No video :(

How to Replace Water Pump 01-11 Ford Ranger V6 4.0L

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,4 млн

Просмотров 255 тыс.

50% 1

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEW...
BUY THE PART:
CLICK "SHOW MORE" TO SEE INSTRUCTIONS BELOW:
1A Auto shows you how to repair, install, fix, change or replace a broken, bad, or leaking water pump. This video is applicable to the 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11 Ford Ranger
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oL4/1AX...
• Phillips Head Screwdriver 1aau.to/oL4/1AX...
• 10mm Wrench 1aau.to/ohF/1AX...
• 19mm Wrench 1aau.to/ohF/1AX...
• 10mm Socket 1aau.to/oAr/1AX...
• 7mm Socket 1aau.to/oAr/1AX...
• Adjustable Wrench
• Needle nose pliers 1aau.to/ofD/1AX...
• Needle nose pliers 1aau.to/ofD/1AX...
• Ratchet 1aau.to/oMQ/1AX...
• Socket Extensions 1aau.to/oEX/1AX...
• Torque Wrench 1aau.to/omC/1AX...
• Anti-Freeze
• Drain Pan 1aau.to/odo/1AX...
• Funnel 1aau.to/obe/1AX...
• Razor Blade / Gasket Scraper 1aau.to/oaG/1AX...
For More Info visit us at 1aau.to/h/apr/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Опубликовано:

26 сен 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 139

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@erichenry1426 3 года назад

1998 Ford ranger

@mountainmover777 Год назад

I am definitely not a mechanic, but I just finished replacing my water pump, thermostat, and temperature sensor. Also I was able to remove and cleaned my throttle body intake. I could not have done it without this channel. Friends for life!

@wyndmclark7235 3 года назад

I find it much easier if you prep the new pump first by taking a real thin skim coat of RTV putting it on the back of the water pump and then placing the gasket in place then what I do is I take the 8 mm bolts I put them all in place holding the gasket in place that way by time I get the old one off the gasket is sealed and dried to the water pump then I apply another coat of our TV and install the new water pump that way you're not fighting with the gasket and taking a chance of destroying it

@nofortunatesonII 4 месяца назад

FWIW: When doing this, I cut a piece of cardboard the size of the radiator core and slipped in next to the radiator to prevent and possible mishaps and possible radiator damage.

@larrywhitesell4139 10 месяцев назад

The big 36mm nut won't come loose even with huge tension on the belt. Any other ways to hold that pulley??

@tomkuhn 2 месяца назад

Thanks for this video. I’m getting ready to have the water pump replaced or do it myself I’m not sure which. One little trick you might show your viewers sometime when you’re installing something with a large gasket like the water pump, put a little grease on the water pump surface where the gasket is supposed to go and that grease will help hold the gasket in placewhile you’re installing the part. Thanks again for the great video guys. I appreciate it.

@1AAuto 2 месяца назад

+@tomkuhn Thanks for the feedback!

@MattyP406 7 лет назад

Great video! Very helpful. The only part I had problems with is removing the cooling fan. Had to go out and get the proper tools for this step, but other than that everything went great. Thanks again!

@1AAuto 7 лет назад

+Matt Pierre Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/engine-water-pump/i/1aewp00089?RU-vid&CTA+Comment&JW8Ie9QCA9o

@artarmendariz9555 2 года назад

I may be attempting this soon, you made it look easy especially knowing I do not have to remove Radiator Great Video.

@sethkrattiger2290 7 месяцев назад

Thank you for always helping me fix my ranger!

@joemartinez6182 4 года назад

Step by step and even your voice is good and clear, but the camera work was great after watching your video am now sure and not to weary of tackling the water pump on my 2004 Ranger, thank you very much for the video.................

@1AAuto 4 года назад

+joe martinez Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@jrblake2125 5 лет назад

Thanks for this video. I was encouraged to do this job myself but my fan was mis-threaded on by whomever replaced the pump before. It took me 4 hours to get it off, and 6 hours to do the whole job. So I was expecting to be done in 19 minutes. Hopefully not everyone has 4 misthreaded bolts.

