Тёмный

How to Replace Vacuum Hub Actuator 2009-2014 Ford F-150 

1A Auto: Repair Tips & Secrets Only Mechanics Know
Подписаться 2,5 млн
Просмотров 41 тыс.
50% 1

Buy Now!
New Auto-Locking Hub Actuator from 1AAuto.com 1aau.to/ic/1AFW...
This video shows you how to install a new hub actuator in your 2009-2014 Ford F-150. If the 4 wheel drive system is not functioning properly, you might need to replace one of the hub actuators.
This process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150
🔧 List of tools used:
• Pry Bar 1aau.to/oWS/1AX...
• 10mm Socket 1aau.to/obhQ/1A...
• 13mm Socket 1aau.to/obCD/1A...
• 18mm Socket 1aau.to/oamt/1A...
• 21mm Socket 1aau.to/oamt/1A...
• 22mm Socket 1aau.to/opB/1AX...
• 8mm Socket 1aau.to/obhQ/1A...
• 1/2 Inch Impact Gun 1aau.to/ouQ/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obG7/1A...
• Torque Wrench 1aau.to/oaK7/1A...
• Anti-Seize Grease
• Bearing Grease
• Copper Anti-Seize
• Gloves 1aau.to/oajs/1A...
• Rust Penetrant
• Safety Glasses 1aau.to/oack/1A...
• Floor Jack 1aau.to/oaar/1A...
• Hammer 1aau.to/oWB/1AX...
• Jack Stands 1aau.to/oXD/1AX...
• Wheel Chocks
Subscribe: / @1aauto
For More Info visit us at 1aau.to/h/e85/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

 

5 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 20   
@1AAuto
@1AAuto Год назад
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto √ Do it Yourself √ Save Money
@capncrunch504
@capncrunch504 14 дней назад
Watching this video was very helpful. I followed everything step by step. Thanks
@husa4342
@husa4342 Месяц назад
Great job sir! For those changing their hub, most of these same steps apply there as well.
@JamesStrikwerda
@JamesStrikwerda 11 месяцев назад
Thank you, helpful to entry level mechanic like myself
@WheezyWillis
@WheezyWillis 3 месяца назад
Thank you 1a auto. Fixed both sides on my 2010 xlt 4.6l f150 saved bunch of $$$
@jasonlynch7633
@jasonlynch7633 23 дня назад
Thank you. Those were perfect instructions.
@grantdubridge7995
@grantdubridge7995 6 месяцев назад
Fordtech takes off the upper swingarm nut and separates it then does not take the brakes off.
@jasonlynch7633
@jasonlynch7633 20 дней назад
I keep reading 30 ft lbs on the axle nut and 185 on the calipers. Why do you recommend 20?
@gadgetmantwincities
@gadgetmantwincities 11 месяцев назад
What an excellent video!
@matthewcody2963
@matthewcody2963 6 дней назад
very good video
@georged1085
@georged1085 8 месяцев назад
Will I possibly need an alignment after changing these?
@alexstern7925
@alexstern7925 11 дней назад
What is the torque on the three 8 millimeters bolts holding the actuator?
@CarsonStassen
@CarsonStassen 6 месяцев назад
Anyone know why I have the intermittent grinding sound. I checked the actuators with a vacuum gauge, each holding pressure. Checked my lines, each pulling pressure. This was yesterday and then i put it back together and I didn’t have any grinding for the rest of the day. Today I drove to work, heard the grinding, checked pressure and everything was good again. Could it be my cv axle?
@DK-wx8bq
@DK-wx8bq 4 месяца назад
Excellent video.
@kennethdrury4993
@kennethdrury4993 10 месяцев назад
I set my torque wrench wrong and broke the spindle off completely and had to change the cv axle out
@RadTrav270
@RadTrav270 7 месяцев назад
Anyone info on why I’d be getting vacuum to one hub but low vacuum (5) to the other? After replacing everything?
@josemanuelvargas9305
@josemanuelvargas9305 4 месяца назад
ty
@hansmeizinger8840
@hansmeizinger8840 4 месяца назад
I hope a question I want to ask can be answered here, can I swap a complete 2016 front suspension in to my 2012 Ford F-150 4x4, all new parts very cheap to me. Thanks
@BrettJayne-nx9fc
@BrettJayne-nx9fc 10 месяцев назад
Very good video
@1AAuto
@1AAuto 10 месяцев назад
+@BrettJayne-nx9fc Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Далее
Women’s Celebrations + Men’s 😮‍💨
00:20
Тренд Котик по очереди
00:10
Просмотров 317 тыс.
Ford F150 Vacuum Hub and Wheel Bearing Replacement
14:33
How to Replace Lower Control Arms 2009-2014 Ford F-150
32:16
John Oliver Is Still Working Through the Rage
37:32
Просмотров 1,9 млн
How to Replace Upper Control Arms 2009-2014 Ford F-150
16:41
DIY How to test 4WD vacuum actuator
5:01
Просмотров 418 тыс.
F-150 Grinding noise - IWE Replacement
29:21
Просмотров 92 тыс.