Here's The Fastest Way to Scrap a Copper Motor!

Подписаться 20 тыс.

Просмотров 1,2 млн

50% 1

In this video I show the fastest way I know how to scrap a copper motor.
Can you earn $100 an hour scrapping? I believe with the right methods and the right scrap, It's more than possible.
At the time of recording this video with the average scrap prices, I recovered $18.56 in copper and another $4 from all the other materials and I did this all in around 10 minutes.
Here is a video showing 4 different ways to scrap copper transformers.
• How to Scrap Transformers
If you enjoyed this video please like/share/leave a comment. If you would like to learn more about scrapping please consider subscribing to my channel. You can use this link here and it will take you directly to my channel homepage where you can click the subscribe button and check out my other videos. / @scrapitall200
Hi, my name is James and I'm a hobby scrapper who loves taking things apart to separate the various metal to make some extra money!
In my video I hope to show you how to scrap things, I also hope to show you the fun in scrapping different items that we all can find easily.
Come join me on my scrapping adventures where I share how I scrap items for easy money.
Please have a look at my scrapping videos and I hope you'll consider subscribing to my channel.
If you'd like to mail me anything you can email at scrapitall878@gmail.com and I'll give you my mailing address.
Thank you for stopping by and God bless y'all.
Become a member for less than a dollar a month. Your financial support will go to shop supplies, tools and anything else I need to scrap metals and make these videos.
I thank you very much for all of your support!
/ @scrapitall200
#makingmoney #hobby #copper #brass #motor #scrapping #fun #money #junk #scrapmetal #recycle #steel #aluminum #wire #scrapper #howto

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,7 тыс.

@scrapitall200 11 месяцев назад

I greatly apologize for not including the values of the metals, I was fairly new to making videos and I failed at this video 😂 I’m sorry! The copper came out to $18.56 and the rest of the materials came out around $4 and I scrapped that motor in about 10 minutes. Thank you for watching!

@MotherRussiaisforever 10 месяцев назад

Well, I would have bought that faulty motor from you for 15 dollars, so did it worth doing all that job for extra few dollars?? And also you will have to take it to the shop to sell it so the amount of time plus travel will bring down your profit to 15 dollars thus if you would sell this kind of motors to someone like me without doing a minute job on it for 15 dollars is much better however, I live in UK so need to open my business in USA I suppose...

@scrapitall200 10 месяцев назад

@@MotherRussiaisforever I had a lot of fun scrapping that motor and to me, I can’t put a price on fun. Thank you for watching.

@MotherRussiaisforever 10 месяцев назад

@@scrapitall200 OK I do understand that too, I Cut TREES and grass in my forests houses in eastren EU and I feel like i just made a billion Euroes so yes I do understand that...

@scrapitall200 10 месяцев назад

@@MotherRussiaisforever nice! Which part of Europe?

@MotherRussiaisforever 10 месяцев назад

@@scrapitall200 Lithuania

@1Subcooling 29 дней назад

This gentleman is the "Bob Ross" of the scrap world. Excellent tips and ideas.

@muddyriverdogz 29 дней назад

Ouch ! Hit my hand with the sledge. Tear smile. Just happy mistakes.

@scrapitall200 29 дней назад

Thank you, that’s a wonderful compliment

@scrapitall200 29 дней назад

🤣

@WhatDoify Год назад

I don't know what is more impressive: the scrap value or the absolute unit of a machete.

@scrapitall200 Год назад

I’m going to say the machete lol. Thank you for watching.

@Horzzo 5 месяцев назад

Holy hell, I thought it was a joke when he put it on the motor but then he sliced through it like a watermelon. WOW

@gregrussell7704 7 месяцев назад

I feel the same way about scrapping. The most frustrating yet rewarding and relaxing hobby.

@scrapitall200 7 месяцев назад

Absolutely! Thank you for watching.

@diamondmetalworks13 9 месяцев назад

Dang. I wish I could have showed this to my Grandpa. He was scrapping motors into 93. He never cut them in half and he would cut off the “curled” part and made drifts to pound out the inside part. Your way is so much faster and easy. Thank you for sharing.

@scrapitall200 9 месяцев назад

Wow that’s really cool! Thank you for watching.

@__Ryan_ 5 месяцев назад

Just subscribed. I’m an electrician/ life safety technician and I have scrapped copper wire and motors for 20 years. Mostly wire because it’s just really easy. I don’t strip the #12 THHN but I take the jacket off romex and 14-2 FLRP wire. The 500 MCM I always strip because it’s easy and worth the extra money at the scrap yard. Cool video man. Have a good weekend.

@scrapitall200 5 месяцев назад

Thank you so much for subscribing, I appreciate that. I still haven’t found any 500 mcm, but that stuff looks sweet to strip. Thank you again and have a great day!

@santosakowski9846 8 месяцев назад

That was a genius way to cut the motor in half! So simple and yet, I would have never thought of that! When I saw that machete, I thought: "NO WAY!" It worked great.

@scrapitall200 8 месяцев назад

It works so good! Thank you for watching, I appreciate it.

@johnafagerquist8235 Год назад

I've got about 25 motors, from 1/4 hp to 10 hp, but I don't have a machete. I'm going to look for a substitute, post haste! That was the fastest motor process I've seen. Thank you for the video. I'm not dreading processing the motors any more!

