How to Replace Water Pump 2009-17 Chevy Traverse

Подписаться 486 тыс.

Просмотров 38 тыс.

50% 1

Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ib/1AEWP00164
The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind. This video shows you how to install a TRQ water pump in your 2009-2017 Chevy Traverse.
• Check here for more videos on the 2009-2017 Chevy Traverse • Chevy Traverse 2009-20...
This process should be similar on the following vehicles:
2009 Chevrolet Traverse
2010 Chevrolet Traverse
2011 Chevrolet Traverse
2012 Chevrolet Traverse
2013 Chevrolet Traverse
2014 Chevrolet Traverse
2015 Chevrolet Traverse
2016 Chevrolet Traverse
2017 Chevrolet Traverse
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• 10mm Wrench 1aau.to/oa/1AXAA00010
• 15mm Wrench 1aau.to/oa/1AXAA00010
• 10mm Socket 1aau.to/oa/1AXAA00017
• 13mm Socket 1aau.to/oa/1AXAA00015
• 18mm Socket 1aau.to/oa/1AXAA00043
• 22mm Socket 1aau.to/oa/1AXAA00266
• Serpentine Belt Tensioner Tool 1aau.to/oa/1AXAA00019
• Trim Tool Set 1aau.to/oa/1AXXX00006
• 3/8 Inch Air Impact Gun
• T20 Socket
• Ratchet 1aau.to/oa/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXAA00015
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Parts Cleaner
• Paper Towels 1aau.to/oa/1AXSS00035
• Drain Pan 1aau.to/oa/1AXAA00320
• Razor Blade / Gasket Scraper 1aau.to/oa/1AXAA00280
Subscribe: / @trq
Check out our playlist:
Chevy Traverse 2009-2017 1st Generation: • Chevy Traverse 2009-20...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

17 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@lawjr4724 2 года назад

first time mechanic..I put the water pump pulley back on slightly secured the 4 bolts ..put the belt on to tighten the 4 bolts and couldn't because the pulley still turns ...I followed your excellent video to the letter.. what's wrong??

@victorramosjr2239 2 года назад

Can you please do a video on how to replace the belt tensioner AND idler pulley on this same vehicle? Ours is a 2015, & the mechanic I took it to couldn't pull the bolt out all the way that holds the idler pulley in place. He said the bolt was too long & hits on the unibody, & wouldn't come out all the way. So he wasn't able to change out my idler pulley and belt tensioner. I was in denial because I was hoping to get these 2 swapped out with the new belt & water pump just as a preventative measure, not because they were bad. (I had already bought the parts). Please help!

@sylvesterwilson6944 22 дня назад

Yo! I followed you step by step, pausing and starting. Thanks 🙏🏾

@darkhillseuropeanmountsLLC 6 месяцев назад

I appreciate this video soooo much I had to change the water pump in my wife's car today and followed your video the whole way and it went pretty smoothly

@renan8486 Год назад

One of the best videos to changer the water pump. I followed the instructions and the new pump appeared to be leaking. However, the leak was coming from the water outlet. I ended changing the 2 seals of the water outlet. Engine Coolant Outlet O-Ring ID:12584040, Water Outlet Seal ID: 12690764. I recommend to change both seals when changing the pump.

@TRQ Год назад

+Renan Thanks for watching our video! 1aau.to/m/Shop-TRQ

@lelandcox4089 Год назад

I just watched your video! Very well done, good camera work, Good lighting, Professional!

@TRQ Год назад

+Leland Cox Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

@jonathangable2319 2 года назад

Just go through the wheel well. Alot faster and simplier

@toyota4x460 Год назад

But then they couldn’t charge someone $2000 to change a water pump lol

@Dustincooley39 2 месяца назад

Wife’s water pump needed to be replaced. No problem. I’ve done a bunch of them. Quick job. Piece of cake. Got the part for $20 bucks. So far so good. Took a look at how to do it on this car….. well god damn it. I always forget I hate working on anything newer than ‘95.

@TRQ 2 месяца назад

+@Dustincooley39 Thanks for watching our video! 1aau.to/m/Shop-TRQ

@Yamamahama 3 месяца назад

WARNING!! This is a great video and I fallowed it and it is much easier then it seems once you start into it. And doing it from the top like this you can clearly see the gasket is set properly and easily torque all of your bolts exactly. However, at 15:17 where he says you can leave your heat on just lightly, I would like to advise everyone to NOT touch your climate controls at all!!! Your cars climate control will start at 74° which is right in the middle, I actually suggest you just turn on the ignition (one click of the key where the radio and windows will work but not start the car) and then wait two minutes then turn the key off and then start your Traverse and fallow what he says around 15:05, but still don't touch the climate controls for at least two minutes. The reason is after a long time without a battery the Traverse and the Buick and GMC version of this car needs to calibrate the heating controllers that mix how much hot or cold air blows and also if it blows on the feet or window or both. If you turn your temperature too much towards hot or cold, it can cause the actuator to keep turning past the hard stop and crack the internal gears. And in my opinion these little actuators are almost as hard to replace as the water pump.

@KevinNeustadter 2 месяца назад

Good instructions. Going to order the part. Question: Can you do all this from the top down and not take the wheel off?

@jeancinq-mars2949 3 месяца назад

Thanks a lot for producing realy professionnel car repair video.

@MartinGarcia-fi2ms 3 месяца назад

Great video with detailed instructions.Thank you!

@apegues 7 месяцев назад

I recommend a vac-u-fill tool for refilling the cooling system with NO air pockets

@CodyManners 4 месяца назад

This guy has so much more room than I do it seems

@walternags Год назад

Very professional video, good job.

@rafaeljerez3137 Год назад

Good job, thanks

@sr.jessieperez-xw5nq Год назад

... Great video helped me veré much thanks...

@edrasgzacariaslemus8708 Год назад

quality very good work 👍

@KevinNeustadter 6 месяцев назад

I'm going to have to replace my water pump (255k miles, so I'm not surprised) probably this spring as the pump is slightly damp (according to a shop it was in recently). This video is excellent! I had seen another video in the past and it looked much harder because they did not remove the fuse box. Since the fuse box is right over the water pump, it seems like a no brainer to get to it from there. Can you also replace the alternator from the top down, too? Or do you have to access it from underneath?

@stanwalls6434 Год назад

Great job and video, I tried coming in from the bottom just didn’t have the tools to make that happen. So somehow after putting the fuse box all back together I have an issue with no front lights now and it still thinks the hood is open. So getting those blocks tightened back up correctly may be my problem? Can you answer that?

@zeretube 2 месяца назад

Can the water pump be bad without leaking? i fell that my pump is not giving enough flow to maintain the temperature cool

@onesaltyzombie 6 месяцев назад

So just disassemble engine and frame. Disconnect all electrical and set it all aside. Remove trunk and strip paint to remove pump. Set vehicle on fire and voila! Done.

@anonimo7466 Год назад

Good teacher

@KevinNeustadter 5 месяцев назад

Those push pins...what size are they (on the Radiator fill cover)?

@Nostromosailboat Год назад

Para enseñar primero a de aprender, todo se puede hacer desde abajo sin desmontar nada, sólo necesitará paciencia y buena herramienta, yo he hecho ese trabajo en dos horas, por favor, no nos tomen el pelo.