Great little chip resetter I have one works great just like my man said just line them pins up and push once it turn green you good to go great video and explanation 👍
I hope something works for you. I’ve never had this issue but I hope one of them works. I know it gets frustrating at times but stick with it, either letting it sit with power off or maybe clean where the chip meets inside the box holder.
Great question. If you have your ink going to another waste tank order than what’s in the printer you can reset the waste tank as many times your resetter is properly working. Hope this helps.
Nice trick, I had this for resetting my old Epson ink cartridge's. Moving forward, resetting this box does not empty the ink in box,, So, When the message pops up, its bcuz box is full. So is there a 2nd video to this?
Yes I have one other video showing how I rerouted my ink line outside of the printer to an external bottle. My ink line does not go to the ink cartridge.
Hello, ensure that you're aligning the maintenance box correctly with the guides and applying even pressure. If it still won't click, check for any obstructions or misalignment that might be preventing proper insertion or check for maintenance box for damages. Hope this helps.
hi. thank for the video.. do you have any suggestion how to re initialised my printer ink. et-8550. i din't run it when I setting up my brand new printer and now there's a problem in printing;( thank you in advance for your help
If there isn’t any ink running through the lines, my suggestion would run a power clean to cycle the ink. This will use some ink so be aware where your levels are after. Hopefully that helps.
Hmm, maybe try to unplug the printer for a min or so, then plug it back in. Another thing is to make sure you get the green light when resetting the boxes. Lastly make sure the box is seated properly or locked in or even check the connection between the two (box and printer) and it’s properly locked in. Hopefully your boxes are corrupted in any way. Best of luck.
No, if you replaced the box with the correct one just make sure to firmly seat the box until it secures into place. Other than that pressing the OK button on the printer to continue. Try other methods as to unplug for about 30 seconds and try again, make sure the chip on the box is clean of dust, dirt or ink.
No, the maintenance box isn’t hooked up to the waste line. I have a video of how to reroute the line to an external waste “bottle”. The box is there to keep the printer operating properly or in a state where you can still print.
I apologize that I don’t have an answer for this, you may have to get with your local or international supplier(s) to get something shipped quicker than having it shipped to yourself.
I reset mine it shows the green light but when i replace the box and try to do a power clean its saying i need to replace the box... any ideas? I just got my printer 2days ago
I’ve never had this issue but I would try to reset again and try to seat the cartridge firmly and try. Other than that I would unplug the printer for a couple min and see if that works. I hope this helps.
I have a video that can show you how to reroute your ink hose to an external waste tank. But yes after about 50 prints- give it take a few- that waste tank will fill up, if it hasn’t been rerouted. I have a 2 liter soda bottle as my waste tank and when the printer thinks my on board waste tank is full, I would take the maintenance box out and reset it and place it back in it housing. I hope this helps.
Can you explain your situation as in the use of your box, you’re not using it as a waste tank, correct? Make sure you’re using an external tank for your ink waste so you’re able to reset the box correctly.
@@graphixbygartee Will the waste is going into a ciss machine so I'm not using the waste tank for dtf the printer is giving me a message the maintenance box needs replacement so I removed it added the Chip resetter light y Turned green put it back and still giving me the error message
Is your resetter have any lights respond when you put it on the pins? Make sure to also depress the resetter for about 3-4 secs once on the pins. If that’s not the issue I’d return it for another one.