@scrapitall200 Год назад

I love my machete so much and by cutting the stator in half, it also makes it easier to pull the copper out. Thank you for watching.

@PhantomOfThePsy-Opera Год назад

Lawn mower blade

@johnafagerquist8235 Год назад

@@PhantomOfThePsy-Opera Great idea! I have a million of them hanging around. 👍

@electric8668 11 месяцев назад

Harbor Freight has plenty of machetes.

@MadLadCustoms 11 месяцев назад

Use an SDS with a chisel attachment, hammer off the ends with it and you'll be able to pull out the copper as well!

@coryj1811 Год назад

Much appreciated for adjusting the volume when you used the grinder. That's a rare thing but never goes unnoticed. 👏 I don't have a machete but I do have the blade from a push mower I scrapped out.

@scrapitall200 Год назад

You are very welcome, I know it can be really loud, especially for those wearing earbuds. I’ve been thinking about trying a mower blade, been looking for the right one to try. Thank you for watching and for your comment.

@Amy_McFarland Год назад

I like the mower blade idea but you may find that the metal is too thick to go through. The plates are pretty tight with little to no give to accommodate the thickness of the mower blade.

@coryj1811 Год назад

@Amy_McFarland the thickness wasn't really a problem, aslong as it's sharpened before use each time. The issue I did run into though is the slight curve it has. So it never went down straight/even which was a pain in the butt. But now I have "the proper" tools for the job so I don't have to struggle... as much 😂

@simonjones7785 Год назад

quick tip for you from a fellow scrapper with electric motors if you find something brushless / aka digital motors /aka induction drive motors often found in dyson cleaners power wheelchairs/ mobility scooters as well these motors are double wound twice as much copper as a normal motor

@scrapitall200 Год назад

I have found some of those and they can be great. I appreciate your comment and for watching.

@raulsanchez8307 3 месяца назад

Thanx for the tip!!!

@2000sborton 5 месяцев назад

I have never seen that trick with the machete before. It truly surprised me. I didn't realize that the metal was that soft. Thank you for teaching this old dog a new trick.

@scrapitall200 5 месяцев назад

I was really surprised the first time myself, it works so well. Thank you for watching

@davidmay2294 5 месяцев назад

@@scrapitall200so what type of metal is it that you split with machete?

@scrapitall200 5 месяцев назад

@@davidmay2294 it’s copper!

@davidmay2294 5 месяцев назад

@@scrapitall200 I ment the silver outer metal holding the copper windings. Lead? Or really copper?

@scrapitall200 5 месяцев назад

@@davidmay2294 those are layers of steel holding all the copper together. So the machete goes in between the layers so it’s just copper that’s getting cut.

@rodolfocamacho5258 Год назад

I love the method you break down the motor. I'm going to buy a machete, large vice and large screwdriver. I've started my Hobby of scrapping cause it really is fun for me. Taking apart anything that has copper is very therapeutic for myself. Thank you for all your amazing videos my friend and thank you for praying my friend. Keep pushing your videos cause here you have a Christian friend. God bless my friend.

@scrapitall200 Год назад

Thank you so much, your comment means a lot to me! Thank you and God bless you too, my new friend!

@rodolfocamacho5258 Год назад

@scrapitall200 always brother.

@scrapitall200 Год назад

@@rodolfocamacho5258 so happy to have you here!

@elitecystuning 11 месяцев назад

U won’t make nothing now adays Scrapping used to be the easy lazy way to make big money but not no more ..

@igorpotocnik7231 11 месяцев назад

Here in Europe the only people who have fun scrapping metals (especially copper) are the gypsies. And btw they are quite outspoken christians.

@LSD209 Месяц назад

I highly appreciate the narration! Thank You! The videos without narration makes it so I have to watch every second and then I am unable to multitask... So again, Thank You!

@scrapitall200 Месяц назад

You’re welcome! I appreciate the feedback, it’s very helpful.

@thehappyscrappy5681 5 месяцев назад

In all my years I’ve scrapped never seen it done with a machete that’s awesome must try it .. god bless and thank you for the videos

@scrapitall200 5 месяцев назад

It’s such an awesome way to do it. Works on transformers too. God bless and thank you for watching.

@thehappyscrappy5681 5 месяцев назад

@@scrapitall200 was ganna say would work awesome on transformers to def ganna have to try it cos I normally do the cut one end and bash the copper through and that’s noisy takes for ever and you get worn out quick where this looks actually quite fun.. I am only fairly new to your channel but I have followed and will continue to watch

@scrapitall200 5 месяцев назад

Thank you, I appreciate it. A hatchet also works really well on transformers.

@Oldgrumpyvet67 5 месяцев назад

I was struggling to get a motor opened earlier then I remembered this method and it worked it was slicker than snot on marble lol thank you I hope you had an awesome day today 😊

@scrapitall200 5 месяцев назад

That is so awesome, thank you for sharing this. Thank you, you too my friend.

@Horsecatcher 23 дня назад

I just took apart an air conditioner and the copper didn't want to come out. It was packed so tight I had to take apart the housing 4 layers at a time. I got a decent amount of copper, but it took too much time. Nice video brother

@scrapitall200 23 дня назад

@@Horsecatcher that’s frustrating when that happens. They dip a lot of motors in shellac then cure them in an oven and that makes everything stick to together. Fortunately a lot of motors aren’t like that. I’m hoping soon to make a video on how to deal with those frustrating motors. Thank you so much brother.