@1AAuto 5 лет назад

+Jr Blake Thanks for checking us out. We are glad you got the job done and unfortunately sometimes people will work on their vehicles and not know how or what to do causing headaches for the next repair. 1aauto.com

@Joaquin77 2 года назад

I feel you Blake! Hehe I own a 2005 sport trac and doing many repairs on my own to learn a bit more about maintenance, and usually there is always something on the way that complicates the time lenght.. hehe

@ryanwalsh5305 Год назад

They edit a good bit. It's definitely not a 19min job.

@user-bp4bg9zh6k Год назад

I am trying to replace my water pump on my 2011 ford ranger. I did everything you said to do. I had to take the two bolts out and use a adjustable wrench. But the fan nut will not break loose.

@1AAuto Год назад

+William Head We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@raygraboski9212 6 лет назад

GREAT video! Excellent step by step (did not assume you knew anything which is correct) and GREAT narration!

@wettosixecho 6 лет назад

Video helped, thank you. Unfortunately my water pump gasket came halfway folded in the box. I had trouble lining up the holes and the pump inadvertently fell off while i was trying to thread the bolts in. I used rtv to tack the gasket flat onto the pump. When i went to fill up the system i noticed the pump poked a hole in the damn radiator when it fell. I have to pull the radiator tomorrow. ugh.

@tristen8089 6 лет назад

wettosixecho there's I trick for gaskets I came up with put a thin layer of grease and then stick the gasket to the pump then line the gasket up with the holes

@EvilJ069 2 года назад

Truck looks great ON TOP lol

@sheffieldlane5769 3 года назад

Super cool trick with the serpentine tension to get the fan off

@user-bp4bg9zh6k Год назад

I cannot get the fan clutch nut to brake loose even when I put more pressure on the belt.

@ianmoone4331 3 года назад

I was unsuccessful using the tensioner to hold the belt tight enough to remove the fan but. I took a giant flathead screwdriver and hammer and pounded the but on the left side edge, and after about 20 smacks, it bike loose.

@1AAuto 3 года назад

+Ian Moone Thanks for the feedback!

@ianmoone4331 3 года назад

I didn't realize how many misspellings were in my comment. I meant to say that I put the big screwdriver on the left side of the NUT and pounded it with a hammer until it BROKE loose. Your video was EXTREMELY helpful! Thanks!

@txsurfnturf 3 месяца назад

I rented the tools to remove the fan clutch. One is for the nut on the fan clutch. The other holds the water pump pully still so you can unscrew the fan nut. I rented them from 'autos own'. ( I don't want to violate any copyrights, but i think you can figure it out.) Anyway, you get your money back when you return the tools. The tool that holds the water pump pully looks silly, but if you figure out how to use it (it's not that hard), it works pretty well. You can even use it to remove the water pump pully bolts by holding the pully still with it and loosening each pully bolt one at a time. Sometimes the tensioner trick shown in the video doesn't work. It didn't for me. Save yourself the trouble; rent the fan clutch wrench and the pully holder tool.

@1AAuto 3 месяца назад

+@txsurfnturf Thanks for the feedback!

@manuelrivas9141 4 года назад

Thanks for sharing your knowledge, very similar if not the same on my 98 4.0 ranger. Do you recommend using a gasket sealant along with the water pump gasket? Thank you.

@jacobkatari9126 6 лет назад

Finally, a Vedio by 1A Auto trust's worth watching.

@firepup35 6 лет назад

One thing they neglect to tell u in this video is you will have to take of the bracket that the AC condenser and power steering pump to get 1 of the bolts out on the far right hand side...02 Ranger 3.0 (knowing this would have saved me alot of time and efforts)

@1AAuto 6 лет назад

+Stacy Alexander Thanks for watching and also the added tip! Have a great day! 1aauto.com

@greysonkountz5112 6 лет назад

Stacy Alexander to be fair, this is for a 4.0

@Justinestabrook 6 лет назад

So the 4.0 is easier?

@angelgjr1999 5 лет назад

@@Justinestabrook was it?

@DarrelllCampbelll Год назад

But this is a 4.0 its not the same

@devth125 5 лет назад

very informing! Excellent video!

@1AAuto 5 лет назад

+devth125 Thanks for checking us out!

@Leitch7 6 лет назад

Excellent step by step video. Thank you.

