How to sand and polish epoxy resin coaster | Resin Diy

Подписаться 439 тыс.

Просмотров 1,2 млн

50% 1

How to polish the rough resin works to the mirror state, let's start learning today. Let your work shine too.
【 All Resin Art Supplies 】
From Beginner to Expert, Only Here ↓↓↓
tools.buzzresin.com
【 Material list 】
1. Epoxy Resin: amzn.to/37ACrVw
2. Resin Making Kit (Supplies and Tools): amzn.to/3AV4lNl
3. Resin Pigment (24 Colors): amzn.to/3B3YoO3
4. Silica for making dried flowers (1.4 LBS): amzn.to/3NGgufl
5. Plexiglass sheet (5"x7" 0.043" Thick): amzn.to/3xg2d0V
6. Disposable Gloves: amzn.to/3ve8AU0
7. Large Silicone Sheets (15.7 x 11.8 inch): amzn.to/3NBq8Qj
8. Silicone Resin Measuring Cups Tool Kit: amzn.to/4aqnU03
9. Vacuum pump for resin (2 Quart): amzn.to/3v86PaZ
10. Mica Powder Pure: amzn.to/2Kvf0Ha
11. Silicone mold: amzn.to/3v9cKfY
12. Mini Handheld Heat Gun: amzn.to/48cEu1V
13. Sandpaper (120#-5000# 9x3.6 Inch): amzn.to/3S1laPL
14. Resin Polishing Past: amzn.to/3gw8sD9
15. Wax Polish: amzn.to/3TzowKF
16. LED String lights: amzn.to/3XKGwl3
【 Resin Tutorial 】
Polishing tutorial: • How to sand and polish...
Get Bubbles Out tutorial: • 5 Ways to Get Bubbles ...
Preserve Flowers: • 🌼How to Dry and Preser...
Hi everyone.
Hope you enjoy my video. Thanks for watching! 😊
Subscribe and like it. 😘
Subscribe: ru-vid.com?s...
Facebook: / buzzingfish-1174141296...
Pinterest: / buzzingfish
Instagram: / buzzingfish.resinart
#resinArt #resin #polishing

Хобби

Опубликовано:

20 июн 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 964

@madwitch58 7 месяцев назад

Finally how to video where I don't have to listen to someone telling me their life story before they get on with showing me what I am watching the video to see in the first place.

@sailaja3638 4 года назад

never know that many nomber of sand papers exist😀

@toquesha 3 года назад

Lol for reals damn

@therealityartist9057 3 года назад

Hahaha me to

@quritannn8989 3 года назад

Yea they do. The higher the grades, the finer it is.

@luvadventuresandart 3 года назад

😂😂😂 right

@ilovepurple6639 3 года назад

Right and all I wanna do is learn the basics of resin so I can start my shop 😭😔

@fuzzydogpa7348 10 месяцев назад

$5k worth of sandpaper later and 500 hours of my life I have a $5 coaster to show off to friends. I think I'd rather leave it as it is when first done with no sanding and it's still shiny.

@bakescake1254 4 года назад

"i know what i have to do but i dont know if i have the strength to do it" is exactly ehat im thinking right now. welp, better get to work

@continentalmix6914 4 года назад

Thank you for taking the time to explain in detail how to do this process. You are helping so many people. GREATLY APPRECIATED 👍❤

@BuzzingFish 4 года назад

You are welcome, let's learn new knowledge together. 😊

@preethas7710 4 года назад

I bought all the supplies but watching this video, I’m like what have I gotten myself into! Polishing will take half of my lifetime for one piece 😨😫

@youtubeaccount0x073 4 года назад

Preetha Jasmine polish only once and make a mold from the polished item and all the items you cast from it will be polished.

@preethas7710 4 года назад

SNKRhead Games 🤩 wow

@eddielozada3694 4 года назад

Prepare your work area, put your favorite music, a good chair and just enjoy your work. If you have a small electric sander(like an orbital sander or a vibrator sander) you can speed up the process considerably. Once you have the first one polished the new molding will be polished too. Good luck and have fun!

@handsmagic786 4 года назад

From where u got polisher?

@Jenny-gs4tj 4 года назад

What polish do I need to get?

@preethas7710 4 года назад

Wow the end result! You deserve a diamond ring for your patience and artwork 😍

@tommo120 Год назад

Simple, straight forward, and to the point! Great video, thank you :) Final result looks great!