@nightscrapperuk13 Год назад

That was a brilliant break down from start to finish and very well explained my scrapping friend, you got a good amount of copper from that moter god bless my friend

@scrapitall200 Год назад

I was really happy with how much copper I recovered. Thanks for watching my friend and God bless you too!

@bonnieclyde3615 11 месяцев назад

I used to find tons of those motors on roofs all the time back when I was cleaning grease exhaust systems. I always took them home with me to scrap but I was never able to get the copper windings out like you did. I found 1 one time that was on a hospital roof that weighed probably 50 lbs. Needless to say that was good payday. Lol And before anyone says i was stealing them, I wasn't. They were all bad and left behind by lazy contractors that didn't want to carry a heavy motor down a ladder after they replaced them. So they left them there. Thanks for the helpful content. Just subscribed bc of your prayer. All glory to our loving God! Amen

@scrapitall200 11 месяцев назад

I believe you, lots of people can’t be bothered carrying those heavy motors and they just abandon them. Thank you so much and God bless you! God is great!

@dustinmurray7080 7 месяцев назад

Instead of cutting the windings in half, then pulling them out, I find it easier to cut the loops on one end with a set of bolt cutters, then pry them out the other end. Works better on some than others, the ones with a ton of shalliac seem to be a little more finicky.

@scrapitall200 7 месяцев назад

Interesting method, I’ll have to get a pair a bolt cutters and give that a try. Thank you for watching.

@bobobulinski7121 6 месяцев назад

That’s a pretty slick way to quickly get those opened up! Will definitely be doing them this way from now on.

@scrapitall200 6 месяцев назад

Awesome! It really does work great. On transformers too. Thank you for watching.

@justaservant-5888 11 месяцев назад

Never took one apart that easy but always willing to learn.ill get back with the results

@scrapitall200 11 месяцев назад

Definitely let me know how it went for you. Thank you for watching.

@kircolebangz509 9 месяцев назад

My machete literally split in half length wise after about 10 min of giving it some much needed forplay with a 3lb hand sledge

@scrapitall200 9 месяцев назад

@@kircolebangz509 wow! That’s the first time I’ve heard of that happening! Was it already damaged? New or older?

@aznative_ 7 месяцев назад

@@kircolebangz509harbor freight?

@mattyal9347 Год назад

By far this is the most efficient way to extract the copper windings from a stator. There is no wire dust to sweep up. In fact. Debris is a minimal.

@scrapitall200 Год назад

Thank you! I definitely don’t like all the dust, and plus no breathing in that dangerous dust. Thank you for watching.

@Reconcile-h4g Год назад

I like your attitude towards scraping it's a fun way to make some spare money from home , and the good Lord opens up all these avenues for us to do so.

@scrapitall200 Год назад

Amen to that! Thank you for watching and God bless you!

@bradkroboth5490 8 месяцев назад

I haul scrap part time and do my teardown work at night, little side hustle to cover some expenses and learn how different things operate, I'd rather makle $$ while relaxing instead of passing it up, microscrapping saves $$ by not driving around looking for items but maximizing your return per each

@scrapperbrad Год назад

I just bought a machete for cutting open electric motors and transformers based on your videos. Thanks for posting another great video!

@scrapitall200 Год назад

Awesome bud, let me know how it works for you! Thank you, I appreciate it.

@shazuurakrixxis2036 11 месяцев назад

He is the Bob Ross of scraping, lol

@scrapitall200 11 месяцев назад

I think you’re the second one to tell me that lol Thank you for watching

@lowpulse8729 8 месяцев назад

Get yer ‘fro in order and some bob ross background music

@RailfanRowan 11 месяцев назад

Dude, this is my first video of yours!! Looking into doing this myself. Thanks for the prayer at the end, brother! In Jesus' name, AMEN!

@scrapitall200 11 месяцев назад

Amen! Thank you so much for watching, I appreciate it. God bless you, brother!

@willpanter209 11 месяцев назад

You can tell it’s your first time doing this😂 very efficient. Appreciate the video and inside to speed up my work thank you !!!

@scrapitall200 11 месяцев назад

You’re welcome and thank you for watching

@Supercheeseburger666 9 месяцев назад

You're lucky the copper came out that easy. I've scrapped motors where there was so much lacquer that I had to soak it in Vinegar to loosen it up a bit before using a prybar! Thanks for sharing.

@scrapitall200 9 месяцев назад

I think having it in two pieces help, but I know what you mean, I’ve had some that were a real bear. I’ve never heard of soaking them in vinegar before, I’ll have have to give that a try, thanks!

@mwanttruth4602 10 месяцев назад

I like when you thank God for what you do i m in metal fabrication for 43 years and i thank God too for everything i accomplish i wouldn t do it without him

@scrapitall200 10 месяцев назад

Amen to that! God bless you and thank you for watching!

@benhumphregys3087 6 месяцев назад

Amen in the name of Jesus Christ 🙏🙏🙏🙏❤️❤️❤️❤️

@amgeezy_2709 6 месяцев назад

I find annoying and pitifully sad

@kevansmotherman1201 4 месяца назад

Shared myths are everywhere!

@jjdajune 4 месяца назад

God damn it, these cult people I tell ya. Yikes!!!

@jayjaynella4539 Год назад

I enjoyed this and learn something new after doing this for 40 years.

@scrapitall200 Год назад

That’s great! Thank you so much for watching.

