No video :(

How To Replace Your 2005-2011 Chevy HHR Turn Signal Switch

Подписаться 19 тыс.

Просмотров 53 тыс.

50% 1

This video shows how to replace your 2005-2011 Chevy HHR turn signal switch. Here is a link to purchase the turn signal switch: amzn.to/4dHKjqw
Tools you'll need are: flathead screwdriver, Phillip's head screwdriver, 7mm socket, ratchet & extension
If this video helped, be sure to leave a thumbs up and subscribe to our channel for more videos. Thank you!
Our website: www.martinsuse...
Facebook: / martinsusedcarsllc
Twitter: / martinscarsllc
DISCLAIMER: WE MAKE NO WARRANTIES, RESPONSIBILITY OR LIABILITY, EXPRESS, IMPLIED OR OTHERWISE, REGARDING THE ACCURACY, COMPLETENESS OR PERFORMANCE OF THIS VIDEO. ALL VIEWS EXPRESSED IN THIS VIDEO ARE OUR OWN AND DOES NOT GUARANTEE RESULTS. ANY ACTION YOU MAKE FROM THE INFORMATION IN THIS VIDEO IS STRICTLY AT YOUR OWN RISK.

Опубликовано:

15 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 119

@MightyGreedo 2 года назад

Thanks for this video. Very helpful. The project took me about 30 minutes. The replacement part cost me $16 on Amazon. I ran into delays when removing the top panel (0:45) and I also had trouble getting the second electrical plug removed (2:39). A tip for anyone else who is having trouble detaching that second clip; you want to use a small flat-head screwdriver to pry UP the black plastic part. Don't do like me and try to push DOWN on the gray doohickey. Once I pried UP the black tab, the plug came right out.

@resurrectionvehicles1224 2 года назад

Great video, followed it step by step to replace the lever on my HHR. A couple of things I found out own my own might be helpful for future viewers: 1) Make sure the adjustable steering wheel is in it's lowest position - it makes everything a lot easier to come out; 2) Put a white rag or washcloth on top of the steering column in front of the gauges when taking out the top Phillips screws. They are very small and black and me being all thumbs, one dropped down onto to black carpet never to be seen again and the other fell and was wedged in between the steering column and the bezel. I needed a magnet to retrieve it.

@hippy572001 4 месяца назад

I Did It!!! A 67 year young female, Thank You so Very Much!!! 😃

@joedogmckeel Год назад

I have had a broken turn signal arm for 5 years. I have it held together with gorilla tape. Dealer quoted me $400ish and they had to remove the steering wheel so I just lived with it. Finding out the part is under $20 and is a 1 star DIY fix. THANK YOU.

@janieholmes3154 Год назад

I installed the new one , but I couldn't get the tabs to lock on the square part that snaps back in. ?? The one I replaced was broken but functioning. I am 68 and have repaired everything from camshaft Solenoids, power steering motor, A/C blower,resistor, replaced my own spark plugs and replaced other stuff by watching You Tube Videos. My grandpa taught me about tools. My A/C works just fine now.Thank you for this video. 😁🎉

@melissahollowell7255 2 года назад

Super pleased I found this video! My new switch and socket wrench set will be delivered Monday and I am really excited to be able to address this issue myself. I am also changing out the tail light assemblies.

@melissahollowell7255 2 года назад

I did it! It took a bit more (wo)manhandling, maybe because it had never been taken apart before? But everything else was exactly as the video demonstrated. I took her for a lil drive afterwards and it works flawlessly. As an older, disabled lady this is a huge accomplishment for me and I could not be more chuffed about it.

@greghoing1 2 года назад

Great job you the man. Less then 15 min. Part was $20. Must have a 7 milometer socket or nut driver and a small screwdriver. when replacing plastic parts make sure the groves line up before snapping them in place.

@lesliemorton9359 11 месяцев назад

Perfect! Exactly, what I needed to see. Great camera angles and instructions, you did a great job. My replacement went smooth because of it.

@audreyhager8224 3 года назад

Thank you x a million. I have never done any type of work on a car, but am always charged so much when I go to the mechanic. This video made it easy and I did it in about 25 minutes with no problems.

@Trooperdan82 5 лет назад

Thanks for posting this... saved me $175! One small problem, now when I open the door with the ignition off, the alarms dings like I've left keys in the ignition.

@Trooperdan82 5 лет назад

D'oh!! The lights were on! My wife asked that as soon as I mentioned the problem to her!