@snoopylovez 4 года назад

This is what time and effort spent looks like in the end..a truly wonderful piece that shines and doesnt dull. Well done

@BuzzingFish 4 года назад

Thank you, I hope you can learn how to polish resin or other things. The basic steps are the same. 😊👍

@salyhaa498 4 года назад

What r they using as a liquid

@snoopylovez 4 года назад

@@salyhaa498 water

@BuzzingFish 4 года назад

@@salyhaa498 It's just what. 😉

@BuzzingFish 4 года назад

@@snoopylovez 👍

@Missknottylocs 3 года назад

Wow the amount of love and care to buff that piece to a beautiful shine. Thank you for sharing 😍

@JanecShannon 2 года назад

This was a very useful breakdown of sanding. thank you. Especially the bit about sanding for 2 minutes.

@Mokso 4 года назад

Hi! Can I ask what is the material you use with the Polish pasta? It is a simple rag? Thank you!

@BuzzingFish 4 года назад

I use 60-10000 grit sandpaper, you can search in amazon "sandpaper 60-10000 grit" 😉

@tammylynnambrose8050 4 года назад

It's a cotton rag

@nickyjohns3602 10 месяцев назад

0.5 micron diamond lapping paste you can get it equal to 10,000 upto 100,000 I go upto 60,000 on opals which is unseable to the eye each thing you work with can require a different product ect

@nickyjohns3602 10 месяцев назад

I also use micro fiber cloth or leather or felt block depends on what you are polishing

@muslimalao2542 8 месяцев назад

Hi, I’m a beginner. Why my project book mark for an instance keep bending even if I follow 1:1 ratio? What might be my mistake?

@alishanmao 4 года назад

question. why do we have to go through all the sand paper say from 150 to 700. Why not straight use 700 and then polish it?

@BuzzingFish 4 года назад

This video is the most basic polishing video. If you have a power tool, you can speed up the polishing process. If your resin works have small scratches, you can even start from 2000 😊

@nyxx5357 3 года назад

I know I'm very late, but if you try to sand something rough with fine grit sandpaper, the sandpaper will clog really quickly, so you'd essentially be wasting it.

@carms.creative 3 года назад

@@BuzzingFish So is it even necessary to start with a coarser sandpaper? I would think just starting with something finer would make more sense. Or am I missing something?

@ElwinWay 3 года назад

@@carms.creative Resin often doesnt set with a perfectly flat top surface. Starting out rough on flat surface will help flatten the resin surface and make for a good mirror finish.

@helmi2577 3 года назад

@@ElwinWay can i go up to 2000 grit then polish, will it looks good

@skipnick 3 года назад

im just impressed with how quickly you can sand things, thats impressive

@BuzzingFish 3 года назад

Haha i am a robot😎

@preethas7710 4 года назад

After seeing the final piece: I love you 😍

@alicelee5952 5 лет назад

That's true. Thank you for your careful tutorial. I hope you will get better and better.

@BuzzingFish 5 лет назад

Thank you. 😊

@bryannacranfill5342 4 года назад

Is that just water being squirted on there?

@DLee1923 2 года назад

Wow !! This turned out GORGEOUS !! It looks almost like 3D !! 😍🙋🏻‍♀️

@agwoolard3259 6 дней назад

Ummm.. it is 3D....

@bjj21 4 года назад

Thanks for the quick and well explained tutorial!

@aruglaempire2518 Год назад

He did not EXPLAIN anything.

@beasaroseco5840 3 года назад

P100: He ruined it!😱 P10000: I believe in miracles.😏

@fyou7305 3 года назад

Ty for this video. I didnt have all the sand paper needed. But had some, so I decided to try it anyways. And it was a huge difference

@robinshane4661 4 года назад

Thanks . I really needed that. 😍

@BuzzingFish 4 года назад

I am very happy to help you. 💕

@MGM-ej8wx 3 года назад

Thanks for sharing. I’m curious what it looked like before? Is this method used if something is dull and scratched? Can certain sanding grits be skipped to polish quicker? Thank you.

@UkrainianBoutique Год назад

*What a wonderful tutorial!*

@daQuiane 3 года назад

Hi!! I’m from Brazil, this is amazing! Thanks for share ♥️ I gonna try with my resin craft

@user-lp9zr7eo4n 5 лет назад

فيديو جداااا جميل ومريح للأعصاب والبصرمن شدة جماااله ياللإبداااااع 😍😍😍😍😍😍😍😍😍😍😍😍

@BuzzingFish 5 лет назад

شكرا لكم. 😊

@adamdema403 4 года назад

@@BuzzingFish ممكن اعرف اسم الماده اللي حطها علي السنفره ؟

@bigdoinks 4 года назад

thank you for this! i just messed up my epoxy resin so i needed to learn how to polish and fix it!