@9957nite 11 дней назад

Tried doing this for a living 30 years ago had a deal with a local scrap yard they furnished the motors and i tore them down and they paid me for the copper and i gave them back the rest didnt really work out for me even with an unlimited supply of motors to scrap course copper didnt pay as well 30 years ago and the scrap yard owner always found a way to down grade the copper so he paid me less all in all the experience was less than enjoyable for me :)

@scrapitall200 11 дней назад

@@9957nite that doesn’t sound like an enjoyable experience for sure.

@anthonycolangeli4133 9 месяцев назад

I totally agree with you. I use the machete method and it seems other scrappers have picked up on your method. I do not like all that dust from the copper when using an angle grinder among other things. God Bless!

@scrapitall200 9 месяцев назад

Me too my friend, I really don’t like that dust all over everything, plus it’s really dangerous to breathe in. Yeah I’ve been amazed at how popular the machete has become. Thank you for watching and God bless you too!

@gregz4249 9 месяцев назад

Could you fashion a machete out of old lawn mower blade?

@scrapitall200 9 месяцев назад

@@gregz4249 yes, I’ve heard of others doing that. I haven’t made one myself yet.

@gizmo5586 Год назад

This is one of the first jobs I ever had . We didn't scrap ! We rewound ! Cheaper than buying a new one !

@gizmo5586 Год назад

Even an easier way !

@scrapitall200 Год назад

I’ve seen some videos of that being done and it’s pretty cool. Thank you for watching.

@weaponizedmath4369 7 месяцев назад

Just did a 1st one myself and certainly did the hard way, thanks for the info

@scrapitall200 7 месяцев назад

Thank you for watching. Hope it works well for you.

@Bamamike223 11 месяцев назад

Holy Scrap! I now have a new hobby. Thank you.

@scrapitall200 11 месяцев назад

It’s a great hobby and I love it. Thank you so much for watching.

@EternallyThankful-os6pz 11 дней назад

Clicked for the scrapping advice...as I enjoy scrapping work as well...subscribed since you're my brother in the Lord !!

@scrapitall200 11 дней назад

Amen! God bless you and thank you so much.

@Saltyzero1295 Год назад

Thank you very much for the shout out! God bless!

@scrapitall200 Год назад

You’re welcome buddy and God bless you too!

@HussainKamran-u8c 3 дня назад

Job welldone😊😊

@scrapitall200 3 дня назад

Thank you 😃

@joserosado8633 Год назад

I like your Contant very educational and professional. Thank you for sharing with us. Stay blessed.

@scrapitall200 Год назад

Thank you very much, I appreciate that a lot! Thank you for watching and God bless you.

@Bizarreparade 10 месяцев назад

Thanks for leaving the prayer in the video. Sincerely. Machete! I can't believe I never thought of that. I use a machete for everything. Im a small scale farmer and my wife can attest to the fact that I usually have a machete in my hand and a couple dogs in tow. When we hike trails in the state park I carry my machete🤣. I use one in the garden to coppice or to harvest vegetables. I use it to slice those vegetables when Im feeding them to the pigs or other livestock. I find a hundred other uses all the time. Its basically my 5 in 1. So before my little love letter to machetes gets even weirder I'll just say thanks for the great idea!

@scrapitall200 9 месяцев назад

😂 I enjoyed reading about your love of your machete. It’s an awesome tool. I’m so happy you enjoyed the prayer, God bless! Thank you for watching.

@ihaulscrap Год назад

WOOOW, that is cool. I've been just tossing motors bc they are usually too hard n time consuming. Definitely going to try this.

@scrapitall200 Год назад

The machete really does make it quick, plus no mess from copper dust from the angle grinder. $22 for all metal and it took me 10 minutes to scrap. Thank you so much for watching.

@derekhaywood1844 Год назад

Sir ; you are awesome. Give God his praise. I love it. Thank you so much for the video. You are a great man.

@scrapitall200 Год назад

You are welcome and God bless you! God is great and I’m nothing without Him! Thank you for watching.

@ryanreynolds8597 8 месяцев назад

Let me teach you a way to do that a whole lot faster man. I personally was a lead connector on stator motors for several years. That string you see, it's called lace string. Take a razor and go around the motor cutting all of it. Now itll basically just fall off now. Once thats out of the way, here's the main trick. You see the little white pieces that're coming out of it that look like plastic strips? They're mylar strips, used to keep the winding from.grounding out on the frame. So if you stand the motor up and look down in it, they will be somenwhat U shaped if you will. Now get s pair of needle nose pliers and grab the end of one and pull up. They'll come right out. Itll take a second , but once you get the hang of it, it'll go quick. Once theyre all out,just push the wire towards the center and it'll come right out. Once yohve done one or two, you'll be able to have everybit of thebwire ojt in about 30 seconds start to finish.

@scrapitall200 8 месяцев назад

Ok so I understand every you’ve said and I’m going to give that a try, but what about the ones that have a lot of extra lacquer or glue poured all over them? Seems to me that those insulator sleeves get stuck from all the glue. Thank you so much I appreciate it.

@ryanreynolds8597 8 месяцев назад

There shouldn't be extra on them. They're laced, and then ran through what they called a dip and spin, which is where that's applied. I've always known of them all being the same. Now granted, a different company might do that part differently. But hopefully it'll help you out.