@kenblair2538 3 года назад

Thank you for the great info . I'm 75 arthritic fingers, and completed the job in 15min. Only issue I forgot to lower steering wheel and struggled abit at first. KB

@uclemons Год назад

One of my great friends sent me this video. It was easy to follow. It tool me about 45 minutes to complete it. After not loosing the screws a few times. Lol

@Cromie45 14 дней назад

Thank you! I'm the farthest thing from a car guy but tonight I'm the household hero

@Saltysailor83 2 года назад

FYI Your video saved me over $220.00 dollars. Local dealer was gonna charge me $250.00 and said it’s 2-3 hour job!

@tearsfordears Год назад

One of the most well lit and filmed video I’ve watched for minor car repair. Thank you so much!

@henryjenkins1631 Год назад

Awesome job man, thanks for keeping the crazy music out of the video.

@JHACbiz 2 года назад

Very helpful video...was able to make quick work of this. I did have to file down the part I got from Amazon. It would not click into place so I reckon it's not made to the correct tolerances.

@jodycarter2271 8 месяцев назад

Just wanted to say you're video was very helpful needed to replace my signal switch on my 2010 Chevy hhr went perfectly thank you appreciate your helpful video 👍👍👍😭

@MartinsUsedCarsCollectiblesLLC 8 месяцев назад

Glad it helped you. Please Subscribe to our channel (even if you turn off notifications). Thank you! - Martin

@janieholmes3154 2 года назад

You make this look so simple. I will be installing mine myself. 😊

@greghoing1 10 месяцев назад

Thanks a second time. I needed to do it again on my new 2006. Still a great easy-follow video. Take your time and don't force anything. The part was still $20.

@markforster6457 11 месяцев назад

Thanks! I was able to replace mine. I'm having trouble replacing the upper cowl, but I'll get it. It can't be totally easy.

@videojay Год назад

Perfect instructions. Changed it out in about 20 minutes. Thanks!

@calebtuyls1259 3 года назад

Did the trick for my 2011 hhr. Left signal worked fine. Right signal would need to be help up or "encouraged" to stay engaged until making a right turn. New signal went in faster than the time needed to finish video.( I watched this video 3-5 times before the part arrived at my house d6254e is the gm part number. I kept the cowl or whatever infront of a space heater while I installed the new switch. I was able to pop the cover in much quicker than taking it out. Thanks for the video!

@MrCelsigns 11 месяцев назад

Oh my good man, thanks for sharing these here, no brain cell on my helmet, but it was a ride, a good ride.

@Ratabilly 2 года назад

Thank you for this helpful video. I did mine following everything you did and it works a treat. The only difference was me swearing like a sailor.

@calgaunt7831 4 года назад

Good video. I was able to replace in about 20 minutes (most of that was finding my tools LOL)

@sebastiancontreras3637 2 года назад

Very helpful, slowly working on my hhr little minor things needed to be replace. Thank you for your guidance!

@dannyjoereagor5383 Год назад

Thank you my brother I appreciate you You just saved me a bunch of money thank you God bless you continue to share with people like me we really appreciate all the help that we can get. Amen

@davidstark3401 Год назад

Thank you so much for this clear and accurate video presentation. You saved me a LOT of money, time, and frustration. I really appreciate it. Again, thank you!

@talstyle1 4 месяца назад

Thanks for this video! It was very concise and easy to understand. I was done in 15 mins. Thanks again!

@jorgemendez5408 11 месяцев назад

You make it look so easy. Thank you for the video. 2023

@jennyc3273 10 месяцев назад

Thank you for this video. It gives me confidence that I can do it myself. :)

@kevo60420 Год назад

Nice video. Will be tackling this today. Nice tips from others too.

@norbertsokolewicz544 9 месяцев назад

Thank you for the video, it helped me a lot 😉 Greetings from Poland

@bassaddict8323 Год назад

Thank you so much for this video! I knew exactly what I was in for and planned accordingly. Of course, the two plastic covers were a pain to remove for some reason and I needed the help of a plastic pry bar to get them started. I guess my fingers aren't as strong as they once were! Also, it took a bit of time to get the new switch to seat in properly but all in all, a very easy DIY fix.

@GregorioP4r4g 7 месяцев назад

Great video. Thank you, I was dreading this job and never realized it was a rather easy and fairly uncomplicated job.

@MartinsUsedCarsCollectiblesLLC 7 месяцев назад

Glad it helped. Please subscribe to our channel. Thx. Tom

@path.1243 Год назад

Hello, sir. I just replaced the faulty control arm on my 2009 Chevy HHR...thank you sooooo much for your video.

@dsnell42 4 года назад

Thank you for this video .My turn switch just broke mins before I view your video. Thank you again

@marklivingston6103 Год назад

Thank you so much for this video! Made it so easy! Wife and daughter are very happy!!😅

@docevans8500 14 дней назад

Thank you for your help with this! 😊

@roiijamez33 2 года назад

Thanks a mil - and yes getting that last piece back in place was the most difficult. All The Best!