@BuzzingFish 4 года назад

You are welcome. We learn together to improve ourselves 😊

@tahiraaamer3114 4 года назад

I sanded it but i m not getting the shine back what to do

@aikomaykorenaga1642 4 года назад

Very nice and detailed video now i can sand my work to crystal clear

@scottt725 Год назад

now this is top-notch work.

@ade4679 4 года назад

amazing process....:* thanks for sharing.

@BuzzingFish 4 года назад

You're welcome 🌹

@girishkumar6530 5 лет назад

Nice nd clean explain, thank for posting this video

@BuzzingFish 5 лет назад

You are welcome, I hope you can make your work more beautiful. 😊

@girishkumar6530 5 лет назад

@@BuzzingFish yeah sure💯

@WoodWorkingArtCraft 3 года назад

A great way for those who need to polish small surfaces without the need for machines!

@BuzzingFish 3 года назад

Woodworking - Arts & Crafts, you are welcome, I'm glad you like my resin work, thank you. 😊

@debrapelisek5636 2 года назад

Beautiful piece!

@BuzzingFish 2 года назад

Thanks a lot debra pelisek 😊

@user-cd7wo8xy4g 4 года назад

とても綺麗です♪

@BuzzingFish 4 года назад

ありがとうございました。 🧡

@johnl8707 3 года назад

This is the process, for sure.... but it doesn't have to be so exact and time consuming, every time, unless you messed up when you're working with epoxy. You don't always have to go grit by grit, from a 400 to a 10,000. Work your way there but always finish with a 10k and a polish. I generally start at 1000 grit. Go to 3000, then 5000, then 10000, then finish with a polish. But the key is to not have mistakes before starting. If you get a bug or a hair or a bubble because you didn't use your heat gun... start at 150.

@BuzzingFish 3 года назад

You are very right, thank you. I have also learned how to polish resin quickly.

@yukfunglun958 4 месяца назад

真的好實用。

@rooo1727 2 года назад

I follow from Egypt You're really, really good. thank you for your effort 💜😍

@marjoriestokes2468 3 года назад

Thankyou great video helped me big time 👍

@therealityartist9057 5 лет назад

This must be the only video i have ever seen where someone explains how to do this properly unlike other people who have never showed me properly how to get a good shine like this and I use epoxy resin all the time and have tried so many times to get it right over and over again and still i can't get it to come back again like this super shine and just stays dull and scratched looking and cannot see through it

@BuzzingFish 5 лет назад

Thank you, you have to make sure the grit of the sandpaper is gradually increased, and you can get a smooth resin work. 😊

@alicelee5952 5 лет назад

That's true. Thank you for your careful tutorial. I hope you will get better and better.

@rachelroberts4409 4 года назад

I thought the same thing. Thank goodness they explained it step by step. On such a small item it has been the biggest educational tool ever.

@abdullahmatboli9493 4 года назад

You can go to polishing disc with polishing paste after the 20000 grit sand paper.. Its much faster and you will get the same results

@FennahMakes 4 года назад

Did you know you can also polish with toothpaste xD ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-m-pnL-7vwJA.html

@ashraf61 5 лет назад

Good Job. Thanks for sharing. ;-)

@BuzzingFish 5 лет назад

Thanks, you are welcome. 😊

@Aangel452 4 года назад

Wow... just magnificent.

@suritadass1336 3 года назад

You’ve saved me! Thank you!!

@lucym2534 3 года назад

Watching this when i dont even own a resin mold🌚

@sonialoves444 Год назад

great video, thank you. approximately how long did it take you for this one coaster in real-time?

@BeautyfulButterfly13 3 года назад

Just beautiful. Did think I'd needed so many different sanding sheets.

@BuzzingFish 3 года назад

this is an early tutorial, this is also the dumbest way to polish😂

@brute1604 Год назад

@@BuzzingFish do you have an updated version?

@souriryaz5504 2 года назад

I love your work, it's always creative and well finished... But I have to tell you, you have very beautiful hands! I always end up thinking that they are as beautiful as your art ;-) A compliment all the way from Belgium

@janisink650 4 года назад

Hi Is it necessary to sand with all these sandpaper or can you omit any steps?