@scrapitall200 8 месяцев назад

@@ryanreynolds8597 I’ve had some that look like they dipped them like 10 times 😂😂 But I will give your method a try because I believe you and I’d love to make things easier for myself. Thanks again, I really do appreciate it.

@ipaddlemyowncanoe.7441 13 дней назад

I do it the same way. Once I get that it all apart. I take a propane torch and just run it around and it melts all the cat gut as I call it. They're wrapping on top of that and then when I was watching somebody else I got a piece of 2-in flat stock quarter inch thick about 16 in Long and I cut an inverted v in the end and it really makes it easy to get the copper out. You can pry it out or hit it with a hammer on the end and it pulls the copper out. Either way, try different ways. Good video!.👍👍🙂🇨🇦

@scrapitall200 13 дней назад

I’ve seen that before, and I definitely need to make myself one. Thank you!

@paulmitchell2857 10 месяцев назад

Amen. I love that you give thanks to God. It's very refreshing to see on RU-vid. Thank you

@scrapitall200 10 месяцев назад

You’re welcome! I’m so happy you enjoyed the prayer. Thank you for watching!

@gsmith128251 2 дня назад

Thats a good idea to split the laminations and cut the coils in half, I'm going to try and take it a step further and make a plate with a sharp edge and try to split it with my hydraulic press.

@scrapitall200 2 дня назад

@@gsmith128251 that’s a great idea, I bet that will work. Thank you for watching.

@steveherr450 Год назад

I do it almost the same way. Instead of an angle grinder I use my plasma cutter to open the casing. Then I use similar pliers usually 1 of my 2 bigger ones and instead of using the screwdriver I just flip my pliers upside down after getting it loose and roll the plier neck on the steel edge for leverage or on the vice sticking the one end under the copper like you did the screwdriver and out pops the copper usually pretty easy. Doesn't pop out then I grab my bigger pliers. my yard wants the strings removed too.

@scrapitall200 Год назад

I should try using my pliers just like you described, thank you for the tip! Thank you for watching and leaving a comment, I appreciate it.

@richardchee2454 3 месяца назад

God bless you. Love your video. ❤ What a joyful scrapper you are!

@scrapitall200 3 месяца назад

Thank you so much. God bless you and thank you for watching, I appreciate it.

@rossbrumby1957 11 месяцев назад

On behalf of 90% of the people of earth, thanks for taking the time to add the metric weights. It's nice to finally see a copper scrapper who, after all the effort of doing a video and setting up a channel, actually has a vice mounted on a bench! I've seen videos where they have no vice, have one sitting on the floor not bolted to anything, and one with a vice bolted to a short piece of 9" diameter tree trunk sitting on the shed floor! They just can't be bothered setting things up to make work easy. Your machete seems to work, but I dunno about bashing the back side of it- the wrong tool for the job normally gets mangled. I just cut one end off with the 1mm thin disc and pin punch it out as I don't frequently get motors. Planning a pnuematic claw puller after seeing a homemade hydraulic puller that strips motors of wire in 15 seconds.

@scrapitall200 11 месяцев назад

I don’t understand either why some don’t properly mount their vise. I’ve been using the machete for quite some time and it’s holding up really well. I like it because my shop is a shelter logic tent and I don’t use the angle grinder inside of fear the hot metal dust or sparks will put holes in my tent. I also like it, because when the stator is in two pieces the copper comes out much easier, especially with the ones that are incredibly tight. That would be a really cool thing to have, I’ve seen videos of those and they are sweet. Thank you for watching. P.S. in my newer videos I add more information for users of the metric system along with the values of the metals in Euros, British pounds, Canadian dollars and Australian dollars.

@rossbrumby1957 7 месяцев назад

@@scrapitall200I finally got around to trying a nice sharp bench axe on a longer stator- it cut through easy enough, but the copper wedged into the gaps and was a bugger to punch out. It may also have been an especially tight wound motor too though. I dont own a machete or would've tried that- i realise the axe being thicker may not give as good a cut.

@scrapitall200 7 месяцев назад

@@rossbrumby1957 I tried a hatchet on a stator and had the same experience. I’m thinking it’s the thickness and not as sharp as a machete that makes that happen. That’s a bummer it didn’t work for you.

@DarrenFinley 5 дней назад

Thanks for the video!🙋‍♂️

@scrapitall200 5 дней назад

@@DarrenFinley thank you for watching 😁

@nachostuff Год назад

That was great yield. I have seen more like 9% average and you were getting closer to 15%. Way to go

@scrapitall200 Год назад

I think this one was the best one yet I’ve done! Came from my local grocery store from one of the refrigerant systems, I think. Thanks for stopping by buddy.

@BWOUTDOORS 19 часов назад

GOOD JOB

@scrapitall200 19 часов назад

@@BWOUTDOORS thank you!

@jrb6969 5 месяцев назад

Agreed! The machete was impressive and a really great time saving tip. I ha e one I found buried and now I know exactly what to do with it! Again, impressive friend!😮

@scrapitall200 5 месяцев назад

Thank you! First time I tried the machete I was quite surprised at how well it works. Thank you for watching, I appreciate it.

@scrappingonthefly77 Год назад

Nice teardown!! Great tutorial. Thanks for sharing!!

@scrapitall200 Год назад

Thank you buddy, thanks for stopping by and giving a watch.

@scrappingonthefly77 Год назад

@@scrapitall200 always!!