@scottpaulson9648 4 года назад

Thank you for this video. It made the replacement of my turn switch a breeze.

@jacobgutierrez2471 4 года назад

Detailed! Thanks, I’m having the same issue with my HHR, you sir are a life savor seriously thanks for the video dude!

@keashiacoleman953 3 года назад

thanks for the help i fixed it myself instead of paying over $200 to have someone else fix it

@christianalexis7953 3 года назад

Thanks! This was quick, easy, and to the point. Easily replaced mine just now. Thanks again!

@arlentesistern6734 3 года назад

Good video. Saved a lot of money. Only one thing the Phillips screws are straight up and down not at an angle. But that’s all, everything good.

@bradholtkampautomotiveinc764 Год назад

Great video! To the point and very well done. I think I had mine changed out faster than the video.

@dukejupiter9469 Год назад

Thanks a lot. Very helpful🙏

@tyronethomason5586 Год назад

Thanks this video helped alot!!!!

@eduardom2847 2 года назад

Great video. You’re the best...

@johannpopper1493 3 года назад

Thank you! Saved me a lot of trouble and money. Excellent channel. Subscribed.

@MartinsUsedCarsCollectiblesLLC 3 года назад

Glad we could help!

@oserrano1910 Год назад

Great video thank you 👍👍

@citycowboy702 Год назад

Awesome. Got it. Thanks so much.

@yournamehere210satx 2 года назад

Quick finding this video. I just need to buy the part now. Just bought a used 2011 HHR and the switch doesn’t retract after making left/right turns. Best to save money doing it yourself than spending an arm and a leg on labor.

@XLR8-1996 2 года назад

Thank you very much sir extremely helpful

@XLR8-1996 2 года назад

How about tire pressure monitors

@gnd7808 2 года назад

Awesome video!! Thank you for putting it out there 👍🏼

@SportsMusicCars 3 года назад

Thanks 4 posting

@bjornschafer8028 Год назад

Thank you Martin love u

@bobbyowens5155 Год назад

Thanks got it in no problem

@spke532 2 года назад

Thank you. Easy fix and saved a ton of money

@ZNA03 22 дня назад

Great video! Thanks!

@jayricohimself 2 года назад

This why i love yt just saved me some money

@lalio2 3 года назад

Thanks so much for posting! Really helpful!!!

@seadogpowers 4 года назад

good video. made the r/r very easy. 20 minutes tops for me.

@miltontaylor5466 3 года назад

Very helpful and informative. Thanks

@Saltysailor83 3 года назад

Seems like an easy fix! Thanks, great video!

@bluehawk7342 2 года назад

Excellent video with one minor exception- the steering wheel column needs to be tilted down (lever on the left side) in order to get that cowling off.

@GGPO_Halfro 2 года назад

Done! Thanks!

@arthurlewis5791 Год назад

Good job. It might be easier to remove the lower parts before removing the upper cowl.

@frickinda 3 года назад

Awesome info sir thank you 😊

@chicagotruckerlifeforlife5570 Год назад

Thank You So Much…🙌🙌🙌🙌🙌🙌🙌🙌🙌

@cityislandfish-adventures 2 года назад

Excellent video easy to do by myself. Save me $80 per hour for my punk ass mechanic 🤣!!!

@mailforvedi Год назад

Thanks 👍

@annamullins5891 4 года назад

THANK YOU SO MUCH... My part should bee here on Tues and then I'll replace it. I'm a 60 yr/o disabled widow and have never worked on cars b4... I cannot afford 2 pay a garage place 2 replace it 4 me but YOU make me think I can do it all by myself. Another issue is the locks don't work on my 2008 Chevy HHR. I don't feel 2 safe drive'n around town w/o be'n able 2 lock my doors... Any suggestions on how I can fix that??? Any help would bee appreciated. 😱

@MartinsUsedCarsCollectiblesLLC 4 года назад

Anna Mullins - If all of your electronic locks are not working from any button, it could be a fuze. If they are making a buzzing noise and don’t work, it is most likely the lock actuator inside the door. Thanks for the review and good luck!

@annamullins5891 4 года назад

@@MartinsUsedCarsCollectiblesLLC THANK YOU... I'll ck that out

@BIGCPROD86 2 года назад

I have a 2009 chevy hhr my turning signal not out but my automatic headlights not coming on nomore in the dashboard lights stay on at night sir if u would in u no do u think it would be that because my automatic headlights dnt come on nomore?

