How To Replace Water Pump 2006-2012 Toyota Rav4

Подписаться 481 тыс.

Просмотров 50 тыс.

50% 1

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ib/1AEWP00178
The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind. This video shows you how to install a TRQ water pump in your 2006-2012 Toyota RAV4.
• Check here for more videos on the 2006-12 Toyota RAV4: • Toyota RAV4 2006-12 3r...
This process should be similar on the following vehicles:
2006 Toyota Rav4
2007 Toyota Rav4
2008 Toyota Rav4
2009 Toyota Rav4
2010 Toyota Rav4
2011 Toyota Rav4
2012 Toyota Rav4
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oa/1AXAA00013
• Pry Bar 1aau.to/oa/1AXAA00020
• 10mm Wrench 1aau.to/oa/1AXAA00010
• 10mm Socket 1aau.to/oa/1AXAA00017
• 12mm Socket 1aau.to/oa/1AXAA00015
• 14mm Socket 1aau.to/oa/1AXAA00015
• 17mm Socket 1aau.to/oa/1AXAA00015
• 19mm Socket 1aau.to/oa/1AXAA00043
• 21mm Socket 1aau.to/oa/1AXAA00043
• Trim Tool Set 1aau.to/oa/1AXXX00006
• Pliers
• E5 Socket
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Swivel
• Torque Wrench 1aau.to/oa/1AXAA00044
• Block of Wood
• Marker / Writing Utensil
• Paper Towels 1aau.to/oa/1AXSS00035
• RTV
• Sandpaper
• Drain Pan 1aau.to/oa/1AXAA00320
• Floor Jack 1aau.to/oa/1AXAA00068
• Jack Stands 1aau.to/oa/1AXAA00065
• Sanding Block
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Toyota RAV4 2006-12 3rd Gen: • Toyota RAV4 2006-12 3r...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

7 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@BeingBretton 2 года назад

Good clear instruction. Maybe you could specify that this is a 2.4L engine in the description? Cheers.

@chicousa 8 месяцев назад

Awesome job! I bought a RAV4 that needed an engine swap and after seeing what you had to go through here, I am preemptively replacing the water pump, the tensioner, the thermostat and even the alternator! It's SO much easier with the engine out! Thank you!!

@davidlach2471 Год назад

This video is extremely well done. Love your attention to detail and all the tools and tips you offer to ensure a solid repair. (I wonder how many shops would be as thorough and thoughtful as you are). I wish you were down the road... I'd have my Rav4 to you by lunchtime !

@cdrice999 2 года назад

THANK YOU for this video. Been struggling with this service on my 2006 RAV4 this weekend, trying to follow the Haynes and Toyota service manuals. This video filled in a couple of critical omissions from those texts, and showed a couple of nice tricks, too - I wish I had watched this first! This will get me back on track.

@TRQ 2 года назад

+cdrice999 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@driojal Год назад

I thought that the silicone goes outside the groove part and the groove is there to catch excess silicone front when tightening the bolts of the water pump

@michaelmorris6575 Месяц назад

Great video! Thank you for sharing.

@captainsledge7554 8 месяцев назад

Oh ok its a 2.4l... thanks for that description

@themongeman 2 года назад

Good video however, You forgot about the 14mm nut that's on the underside of the the motor mount stud. Also, you didn't mention or show how to remove the crank sensor clip from the water pump or the harness mounting clip from the alternator. I purchased a Aisin water pump for my 07 RAV4 and the instructions specifically say not to put sealant in the groove, you go above the groove and behind all the bolt holes/stud holes. That groove is meant to catch any overflow of sealant. Instructions also state that sealant overflow past the groove could contaminate the coolant and cause issues.

@sctantrums Год назад

this seems like a very significant error.

@neilwebster2050 5 месяцев назад

One of the best tutorials I’ve watched great job 👍

@kelleesmith7236 Год назад

Very nice video. I’m impressed with your work!

@lifeisgood-victoria796 Год назад

Excellent video. Thank you.

@edzanjero353 Год назад

EXCELLENT in every respect. Professional.

@gregweber9361 2 года назад

This is a great video. I was able to do it without taking the motor mount loose - can still reach what you need to. Did not like the idea of supporting that much weight on the oil pan. Thank you for this big help! Came back to this many times during the job.

@flux101cdn 2 года назад

I'm a licensed auto tech ... if the pan isn't rotten it will be fine. I've supported 100's of engines by the pan while replacing motor mounts.

@davesmith6754 2 года назад

Good to know you don't have to remove the engine mount

@davesmith6754 2 года назад

Great vid ... Did U remember the 17mm bolt up under the engine mount 😁

@TheLlamaFarma Год назад

Looks like it was missing .... and I thought it's a 14mm

@christopherw6309 Год назад

Good work. This would make me hesitate to remove those studs though.

@laoladispedroza3311 Год назад

You are good I like your work 😊😊

@marcusdarnell3348 3 года назад

Great video! Can you remove the water pump from the bottom to avoid removing the alternator and engine mount?

@justinrampersaud1948 5 месяцев назад

This title is incorrect. The 2.4 engine only came on the 2006-2008 rav4 . The 2009-2018 came with the 2.5 . So it's a bit different from this.

@tommcelroy2276 6 месяцев назад

I have to say, I have always been hesitant to watch auto repair done by a female mechanic (I know, how dare I say that 😀) Like Brian from impractical jokers said, but I won’t go there. This video was well done. Straight to the point, video done well. Great Job!

@NovoGold 2 года назад

Noticed the alternator was replaced also..! 👍

@xMisterpamplesx 2 года назад

Wayyyyy to much rtv, shits gunna dry up , break off and travel through the coolant system only to get clogged in the thermostat, heater core, or radiator..... nice....

@videoworks7731 Год назад

thank you

@johnb1658 6 месяцев назад

Thanks

@infinitylove8071 2 года назад

I love this woman you are just so calm and good i enjoy your work and explanations👍👏👏👏

@johnb1658 6 месяцев назад

Terrible idea to remove those water pump studs! If they are seized and you break them you just made a huge problem! Terrible advice.

@SaidSaid-dt8wz Год назад

Very good video.thank you so much.

@user-jk8iy1du8g 3 года назад

cood job.

@TRQ 3 года назад

+علي رحيل Thanks for the feedback! 1aau.to/m/Shop-TRQ

@mikejacques2318 2 года назад

I disagree with the idea of channel locks on the studs. Never used my stud removers for a stud I reused either but other than that nice work

@puerco567 Год назад

HI, for how long I will be able to drive with a noisy water pump before it goes completely bad ?

@KingGio1 6 месяцев назад

What is the stud removal tool called?

@flunul 2 года назад

Thanks. Unfortunately video does not show how to get the cable mount on the lower part on the pump loose. I have a hard time pressing the mount together on the back side.

@sctantrums Год назад

same problem, i forced it out with screwdriver, hope it goes back

@stewartneis6960 Год назад

Hi, Watched your video was very impressed. HOWEVER your torque specs for the water pump bolts is significantly off! You noted them to be at 80 inch/pounds. When In fact they should be 180 inch pounds or 15 ft/pounds!