How to Replace your Sagging Civic Headliner! 

Need to pull the headliner forward towards the windshield first until it completely comes off. This will avoid damaging pulling it back first. Great video!

Great tutorial, thank you for this. Going to do this to my 98 EX coupe. Just wanted to say, for anyone else trying this, try to make sure your adhesive is flame resistant. The OE one usually is, and I've heard tell that lots of spray adhesives - including some of 3M's popular offerings - are *super* flammable. Small fire in the car can quickly set your whole roof on fire if the adhesive isn't flame resistant.

Dude! That looks so good. Ready to see the finished unit!

looks good so far!!! cant wait for the next episode with mint interior

A couple things here: 1. Get a wire cup wheel on a drill or right angle grinder to make quick work of the foam on the headboard. 2. You can pick up some sun visors cheap at a salvage yard if you can find some in good shape.

Huge improvement. It's going to look so good once installed. Thanks for the confidence, gonna tackle it myself now for sure.

I liked the way the glue you used has a nice wide spray. Definitely makes the job easier. Good job 👍

Awesome vid man, as always! Super thorough, this is def going to help me when I remove my headliner on my EM1. Your headliner now looks brand new again, well done my friend, well done 🙌💪👊

You have a cool personality and some cool teaching skills.

Great idea on using a grill brush!!I’ll be doing the same for sure. Can’t wait to see it all put back together 👍

Dude thanks for all your hard work!

I had lost your channel and I found u again ! Thank for the help !

Thank you man made me learn a lot I need to go try this on my EM2 it desperately needs it

Lovin' this series bro!

Thanks for the video I’m about to do this same process on my civic and it’s nice to have a fast but detailed tutorial to follow along with

I just finished my wife's minivan 9 feet long had to use 4 yards for the Grand Caravan. You are right about the stickiness. Instructions said to wait 5 minutes to get tacky so I messed with my dog and the wind blew my material over and it stuck to itself permanently. Had to reorder more material. I used a soldering iron to cut out the holes.

Interior is gonna be on point after this 😤

Great video and well explained tips!

Thats looking solid 👍🏻

Great tutorial Thank you so much im going to try and do this to my 2000 Honda civic.

Lookin good Rob!

Awesome looks new...good call on the lighter color

Quality video man👍🏻

Nice, I did the same to my ej8 a year ago, found out the Hobby Lobby closest to my house has headliner material in stock. My project cost a little more because I bought too much adhesive, but still well worth it.

That spray looks super handy, sprays a s nice wide pattern. Does it have a special tip orso?

Came out super good. How many cans of glue do you use?

2 things i learned from doing this: 1- when removing the old foam, i realized u can peel the very top layer of the board material and just peel all the foam off with it and there is still plenty of board left, i took some 600 grit to remove a few little burrs from the peeling, way quicker than scraping and scrubbing it off 2- any little tears/ little imperfections that would show through the foam, i applied a little gorilla glue then sanded it flush when it dried

Nice and easy tutorial!

what’s the best way you found to take the A pillar trim off? i got a 98 civic sedan that i’ve been meaning to put fabric on those pillar trims but don’t want to break the plastic because it’s in awesome shape

Thank you .... this vid has been helpful

You are a legend! Lots of hard work! Im planning do this for my civic 2001 ! Lets see how it goes

I would love to know where did you buy the roof liner ❤ and the restoration kit for the carpet..

Super nice hatchback!!!!👍

Kick a$$! Im gonna do my Ex soon.Where did you get the material?

I think i would have putten some de adhesive to make that repair on the headliner. Was that simple paper tape?

Is it similar on a sedan? My headliner is real bad and I am likely gonna take it out and end up getting a shop to cut me out a new one, but I don't know if that's doable. What are these made of usually?

Yo, American civics have a coat hooks in the bag? Nice xD Also awesome video! I don't want to miss you workin', on the daily, then home office is over.

I just bought a ej9 with a d16z6 swap in it. Owner said he rebuild the engine 2k miles before: new rings and "new rod bearings, because they had some little scraches" and I drive it home less than 200 miles and it starts rod knocking I think, the sound comes from the oil pan and when I am under the car and listen I fell my heart being mushed. Any thoughts? Is it that bad to gen the crank redone and use bigger bearings? I plan to build it for 400 hp but I wanted to learn the car at this power lever. Thanks in advance

So it’s been exactly 5 months since you uploaded this videos. Good job man. How has this been holding up with the prep and that adhesive? I just bought a ‘98 4dr civic Ex and the whole headliner was sagging so I peeled it off as much as possible. Must redo!

Can you put a source for buying link for the headliner material with foam so we can buy similar to yours? Thanks!

The best thing to use to take the old foam off is a dry dish sponge.

Well done bro

Hey great Video! Did that crease work it's self out? Or should we apply some tension to the fabric when laying it down?

What company or website is good to purchase these from?

Thank you

Do you know if you can pull it out of the truck I don't have a hatchback

Can you please say where the new fabric is from ty.

Nice video! Please let me know where you bought the headliner? Mine is sagging and coming apart as well.

Is there a video showing the carpet removal?

Yo.... that really came out good, can't wait to see it all back in the ek. That's gonna look perfect 👍 great job

I remember doing this with my brothers friends eg hatch we had the same cardboard problem. What we did to the foam was the same as ur method combined with just peeling it like a mango. 😅

Where did u get the fabric from

Thanks for the great video! Do you have a link for the fabric supplier?

Nothing like getting rained on while working on a project lol Florida

How do you remove the 2 circle clips

junkyard. matching headrests to your front seats. custom bracket/weld install in rear seats. ;)

Guys there is no need to scrape anything, the foam layer is an adhesive tape layers that peels right off.

Okay that didn't show anything how'd you get the exact curves on their how'd you get the rounded areas do like an 01 Honda Civic

Crap always when I watch these vids they remove those panels so easy. Mine is al covered with extra steips alongside the tdoor trim. Plus my seatbelts are adjustable, no cap there to remove like he did. I only need to check my tail antenna for a leak. I need to take out the complete hood interior for that, everything is overlapping and those back pillar covers are screwed to the frame and those are covered by the lower hood interior.... 😭😭😭

I threw away the headliner board for my ek hatch after noticing there was mold on it from the hatch leaking. One of my biggest regrets honestly

I have a 4 door sedan i assume its gonna be hard asf

Too bad I threw the whole thing out. But then again maybe I should just continue removing stuff for all of the weight reduction(even if I'm not adding any power adders yet, sure will be nice increasing highway mileage, even if by a gal per)

cleaner yeah

Do you have to take off the foam??

I just redid mind for the 10 time every Honda I get I do it to um

How much headliner would I use?

❤

Its not dust its the old foam deterring

Where can I find this fabric?

Not such a nice day I guess lol

How do you have black interior lmao

he busted his car..

Great content Like share and subscribe

If it was a customers you did it wrong because you can’t install with the trims without damaging or creasing the headliner

Bro that civic is trash

Greetings Lionel Messi