@victorthomas8484 Год назад

Just installed my new turn signal switch and once installed it will not click into the 2 tabs to lock in and I switched the car to ownn position and only my left headlight comes on and both turn signals blink really fast so I installed the old switch and it wouldn't click in neither so what did I do wrong

@markforster6457 11 месяцев назад

I don't know what I'm doing wrong. I'm trying to put the three screws back into the bottom panel, but they won't tighten up at all. I remove my socket and the screw either falls out of the hole or comes out still sitting in the socket.😮

@ronnipaints6128 3 года назад

I want to click, love! Thank you.

@p.t.vega9ne789 3 года назад

Thanks a million

@renemartinez-cabrera9245 4 года назад

Thank you

@customdetailer0078 4 года назад

Would replacing of the turn signal switch fix the non canceling problem I have? When you activate the turn signal either left or right they do work. But then when you turn the steering wheel they won’t click off. You have to manually move the switch. Any advice would be appreciated. Thanks

@MartinsUsedCarsCollectiblesLLC 4 года назад

Yes, replacing the turn signal should fix the problem.

@customdetailer0078 4 года назад

Martin's Used Cars & Collectibles LLC Thank you!!

@jacobgutierrez2471 4 года назад

Literally the same problem I have on my car! Going to place a order on a switch on eBay they’re about 20 bucks. I look forward into doing this. This guy with his detailed video is gonna Help out amazingly.

@unclestuntman 3 года назад

Thank you!

@frankpetruzzelli9854 Год назад

What size socket did you use to take the bolts out from underneath?

@MartinsUsedCarsCollectiblesLLC Год назад

7mm socket

@dyna1955 Год назад

My turn signal lever will not stay down or won't return after making my turn. Will the new switch fix this problem also?

@MartinsUsedCarsCollectiblesLLC Год назад

Yes

@trisharush6070 3 года назад

If I was having problems with my turn signals and now suddenly I have no rear turn signals or brake lights, could this be the problem?

@MartinsUsedCarsCollectiblesLLC 3 года назад

No rear turn signals or breaks light are most likely from another problem.

@Sundaymorningrecorded 3 года назад

Actually showed evwry step . to many videos tell u what you gotta do then skip to it being done. Showing how u struggled actually helps seeing which way to take apart

@j_S0VEREIGN 2 года назад

My turn signal works on my HHR, but does not disengage when my steering wheel is back to center. Can it be the whole turn signal switch?

@MartinsUsedCarsCollectiblesLLC 2 года назад

Yes

@anndavis725 3 года назад

Awesome!😘

@markmark266 5 лет назад

Got the plugs out but even with the clips pushed down with a flat head on top and bottom switch still won't come out

@johndillinger3988 2 года назад

Lol I'm a total NERD. I went to the junkyard , took off the top and bottom plastics that surround the steering column. I still couldn't take off switch so I took off the airbag , steering wheel , steering clock spring , broke a key off by accident so it's stuck in the ignition , then couldn't pull up the tabs .. but finally got them off . I should have just watched the video lol oh well . At least it was a junkyard car 🚗 🤷

@davidmorris9668 3 года назад

Nice!

@markmark266 5 лет назад

Did what you did can't get the switch too come out any thing else I can do

@MartinsUsedCarsCollectiblesLLC 5 лет назад

Don’t get frustrated, slowly go over the steps and keep trying.

@oveidasinclair982 4 года назад

I just went to the salvage yard this morning and took one of these off, took 5 minutes to get it off and $17.50 for the part

@MartinsUsedCarsCollectiblesLLC 4 года назад

Oveida Sinclair - Yep! Love the junkyard parts store.

@lblackwood95 4 года назад

Where did you get the part at? They want $50 for it at Auto Zone.

@oveidasinclair982 4 года назад

@@lblackwood95 LKQ you pull it Salvage Yard, they're in a lot of states, there are 4 of them with 45 minutes driving time from my fathers home.

@laclarewilliamson2157 4 года назад

You have beautiful hands😂

@markmark266 5 лет назад

Any other idels can't get it out of the don't won't too release out it's unplugged and top and bottom is poped lose

@MartinsUsedCarsCollectiblesLLC 5 лет назад

The plugs have tabs that need to come up in order to remove. Also, the turn signal has a tab on top and the bottom that you have to push in with a flat head screw driver.

@Rs6Quik 3 года назад

Would you be able to do a twisting motion with a spludger, or plastic flat pry tool, place it parallel to the plug and twist to slightly encourage it free!

@veedubden8710 3 года назад

3:16 You Failed to share the fact the clips to hold the turn signal stalk need to be pushed up into place to prevent the stalk from being loose. It just doesn’t slide in and automatically snap in by itself. Your lack of pointing that out makes the video less helpful.

@MartinsUsedCarsCollectiblesLLC 3 года назад

If your turn signal doesn’t snap into place right away, make sure you push the tab on the top and on the bottom so it locks into place.