@CuriousEarthMan 5 месяцев назад

Thank you for the wonderful video! What is the casing of the stator made of? What does it 'go for', metal grade if it is metal? Is all the rest scrappable? Does it go for tin, with the cast AL going for cast AL of course? Do you have to pull the plastic out of the stator casing? Thanks again! You did a really great job, and made it so simple!

@scrapitall200 5 месяцев назад

You’re welcome! The casing is steel and will go as light iron The stator itself at most scrap yards should go as #1 steel also known as prepared steel. It’s best to make sure what your yard buys it as, since every yard sort of does things differently. You shouldn’t have to remove the plastic. Everything can be sold as scrap. This was one of my original videos and I didn’t do the best job at explaining all of that, I apologize. Thank you for watching.

@off-gridsurvivalmike8120 Год назад

Wow that was amazing how you chopped that motor in half with a machete. I actually thought you were joking at first. I have worked with metal for 40 years and would never have thought of that wild idea. Great video new subscriber here.

@scrapitall200 Год назад

Thank you, I was amazed myself when I first gave it a try. Thank you for watching and subscribing. I just subbed to your channel.

@Bob_Loblaw Год назад

@scrapitall200 what a lovely exchange. 😊

@scrapitall200 Год назад

@@Bob_Loblaw thank you! Thank you for watching.

@PNWGarden-ci8dg Год назад

I thought the same thing. Great video!! This is inspiring

@scrapitall200 Год назад

@@PNWGarden-ci8dg glad you enjoyed it. Thank you for watching.

@thomaswil8 10 месяцев назад

There is a company that i know of that is makes money hand over foot that makes money buying only scrap metal and making it into ornate metal fence. I used to scrap until I found out the TV parts I was scraping for pennies actually have value in the hundreds. All those boards and backlights are worth way more than any scrap yard will pay. One DLP chip from Mitsubishi was selling for $400 a piece at the time. I was selling 5 a week on Amazon and ebay

@scrapitall200 10 месяцев назад

I bet those fences are really cool! Yeah there is definitely money to be made selling components like that. I’d love to find a few of those DLP chips lol. Thank you for watching.

@thomaswil8 10 месяцев назад

@@scrapitall200 they go for 50 to 200 today, but like anywhere between 2012 and 2020 yeah it was wild.

@scrapitall200 10 месяцев назад

@@thomaswil8 that’s still pretty good money!

@LeviWalton-b8g Год назад

I work for a university campus and they have motors that range from 5lbs - 500lb+ let alone all the other metals and Cooper piping etc. I think most of the time they just trash it all.

@scrapitall200 Год назад

500 pounds!! Wow! You should ask them if you can have them. Thank you for watching.

@user-yl6yy2yj3n 7 месяцев назад

Thats a new and improved method for me Thanks 😊

@scrapitall200 7 месяцев назад

You’re welcome. I love the machete method. I think I’ve done 20 of them so far and also lots of small transformers. Thank you for watching.

@brandt-heiss Год назад

Wow, so much copper in that little motor. Nice one... Even to cut it with a Machete is so fast. I didnt believe that. Hope i can get one here in my country. So on, keep scrapping. Bye and greetings from Germany brandt-heiss

@scrapitall200 Год назад

I was very pleased with the amount and yes, the machete works wonders. Thank you for watching all the way from Germany!

@darvinreed2314 Год назад

I owned a scrap yard back in the 80s the good Ole air chisel was my best friend

@scrapitall200 Год назад

Absolutely! I’d use one if I had one lol Thank you for watching.

@countrysidelife5768 Год назад

I just wanted to say thank you too 🙏 You just earned a new subscriber!!! First time that I saw the knife slice method and I loved it AWESOME 👏 Fast💨 Clean 🧽 Easy 😊

@scrapitall200 Год назад

Thank you so very much, I really appreciate it! God bless you!

@BushDogScrapper Год назад

That machete of yours is some tough it went though that faster the grinding the cap pretty much with like you say no copper dust wasted! CheeRs ScrapItAll ♻️🤘🏻

@scrapitall200 Год назад

I love my machete. Yeah I hate the dust, plus it’s dangerous to breathe in. Thanks for watching my friend!

@bearspiritjpz 9 месяцев назад

i loved your closing prayer!

@scrapitall200 9 месяцев назад

Oh good! Thank you for watching and God bless you!

@albertgallegos9938 Год назад

Loved the prayer!!! ❤❤❤🙏🙏🙏✝️✝️✝️

@scrapitall200 Год назад

Awesome! God bless you and thank you so much for watching.

@power1961able 8 месяцев назад

These are helpful ideas

@scrapitall200 8 месяцев назад

Awesome! Thank you for watching.

@RS-ls7mm Год назад

Yes, convert an apparently clean motor worth at least $200 into $18 worth of metal. Brilliant plan.

@scrapitall200 Год назад

You really think it still worked?

@RS-ls7mm Год назад

@@scrapitall200 No, but I have seen enough repair videos and fixed enough of my own to know its generally pretty easy.

@scrapitall200 Год назад

I don’t disagree with that but I live in a small town and no one wanted it even for free so scrap it is.

@steveherr450 Год назад

@@scrapitall200 I agree I get more in than I can resell so most get cut up.

@scrapitall200 Год назад

@@steveherr450 I find it hard to resell items, so many want to lowball on the price and the frustration and time is usually not worth it, but too each their own, right?