@lisacarly53 3 года назад

This is beautiful! Can I possibly ask a question? If I have a resin pendant that has started going matte (it has a sterling silver backing) should I use sandpaper to get rid of any inconsistencies before painting with a gloss? I'm not experienced and don't want to ruin the pendant further. Thanks!

@user-gl8zk1su9c 2 года назад

Drop it in paint thinner and bleach mixed 1 to 1 for a day and it should be looking brand new by then

@christinahartman9867 2 месяца назад

Thanks. That's the one thing I could never figure out.

@lefthandstory1280 3 года назад

Amazing,very nice😉😉

@aliciadodder 4 года назад

First off, this is beautiful and like everyone else said you did a great job sharing the whole process 👏. But now I have question, once I use polish in the end won't it cause the coaster to be to slick to hold a drink?

@veronicalozano9569 3 года назад

Ali Doe i add cork to some of my coasters, unless its a clear one i add these little clear rubber circles so theyre sturdy enough for drinks (:

@marv1vo 2 года назад

Never thought that sanding a resin is this complicated. Do we really need to have all those types of sandpaper to sand a resin?

@quintonclyde198 2 года назад

You can jump strait to a finer grit paper if you dont care about making your piece strait before you polish it. The shine Imight not last as long though if jump right to a super fine grit

@Whispathehallowed 3 года назад

Great video, thanks.

@annaroshin1459 5 лет назад

Wow!! Loved it🤗

@BuzzingFish 5 лет назад

Thank you, your work can look better. 😊

@annaroshin1459 5 лет назад

@@BuzzingFish I am a kindergarten teacher and love to watch your work. You have patience.

@BuzzingFish 5 лет назад

@@annaroshin1459 Thank you a lot, to be good at work, patience is the first priority. I think you also have patience, you can make it better than me. 😊

@annaroshin1459 5 лет назад

@@BuzzingFish Thank you😊🤗

@rosioochoa2223 3 года назад

The results were amazing!! But goddamn that's a lot sand paper

@kuirfan1085 3 года назад

For the polishing process, did you use only lapping paste or together with the Flitz (in the description) as well?

@deweyoxburger5470 Год назад

Very detailed and makes sense, but man, what a colossal hassle. LOL. Beautiful results.

@t0epd 4 года назад

It is very beautiful

@BuzzingFish 4 года назад

Thank you a lot. 😊

@alikhim7774 3 года назад

Any tips for 3D rounded objects? Like hearts? I’m having trouble getting rid of my scratch marks from sanding

@kaylablondin5695 4 года назад

Can you use this same concept for epoxied tumblers? I put a final layer of epoxy on a tumbler and there are a few spots where tiny dust particles landed on it. Could I use a high grit sanding pad with that paste and buff it out without having to do another layer of epoxy over it? What all would you recommend? Thanks!

@BuzzingFish 4 года назад

Yes, you can also polish the glass like this, but the hardness of the glass is very high, so you need to pay more patience and time. 😊

@primrosekingdom3664 3 года назад

did that end up working for you?? i had the same question but havent actually tried yet. lmk

@user-funfuntoy Год назад

amazing! Thank you for sharing.

@kaylajane08 Год назад

So crazy you can get this amount of shine without doing a top coat!

@shonesurendran5337 4 года назад

Hey, thanks that’s really helpful. Question, im a newbie at this, is there a benefit of sand paper over a Dremel/rotary polish?

@shailaii1241 4 года назад

You have more control when sanding by hand. With dremel it's a second when you lose focus and sand too much

@cherie_aka_turtlequeen1325 3 года назад

@@shailaii1241 i wish I could LOVE your comment. I'm also new and bought a dremal. Wish I would have just used my sandpaper

@nikkifark 4 года назад

Hi there, great video! What is best kind of cloth to use for that paste? Thanks!

@BuzzingFish 4 года назад

Cotton cloth is the most suitable. 😊

@BrainToMush 3 года назад

Beautiful!

@BuzzingFish 3 года назад

Thanks a lot BrainToMush 😊

@sumeraki2424 3 года назад

Thank u so much...much needed

@BuzzingFish 3 года назад

Thanks a lot Sumeraki 😊

@luciferbritesun6976 4 года назад

came out beautifully great job , but wow thats a lot of work , and damn you have fast hands lol

@BuzzingFish 4 года назад

Thank you. You can do it too.