@1AAuto 6 лет назад

+Leitch7 You're welcome. Thanks for watching.

@orygunchainsawmassacre6761 7 лет назад

Verrry helpful and thorough video!

@michaeljohn8905 4 года назад

Can’t believe this only got a coupe hundred views.

@miguelfarias2041 6 лет назад

Great video very helpful and clearly explained step by step!

@1AAuto 6 лет назад

+miguel farias Thanks for checking us out. 1aauto.com

@josevicencio6081 2 года назад

Great video ,one question is not necessary to add sealer masker on the gasket water pump.thanks

@donaldfafard 7 лет назад

great vid. i like to use blue loctite on all bolts, nuts etc. do you see any problem with that for this R&R ?

@melindahall8753 4 года назад

I sure appreciate your videos. I don’t work on vehicles, but am trying to help my elderly father save some money. I was able to replace the thermostat from watching your video on Thermostat replacement, but I am still not getting heat in the truck. My brother says it is the water pump because there is no water in the hose. Should I replace the water pump next? Hope someone can help me in the next few hours if you have time to respond. Thanks so much!

@1AAuto 4 года назад

+Melinda Hall Thanks for watching! There could be multiple reasons why you're having this particular problem. If you are unsure of what the problem it we suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair. 1aauto.com

@Nikkk6969 2 года назад

You probably didn’t idle for 15 mins keeping coolant full in the radiator whilst leaving the heat on high which will push the hot coolant through the heater core bleeding it of any air that may have made it’s why in during repairing

@MistiMoan 10 месяцев назад

You said that the pump has the part for the fan clutch, but I'm going to an electric fan with a 180°f thermostat do I need to change anything?

@alexluna6106 5 лет назад

Do i use gasket sealer with the gasket or no some ppl told me to do that but idk ?

@577buttfan 3 года назад

I always did.

@benrodeheaver701 2 года назад

I bought a pump online and didn't open it for a month or so. ( wrong one) Now I can't send it back and need to know if it's possible to drill the top center + add a hose nipple to make it work on an explorer ?

@damygeebo 3 года назад

4:54 - So, facing the motor from the front, you still turn counter-clockwise to remove that large fan nut from the water pump housing, correct? You're loosening it to the left in the video.

@jimgearing260 3 года назад

It depends on the vehicle. Fan nuts are self tightening when running so I've found that whatever direction your fan needs to turn in order to work is the direction you unscrew the nut. At least that's what I've found

@mts7274 2 года назад

@@jimgearing260 Yeah, but why would the fan on any other 2004 Ranger V6 4.0 turn an opposite direction than what is being shown on the 2004 Ranger V6 4.0 being repaired in this video?

@kclayton326 11 месяцев назад

What about the Ford Ranger XLT 3.0 Liter? I'm constantly seeing video's for the 4.0 but never the 3.0. Is it the same? I have a 2002 Ranger 3.0L but I can never find any video's on that. It's always the 4.0.

@stevenfox3465 Год назад

Any videos of the Same, but for 3.0 engines ??

@robertobrien8725 2 года назад

89 lbs torque or 8-9 lbs torque?

@bunnymunny8170 Год назад

He says 8 or 9 inch pounds, i have no idea what an inch pound is....

@elduro247 6 лет назад

this videos really help me to do mine, thanks for the great videos you guys make.

@jonhill9564 2 года назад

Well done. Thank you!

@stevenpersinger6577 6 месяцев назад

Just did all this work and the new pump still leaks out. What did I do wrong. Gasket stayed on as I replaced it. It was not that difficult. Any ideas

@johndemby1387 2 года назад

Well done very accurate Thanks.

@kevincooperbuggy 7 лет назад

i put tension on the belt on water pump pully but i cant free up the nut connected to the fan i used kroil to loosen the bolt

@tentman4fun Месяц назад

Nice video but my fan does not have them to bolts you have to just loosen it up by itself fan comes off first then four boats

@spencerbox6705 7 лет назад

doing it right now, cant get the 36mm fan nut to come lose.

@rallyrats 6 лет назад

Spencer Box Same, how did you get yours off?

@kevinvandyke3837 6 лет назад

A good solid tap on the wrench handle with a small hammer hsould do it.