@johnharrison2466 8 месяцев назад

My pakistani friends scrap a motor the same way,very quick and efficient,thanks for the video

@scrapitall200 8 месяцев назад

That’s so cool! Thank you for watching.

@joseleyva7578 2 месяца назад

Wow I was surprised at how the machete cut thru real easy. I have 5 of these I'm about to cut them open. I was going to used my grinder but I'm not machetes time😂. Thank God I ran into your channel. Shout out from Brownsville Texas u got a new subscriber.

@scrapitall200 2 месяца назад

It really does work great and with transformer too. Thank you very much. God bless you and Texas!

@Followerofchrist878 11 месяцев назад

Wow, that was cool using the machete

@scrapitall200 11 месяцев назад

It works so well. No dusty mess and super quick.

@Followerofchrist878 11 месяцев назад

I agree!

@Followerofchrist878 11 месяцев назад

@@scrapitall200thank you for the video. God bless you

@scrapitall200 11 месяцев назад

You’re welcome. Thank you for watching. God bless you too.

@Followerofchrist878 9 месяцев назад

Hope you had a Merry Christmas!

@jimmoravec1326 5 месяцев назад

Excellent video, Especially thanking Jesus 👍

@scrapitall200 5 месяцев назад

Thank you so much. I love Jesus with all my heart and I’m nothing without Him. God bless!

@ohiograssman1564 Год назад

I used to cut up and break down every piece of hvac equipment- furnaces etc. Fun times

@scrapitall200 Год назад

I sure do have fun scrapping. Thank you for watching.

@ScrapMan69 Год назад

great video my friend always good to tear them big motor compressor apart to get all that copper!!

@scrapitall200 Год назад

Thank you! Yeah I love these big motors, so much good copper! Thanks for stopping by.

@ScrapMan69 Год назад

@@scrapitall200 your welcome buddy hope you have a good day!

@scrapitall200 Год назад

Thank you and you too have a wonderful day!

@AndrewOglesby 7 месяцев назад

Question: Would it, or could the motor cooperate a little bit easier coming apart if’n it was Warmed up, by chance?

@scrapitall200 7 месяцев назад

It’s possible I suppose, might be worth trying.

@dalemills8052 Год назад

That motor is as clean as a new one...makes for good "clean" copper too. Great informative video and God bless you.

@scrapitall200 Год назад

Thank you buddy, I appreciate it. God bless you too!

@dyer2cycle 11 месяцев назад

Yes, good clean copper, but still #2 copper, not #1, because it is so "fine"..most yards use the diameter or a pencil lead as the cutoff diameter between #1 and #2 copper..so, the shiny doesn't really help you.

@JW212manhattan Год назад

You make that look so easy

@scrapitall200 Год назад

It’s not hard at all, but I have done a lot of motors lol. Thank you for watching.

@jeffpowell2864 Год назад

Motor could have been rebuilt and sold for a lot more money. Most time all that's wrong is a stuck or worn out brushes. If it spins freely, has continuity in the fields, with no shorts to the housing = good sellable motor for the price of a pair of brushes

@scrapitall200 Год назад

I’ll keep that in mind, thanks.

@AndersAylward Год назад

People always say this stuff as if there's always people wanting to buy an old motor out there

@scrapitall200 Год назад

@@AndersAylward in my area motors are being offered for free and no one takes them. I’d rather have fun scrapping a motor than try and find that one person willing to buy it.

@jeffpowell2864 Год назад

@@scrapitall200 not criticizing the scrapping. The point being person having broken motor repaired instead of replacing it. The original equipment needed a moter like this.

@johneckert1365 Год назад

As a salvage yard owner, it also bothers me when good stuff gets destroyed.

@safetyharborfirearms 9 месяцев назад

Never thought of chopping it apart like you did

@scrapitall200 9 месяцев назад

Works really well. Thank you for watching.

@ShahKhan-hi7gr Год назад

Nice video good ❤🎉

@scrapitall200 Год назад

Thank you buddy!

@vanman724 Год назад

Great use of the machete! Works perfect.

@scrapitall200 Год назад

It sure does! Thank you for watching

@stevenbryant9097 Год назад

I've been a dumpster diver/ scrapper for over 33 years and I've broken down exactly 113 motors exactly like this one and I can tell you that they have never weighed 6 pounds. 2 to 5 pounds maybe 😮.

@scrapitall200 Год назад

I’ve had quite a few that were right around 6 pounds of copper, guess I’ve just been lucky. Thank you for watching.

@BigBuckGetter 11 месяцев назад

You saw the scales. Are you saying he's a liar??

@stevenbryant9097 11 месяцев назад

@@BigBuckGetter yup

@shanghunter7697 11 месяцев назад

@@stevenbryant9097 You've been hating and angry for many decades now ! I have 41 yrs experience and his weight WAS right on. STOP the hating and jealousy, stop using those two wasted emotions ! Now the real anger WILL show.......GO !!

@EelingStudios 6 месяцев назад

Great! I learnt something there as I would have used an angle grinder where you used the machete that made perfect sense! Keep up the good work 🙂

@scrapitall200 6 месяцев назад

I love using the machete, works so well, plus no mess from copper dust lol. Thank you for watching.