@theluc1f3r93 3 года назад

I expect ending with words ,,no more epoxy left, cause of many samdpapering” :D

@Jesauce. 3 года назад

Lol

@Jesauce. 3 года назад

Maybe we need to make it thicc

@jaderioldan3668 Год назад

I feel like there’s a bidding going on as the numbers are shown!🤣 Very good video❤

@craftersepoxy8884 3 года назад

love this

@LoudNoob 5 лет назад

Where do you get that sandpaper? I cant find grits over 2000...

@BuzzingFish 5 лет назад

You can search for "Waterproof Sandpaper" in amazon and you will find many grits over 2000 😊

@eddielozada3694 4 года назад

Auto paint shops also have all kind of grits

@hayleighgremling3016 3 года назад

There has got to be an easier faster way to do that!

@heyrobert8337 2 года назад

I wish there was but I don't think there is.. can't rush art

@Cerulium 2 года назад

Power tools

@axxessorizeme102 2 года назад

Same thing I said

@Cerulium 2 года назад

I've been experimenting with applying a layer of epoxy over a lightly sanded piece to make it super shine and it seem like it works pretty well

@alabanzasstudio6670 5 лет назад

Hermoso, gracias!!!

@BuzzingFish 5 лет назад

Gracias. 😊

@ramonaraujo9687 Год назад

Gracias se lija toda la pieza

@keys1177 4 года назад

Like 80 bucks worth of sand paper

@oj5826 4 года назад

KEYS 🔑 but once you have it you use it for ever

@TheDanielShepherd 4 года назад

More like $8...

@oj5826 4 года назад

TheDanielShepherd ikr I have even more for 12 on Amazon

@freewaybaby 4 года назад

@@josephjohn7209 IDK...I’ve gone to 1200 (bored as hell with the clogged resin sandpaper) and then polished with the stuff I always used for gold and silver...but it’s STILL not right! Will go back, yet AGAIN and see what’s up! I didn’t want to go higher on the grit, but.... AND, still have to find out why my castings look watery on the inside. They are perfectly cured, just not crystal clear!

@HaruhiDancer4Ever 4 года назад

@@freewaybaby That honestly sounds like a curing issue. Perhaps you havent been mixing your resin long enough to clear it of streaks?

@nblxcollections 3 года назад

Thanks so much for sharing this😊 What’s the name of the liquid you’re using?

@CestlAbby 3 года назад

Same q!

@samanthao5874 2 года назад

This video is useless without knowing if that’s water or what

@souravbhowmick8549 2 года назад

Thats water. The abrasive papers are also known as 'water paper'.

@CassidyAnimator 2 года назад

@@souravbhowmick8549 are you 100% sure that’s water?

@loneforest6541 3 года назад

Thanks for details

@SHANEDAWSONFAN497 4 года назад

this video was extremely helpful i just castes a resin sphere thats clear on the top half and black and red on the bottom i iust wanted to know if i could do this same process on the bottom half of my sphere where its colored? or is thos only for clear epoxy?

@robotsam 4 года назад

Hi me again, what about small part scratch or damage, have to use sandpaper for whole part or can only do damage part, tkx

@BuzzingFish 4 года назад

If the scratches are not very serious, you can use sandpaper with 5000-10000 grit to polish it. If you don't need overall sanding, you can also use tape to cover areas that don't need to be sanded. 😊

@robotsam 4 года назад

@@BuzzingFish thanks for your advise, i am not really understood that what kind of tape you mentioned

@BuzzingFish 4 года назад

You can search for "packing tape" in amazon, it's ordinary tape.

@robotsam 4 года назад

@@BuzzingFish wow, ordinary transparent tape cover it, it is too convenience, tkx

@Claudia-pr8bc 3 года назад

hi, not sure if you can help me since it’s a year after this video- but when I tried to polish my coaster, it was still foggy? Is there a way to fix this by chance?

@hazeldavies6167 2 года назад

I'm quite new to resin work but I find that if it needs a sanding I then add a thin coat of resin and it goes shiny again when it dries. No way would I spend all that time sanding!

@she_sings_delightful_things 2 года назад

SO FKKN COOL!!

@kalania14 3 года назад

Awesome. I need to go find me some fine grit sandpaper.

@priyankatyagi580 3 года назад

Hi..is this water u are pouring on sand paper?

@BuzzingFish 3 года назад

Yes, I use water when polishing

@rosaoranday8918 3 года назад

Was thinking the same thing. Thank you for asking

@rabindrabarnwal8082 2 года назад

What liquid have you used on the sand paper?