@randallruel7859 5 лет назад

I did it right now Had to tap hard on the fan nut to break it loose Don’t get too crazy tho I went back to to pull and the fan finally came loose. Everything worked it after that

@jrblake2125 5 лет назад

I had this very problem today doing mine. The fan was misthreaded on so it didn't want to come off.

@rickparker5437 6 лет назад

great video. im replacing my water pump for second time. it lasted 80,000. I always use a gasket sealer. surprised you put only the gasket. 12 bolts is a lot to try and seal.

@1AAuto 6 лет назад

+Rick Parker You should be fine just using a gasket made for the water pump. We carry the water pump shown in this video on our website. Here is a link to them. www.1aauto.com/engine-water-pump/i/1aewp00089?RU-vid&CTA+Comment&JW8Ie9QCA9o

@rickparker5437 6 лет назад

ok thank you for the info

@LuisM632 6 лет назад

1A Auto Parts what is the water pump pullies bolt torque and the 12 bolts on the water pump?

@Justinestabrook 6 лет назад

I saw 12lbs in another video.

@Nikkk6969 2 года назад

@@rickparker5437 is your water pump still lasting?

@whytdevl9843 2 года назад

You don’t use any gasket sealer, Permatex?

@yamiladdi 3 года назад

thank you! will this work for for ranger 1998 ?

@Joaquin77 2 года назад

Thanks for making this video, I am tempted to do this on my own and save some money on repairs, i own a 2005 sport trac and it needs some love.. If anything.. do you sell those plastic fans on 1A Auto website? Mine has a few cracks and maybe needs to be replaced soon.

@1AAuto 2 года назад

+djkubo Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@angelotillas9782 7 лет назад

SUPERB JOB!

@michaelmorris6575 7 лет назад

Fantastic video! Very well done!

@1AAuto 7 лет назад

+Michael Morris Thanks for checking out our videos! If any of our viewers need to make this repair, we carry the part shown in this video on our website. Here's a link to them. We also offer free shipping on all orders in the US. www.1aauto.com/engine-water-pump/i/1aewp00089?RU-vid&CTA%20Comment&ATony

@ronwisman1767 5 лет назад

great presentation, thank you. I will remember where to buy parts when I need them

@1AAuto 5 лет назад

+Ron Wisman Thank you for your feedback! We appreciate your business.

@mts7274 2 года назад

4:51 "Loosen the nut." ...you are loosening the nut counter clockwise [to the left], but I've read that the direction is supposed to be clockwise. I've also seen videos where the nut is being loosened clockwise [to the right]. Is that maybe because the older model Rangers were set up that way?

@Fsilone Год назад

Looking at the blades, the belt moves counterclockwise to move the air rearward. The resistance of the fan forces it clockwise relative to the belt, tightening it in the process.

@Fsilone Год назад

So holding the belt in place with resistance and moving the fan counterclockwise relative to it will loosen it.

@shanec4441 3 года назад

Looks like the fan nut is right hand thread. Most of those are left handed threads

@ryanrush9148 4 года назад

GREAT VIDEO!!!!!

@1AAuto 4 года назад

+Ryan Rush Thanks for checking us out! 1AAuto.com

@jloft2935 7 лет назад

not one of these dam videos show what a pain in the ass it is to get that little hose on top off then back on

@ufartface 4 года назад

i agree- come on- show us how you did it

@577buttfan 3 года назад

@@ufartface Sweat and blood man!!!

@davidarevaloantonio8346 6 лет назад

Very good video¡¡¡ excelent¡¡¡

@straitpepperdiet 6 лет назад

do you need to use new bolts?

@djrambo1554 4 года назад

Good job!!!

@1AAuto 4 года назад

+DJ Rambo Thank you for your feedback! We are very proud of our videos.

@Magnum5.9360 6 лет назад

Is this the same on 1997 Explorer 4.0 sohc?

@1AAuto 6 лет назад

+97 Explorer It may be a different procedure on your application. We currently do not have an auto repair video for this particular year, make and model. Thank you for asking. 1aauto.com

@rallyrats 6 лет назад

Clutch fan bolt just keeps spinning and spinning, won't loosen. What gives?

