How to reset Exhaust Fluid Fault on 2014-2022 Ford F250, F350 6.7 diesel speed limited to 50MPH 

Thanks for the video! This worked for me while in limp mode! No computer, idled on 3000Rpm with engine brake on until oil temp reached 220 or so and the warning went away. Cut off for 2 min then drove it up to 80mph. Thanks again! 2019 f250

Thank you so much this fixed my 2014 f250. I was stuck out of town worried but after watching your video it worked 100%. Super happy. No computer , did heavy accelerations + 80 mph freeway and went away while driving . Saving this video for future references.

The day after we bought our 2016 F250 6.7 black Beaty , we were driving cross country to another wind job and limp mode hit pulling a fifth wheel! Called our very knowledgeable finance guy/ cowboy salesman/ friend/family from Hereford Texas at Whiteface Ford Mr Paul E. Jackson ! In his very southern draw “ Did you stop and put diesel in it ? “ “Well yes! We’re in Colorado now!! “ He said “Well you Kansas sunflower ,…did you leave the truck running while you were putting the diesel in?” “ As a matter of fact, we did ! It was too hot for the dog ! Had to leave the air on!” He said “ Well not no mo !” We had to pull over shut it down remove the battery positive and negative for about several minutes , connected them back up, started it up, and it reset itself!

This fix worked for me without a computer. Fast idled for about 25 minutes and got oil temp up to around 212 and followed the procedure. Had to do fast acceleration twice before it reset. Saved me some $. Thanks.

It's a crime Ford does this to people.

This fix my truck today save me some money mine did this from sitting in my drive way for like 2 months

Man I was the best video ever it definitely fixed mine the one I was working on and I thought I couldn't figure it out forever and ever but that worked for me thank you buddy

This worked for me also... i has a scanner and was able to watch the temp come up on the #14 egt and followed the ret of the direction. THANK U!!

Sir, thank you for making this video. It worked like a charm.💯

What work did they do?

You are so back and forth very unclear what to do you need to say 1 do this 2 do this 3 do this etc. etc.

Great video

I just added DEF, filled the tank, and filled it up with diesel and did a system check on the console. Seemed to reset itself. Maybe I was just lucky.

Your videos have been helpful; thank you! Do you have the procedure link for this?

hey Brother, if my truck can't drive 80mph, my truck can move only idling. What is the best way for me? thanks for the video

Will it come off when driving or after 30 min idle? Do you shut off after 30 idle?

Ya tuve la troca acelerada por 40min y no alcanzo la temperatura de 440 bro ?? Alguna razón ? Nomas llego a 250

Thank you

Buenas tardes. Have a question do you need the computer to reset it ? Or can it be done without the computer? Otra pregunta before u idle for 30 mins, you said you have to accelerate it, how fast did you go or accelerate for ? Gracias in advance

Buen video bro, ya estoy subscrito ojala sigas haciendo este tipo de videos, saludos desde mexico

La camioneta está en relenti en este momento si le hago un delete de catalizador cres que funciona bien?

I have a2020 f350 it’s stuck at going 8kms I’m doing this as I type this out. If it’s doesn’t work the first time I’ll do it again

Thx🎉

Will this work if your truck is in complete limp mode. Like only goes 5 miles an hour? Thank you for your help

Mine jus popped up out of no where and my tank is full but i drove it down the road for like 20 minutes and then it went away

Yo voy haciendo eso 5 veces y nunca se quita el engine idled, que estare haciendo mal? 😢

I have 2016 250 6.7 with def fault and limp mode don't know how to fix it you have any idea thanks

will this work with a 2016 gmc duramx

What if i am not getting any codes.?

Does this work on the f550 10:06 10:08

Rehearsal makes better video

So i ran this procedure and after inlet it sit for two min and then started it again the injector jumped to 99% but the pump stayed at 0 and never came up and started dosing. Would you say the pump is bad?

That poor engine…

Delete))