective product and ensure that all proper safety measurements are performed.
Thanks for Watching and please don't forget to LIKE THIS VIDEO, SHARE AND SUBSCRIBE FOR MORE!
#stepstotroubleshoot #troubleshootgbasp #gbasp #triggers #brokentriggers

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@jongonzalez8519 11 месяцев назад

IVE BEEN WATING FOR A GOOD TUTORIAL LIKE THIS FOR YEARS, THANK YOU!

@totalfix877 11 месяцев назад

You're very welcome!

@isaackeller90 9 месяцев назад

Thanks, I got a unit at a great price tonight. Watching videos about the repairs boosted my confidence, especially since the issue seems common. Appreciate your insights on fixing it!

@MikeDaaBeast 2 года назад

Happy to see some GBA SP videos!! Great work

@Dj_Exo1 2 года назад

When this happens to me I just learn to live with it

@totalfix877 2 года назад

😂

@YappingIsMyGame 8 месяцев назад

I gave my friend my gpa and he started mashing the right shoulder button for no reason while playing Minish Cap. great video and I will never let him use anything again

@totalfix877 7 месяцев назад

Hahaha....to be fair, the button is so delicate. Hopefully you got it working again!

@frozerinosrepairs 2 года назад

Great video as always . Keep the good work

@totalfix877 2 года назад

Thank you! I appreciate the kind words!

@tommyc4889 Год назад

dude i'm in the process of desoldering the triggers, and boy are some of them stubborn, makes me really consider purchasing that hakko desolder kit haha

@totalfix877 Год назад

Haha, yeah I completely understand where you’re coming from. For that exact reason is why I picked up a desoldering gun. Hope you can get your issue resolved!

@Mark-lf8ze Год назад

Hey just went through this, couldn't get the trigger out to save my life. In frustration I just ended up using some flush cutters to completely cut off the entire trigger at the base, then I used wick and a solder sucker to remove what was leftover. New trigger works flawlessly!

@totalfix877 Год назад

@@Mark-lf8ze That’s awesome! I’m glad you were able to get it working again. The SP is def one of my favorite systems.

@tommyc4889 Год назад

@@Mark-lf8ze that’s pretty much what I did too haha

@SoundToxin Год назад

A trick I've recently found works on both the AGB and AGS is to just put huge blobs of leaded solder across all the pins you can and then run the iron back and forth while pulling on the other side with tweezers. You should be able to keep 2 pins or half of the switch solder molten/loose at a time this way and slowly wiggle it out, then just clean up the holes a bit and slot in the new button. Comes out in seconds this way. I even have hot air and a desoldering gun but they just don't work as well for removing the part. The desoldering gun make the clean-up afterward way easier than using solder wick, though.

@DjXilma Год назад

Screw poke thru the shell by the select button.

@totalfix877 Год назад

I know!!! Don't worry, I purchased a new shell since I wouldn't resell them that way. That's what I get for trying to hurry and not looking carefully at my screws 😢

@rogerbenjamin3396 Год назад

Great video! This helped me so much! keep it up!

@ModlineCorp Год назад

Great video ! 😊

@totalfix877 Год назад

Thank you!

@Bringmejoycon Год назад

What kind of tip was that you first used go remove the solder?

@totalfix877 Год назад

I was using a desoldering gun. It's like a mini solder vacuum! 😅

@sonicclang 8 месяцев назад

Hey, the buttons you linked to aren't correct for the GBA SP. I bought them, as well as the ifixit tool set. I have extensive experience soldering, unsoldering, working with electronics, etc. I can tell you right now the buttons were not what you showed in your video. The pins for the circuit and the ones that just hold the body to the circuit board were reverse. Since I had already spent a while unsoldering the old (bad) buttons I did whatever I needed to make the new ones work. But I give them a year, maybe less, before they work their way free.

@willmurray1553 2 года назад

Someone forgot that the gameboy screws are self tapping. You can see the screw bulge on the inside of the sp.

@totalfix877 2 года назад

I actually grabbed one of the wrong screws during reassembly before the recording. I did put the correct one back, but the damage to the plastic was already done 😭

@deviantsid18 Год назад

You could probably fix that if you carefully apply heat but you should remove the electrical components, then your sodder gun can weld the crack

@terry85mar 8 месяцев назад

Mine is doing exactly this. The r button works but only if you press it very hard otherwise it only works half the time.

@starchazer272 9 месяцев назад

What's the liquid you use to clean after sucking the soldering dots, at min 4:05? Thank you!

@KAKUN_DESU 10 месяцев назад

this is the fifth video I'm watching about how to get the L and R buttons and the spring back in place because I have no idea how to do it. But literally every video on this skips this exact part

@FunnyGA1ex Год назад

Here’s an idea. Make handheld game consoles like this easy to replace and clean the buttons. I shouldn’t have to melt it off the circuit board. But what do I know. I’m just a fat gamer News flash Nintendo: Portable gaming devices are bound to get crud in them from the outside world. A world you clearly don’t comprehend

@JesusG-cm2jx 2 года назад

I need to do this to my gameboy, what kind of solder do you recommend using ?

@totalfix877 2 года назад

I really enjoy the Hakko Soldering station I use, there are 2 downsides that I can think of right away. The UX for changing temps is weird and the price is a bit high at about $100. You can prob find a decent iron on Amazon, but I definitely enjoy the Hakko station.

@JesusG-cm2jx 2 года назад

@@totalfix877 okay gotcha thanks for the recommendation!

@JesusG-cm2jx 2 года назад

@@totalfix877 I just got it done rn actually. My triggers are working fine now, but I did have to buy solder sucker to be able to desolder it.

@totalfix877 2 года назад

@@JesusG-cm2jx That’s awesome! Yeah def an awesome tool to have for other projects, trust me! 😃

@diegotszx6693 10 месяцев назад

Would I broke something if I put too much soldering and all links together?

@AlexGamer67 10 месяцев назад

The ones linked in here don't fit in the GBA AGS 101, they're upside down.

@brandonbeauchamp8755 2 месяца назад

Did you use flux?

@Spenerico 3 месяца назад

This GBA is more trouble than its worth

@totalfix877 3 месяца назад

😅

@generic3592 2 года назад

Are the buttons a noticeable different in feel?

@totalfix877 2 года назад

For the SP it doesn’t feel as noticeable as the GBA, GBC and DMG. However, you can still notice the difference. You can always keep the old membranes and buttons to maintain the same feel.

@UltraCon79 Год назад

What brand of Flux was that?

@totalfix877 11 месяцев назад

At the time I was using a chipquick flux which was not that great. It creates a lot of sticky residue. I've moved to AmTech Flux and it has been great so far. I would highly recommend!