@boboynunez5907 6 лет назад

NM_Desert_Rats i have alot of trouble with that to but what i do is stick a flat head screwdriver in and stick it betweet 2 of the 4 small bolts and then a big enough wrench put it on the fan clutch bold and hold the screwdriver with one hand and the wrench with the other. Just becarefull when tighning because sometimes the screwdriver will slide out from underneight the bolts.

@gabriels181 2 года назад

For those of you that have this problem (like me), you’ve probably misunderstood the instructions and removed all 4 screws on the water pump pulley instead of just 2. If you do that, the pulley is no longer connected to the pump itself and the bolt will just spin freely instead of loosening. Put at least 2 of the screws back and try again, or just go to Autozone like I did and they’ll loan you the proper tools for free. Made it way easier.

@loos3cannon410 5 лет назад

I ran into problem after installing the new water pump now it’s over heating and shut off what think it can be?

@GeneralRELee 5 лет назад

LOOS3CANNON you probably either are leaking coolant somewhere, and or have an air lock in the system somewhere, hence coolant isn't flowing properly. If it's a airlock, you'll need to bleed out the air

@bradfaught1695 5 лет назад

I'm assuming you already checked the thermostat for proper operation

@gridironking97 7 лет назад

I am running into the same issue as many others. I can not seem to get the fan nut loose. Please help.

@Leitch7 6 лет назад

I was having trouble too but a big wrench and a quick hit with a hammer on the end of the wrench broke it loose.

@larrywhitesell4139 10 месяцев назад

@@Leitch7 many hits with 4 lb hammer and no luck

@dominickbono477 5 лет назад

good but he doesn't show taking the old pump off and accessing the bolts. that's the difficult part which was edited out

@TJintheVI 3 года назад

Jeez, it's less of a pain to change my WP on my 2006 bmw 330i

@sheffieldlane5769 3 года назад

You should see the thermostat replacement on these things. Took me like 6 hours lmao

@MiguelSoto-hh7qr Месяц назад

Totally skipped over the boot nudged behind the ac

@RubenAvila 2 года назад

What about an earlier ranger, say a 2000?

@user-bp4bg9zh6k Год назад

It is a good video but it doesn’t show how hard it really is to get the fan clutch nut broke loose. Maybe they need to make a video on how to get a stuck fan clutch nut to break loose.

@1AAuto Год назад

+William Head We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c

@brownpride7040 3 года назад

Would this work on a 98 ford ranger ?

@1AAuto 3 года назад

+Brown Pride This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-1AAuto-c

@577buttfan 3 года назад

squeaky squeaky idler pully

@chrismaragoudakis7149 6 лет назад

Is the process the same on a 03 ford explorer

@1AAuto 6 лет назад

+Chris Maragoudakis It should be the same procedure. Here is a link to them water pumps that we carry for an 03 Explorer and also an auto repair video. Hope this helps you out goo.gl/oAJFJE

@nicanorm1069 4 года назад

I need water pum un muy Explorer Sport XLT 2003

@1AAuto 4 года назад

+David M Thanks for checking us out! I have provided a link below to the video we offer for the 2002 to 2010 Ford Explorer Water Pump replacement video. Please let us know if you need any further assistance, thank you. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1HCgDvxgL0w.html

@benhajdu4040 3 года назад

PFFFFT. Way to skip the best part. Never ever ever ever ever does a fan just come free. Any tips to how you guys do em? I use an air hammer very carefully to jar the fan free.

@nathaningram3606 6 лет назад

1994 fordranger xl freezeplugs

@fauxPainting 4 года назад

No gasket shellack, glue really

@randallruel7859 4 года назад

I’m back cause I didn’t put the RTV high temp 🤣🤣🤣

@1AAuto 4 года назад

+Randall Ruel Thanks for checking us out! 1AAuto.com

@neilmcmanus3727 3 года назад

this video did not show in any sense, useful instructions how to remove the nut that connects the fan to the fan clutch, what if the nut will not budge, if it is so tight that the clutch slips when tightening the belt and applying the adjustable wrench. What then ? and what direction to turn the nut to loosen was not mentioned. The local autoZone will lend out a tool to grasp the clutch and a separate tool to turn the fan nut, they require a deposit, and the customer can keep the tool for 90 days. Perhaps your video could show the many different ways to loosen the fan nut.