@mihaisamaila7646 Год назад

Plain water should do, but when I used to polish headlights by hand, I used 3-4 drops of dish washing fluid for a 500ml bowl of water, mix it with my hand and "wash" my surface and sandpaper with it. This slows down the process a little, but it gives you more control and you feel the rough spots faster, because it glides different and the difference is more obvious than with plain water.

@m.moghaddam8783 5 лет назад

Great👍👍👍 Thanks⚘☺

@BuzzingFish 5 лет назад

Thank you 😘

@rinkuarora8805 2 месяца назад

Result bahut acha aya but video dekhne k baad Sand paper ki dukan bhi kholni pdegi 😃😃

@kaitlynnd3221 4 года назад

Hello:) I’m just getting into resin I actually haven’t even made my first thing yet.. so I was just wondering what sanding it down does & why I would need to do so. Also is that water u keep pouring on?

@BuzzingFish 4 года назад

Yes, if the sandpaper is mixed with water, it will make your work smoother and will not damage your work due to the temperature rise. 😉

@krishnamathy 4 года назад

What is the polish that must be used ..or can we use wax polish as what we use to polish metals?

@pieceaisa5046 4 года назад

what polish do you use?? please answer thank you!

@BuzzingFish 4 года назад

I use a diamond polishing paste. You can use car polishing paste, it is easy to buy. 😊

@sufifiberglass 4 года назад

Mantap hasilnya...

@ohlacoquette 4 года назад

Merci pour le partage. 👌🏽🙏🏽 je partage aussi 😉

@ethanclark85 3 года назад

Each time they bring out another sandpaper grit it’s like a punchline

@TheGirlnice95 4 года назад

0:58 is that water?

@dimdimdu54 4 года назад

Yes, it's better to use water for sanding with epoxy !

@Showmake 3 года назад

这个只能定制不能批量生产吧？

@TheGirlnice95 3 года назад

Victor Lu yes, sure 🤪🧐

@lisamorales3914 4 года назад

Thank you. I needed this information.

@UnwrappingByMimiKoteng 4 года назад

Amazing

@BuzzingFish 4 года назад

Thank you.

@kaiminamoto 4 года назад

Does sanding multiple times make the piece thinner? I want to do this on my resin keycaps but I'm scared it might make it smaller. 😂

@BuzzingFish 4 года назад

Yes, it will become thinner after many times of polishing, but don't worry, it won't be so easy to grind. 😊

@kaiminamoto 4 года назад

@@BuzzingFish Thank you! I'll give it a try. 😁

@youtubeaccount0x073 4 года назад

Kai Minamoto your making resin keycaps too. How did polishing it work? What was your step by step process which grit to which grit, etc?

@kaiminamoto 4 года назад

@@youtubeaccount0x073 Hi! I decided not to sand it too much 'coz it will make the keycap smaller. I used the 1000 grit just to make it a little smoother then brushed it with some sealant to make it glossy.

@youtubeaccount0x073 4 года назад

Kai Minamoto nice!

@eddielozada3694 4 года назад

Good video. This also can be done with a small sanding machine, like an orbital to speed up the process, that being said, sometimes when things are done by hands they give you another level of satisfaction. A humble suggestion: Please try to get the camera no so close to the work. If you want to do a close up make it really slow so the viewer dont get dizzy and can appreciate the detail or read the words on the items. Please keep making these videos, excellent job. Thanks.

@reyannacorf71 2 года назад

You can just slow down the video speed in the settings, i would be annoyed if they were doing this from further away because it would be harder to see what the process is

@bernadettemurray8321 4 года назад

Hi I love your video I can get the wet paper from my local store but how long do you sand for each piece of paper please any help

@huggableearth9832 11 месяцев назад

Thank you so much

@anbsoccer38 4 года назад

I wonder what happens if you skip some grits, like do every other grit, so instead of having to sandpaper 10 times you can do it 5 times and it still ends up polished 🧐 😬

@BuzzingFish 4 года назад

If you skip some grit, your work may not be too smooth and will have some scratches. 😉

@margaretperry2015 3 года назад

That seems like a lot of work for a coaster. Especially when I can get a beautiful result but sa ding off the edges then doing a flood coat of resin.

@heenamehta1028 2 года назад

True

@BlendedBeautyXO 3 года назад

Is there a way to do this with more intricate designs? I have a skull design that got cloudy on me

@eileenzm0911 4 года назад

What were the colourful things inside of the resin? They looked super cute. Also thanks for the detailed video, I loved how it shows the full process unlike other videos that just skip through steps.