@JohnJoe-pf8of 11 месяцев назад

Great video

@scrapitall200 11 месяцев назад

Thank you so much

@JohnJoe-pf8of 11 месяцев назад

You're welcome

@DouglasBowers-cd8iz 8 месяцев назад

In Texas that clean fan motor wire ghost for about $3 show 3 * 6 get split a couple of them to make $100 . But that was a damn good guess on the weight 😜.....

@scrapitall200 8 месяцев назад

Some places are getting close to $4 a pound. Thank you for watching.

@davea5150 Год назад

A question for you. I often wonder when I get stand alone floor fans and also pedestal fans. Some of the casings are cast aluminum and some steel . I usually sell them as is. Do you think it's worth taking the copper windings out? Thank you 👍👍

@scrapitall200 Год назад

Those ones are really easy but in my experience they are mostly aluminum windings instead of copper. Thank you for watching.

@robertordewald8678 Год назад

You had some good ideas, Thanks new subscriber, Bob from Virginia USA

@scrapitall200 Год назад

Thank you, Bob, I appreciate that!

@Followerofchrist878 6 месяцев назад

Watched again. That machete is really nice!

@scrapitall200 6 месяцев назад

Thank you! It really is!

@Followerofchrist878 6 месяцев назад

@@scrapitall200you’re welcome!

@chaseanonymous9327 10 месяцев назад

Great video! The prayer at the end was awesome

@scrapitall200 10 месяцев назад

Thank you so much! I’m happy you enjoyed the prayer. God bless!

@Zappy1210 Год назад

Gave it a try on a 60hp motor a few years ago. Man has to know his limitations 😂. Spent a full Saturday getting the copper out, was about 65 lbs. So roughly $200 for a full days work, very hard work. Its a shame it isn't easier because I have access to about twenty or so 30hp to 350hp motors a year.

@scrapitall200 Год назад

Those huge motors are definitely a lot tougher but for me as a hobby scrapper, it’s definitely worth it. Wish I had a few 350hp motors lol. Thank you for watching.

@MsSugercrisp Год назад

@@scrapitall200 $27 Dollar worth of copper you got for that one motor now I say it took you about ahhh 45 min to 1 hour to do all that work then you need to bring to scrap yard that will take you other say 30 min so you need to bring a lot just pay for time and say so in a day if you had 8 that come up to $216.00 now $16 will for new took and gas and lunch so you make 200.00 a day now that all good the only problem you need endless motor now that had part and to be that kind of motor or better was fun to watch you do that was the motor any good? because it would be worth way more then $27 I say about used $60 or double that $120 new

@Breadbored. 11 месяцев назад

@@MsSugercrispThat's something scappers overlook all the time. I've seen so much perfectly good stuff get chopped up and sold for scrap at 1/10 the price they could have gotten for it. People will even buy broken stuff if it's repairable or if you can repair it yourself, even better.

@allenrusselljr 11 месяцев назад

@@Breadbored.I owned a small engine shop for 12 years and made friends with a dozen scrappers. I said anything with a gas engine I'll take for more than scrap. The equipment they found blew my mind. Old Dr brush hogs , snowblowers , rare horizontal engines from the 70s. It was an amazing business relationship. Thanks to covid and a bad business partner with addiction issues I had to close. I definitely miss it, it's an in demand dying industry. The amount of money you can make in April and may alone is unbelievable. (That's just from mowers, mainly old riders)

@Breadbored. 11 месяцев назад

@@allenrusselljr My favorite time of year. I used to love driving around with my father looking for treasure. One time I got a $2000 commercial laser printer on my way home from work. Nothing wrong with it at all, it just needed a new toner cartridge. God bless the rich people that don't know what anything is worth, lol.

@Carey-d8u 3 месяца назад

Yes Thank you for this day

@scrapitall200 3 месяца назад

@@Carey-d8u thank you so much for watching!

@ScorpionMetals Год назад

Great video

@scrapitall200 Год назад

Thanks bud

@fritzbender5050 11 месяцев назад

The Bob Ross of scrapping thanks!

@scrapitall200 11 месяцев назад

Thank you, I appreciate that!

@jakeqwaninne8502 8 месяцев назад

WOW ! I can't believe you cut through that with amachetti and a maul, incredible ,i'm gonnatry that method on all kinds a shit

@scrapitall200 8 месяцев назад

It works so well. I’m still using the same machete and it’s still going strong. Thank you for watching.

@ScrappingIrish Год назад

well done sir nice teardown, must remember never to pee you off after seeing your machete lol, nearly 3kg of copper lot better than i taught

@scrapitall200 Год назад

Thank you buddy, I appreciate it. Well thankfully I’m a peaceful guy 😂 It was better than I thought, was so much fun scrapping. Thanks for watching, I appreciate it.

@nickcoudounellis9668 Год назад

Here in Australia scrap copper is $12 per kilo. Electric motors are 60 cents per kilo. Niw that i know how to get the copoer from a motor i will give it a try. And here i was selling electric motors fir 60 cents a kilo. I love scrapoing. Its like a hobby to me especially now that im retired. Thanks for sharing. I learnt a lot from watching

@scrapitall200 Год назад

Awesome, I’m happy my video has helped. I love scrapping too, it’s such a fun hobby Thank you for watching

@MissCanadian Год назад

Nice chunk of copper in that motor

@scrapitall200 Год назад

Wish I had a hundred of them lol. Thanks for stopping by friend.

@MissCanadian Год назад

@@scrapitall200 I have couple that size and bigger

@scrapitall200 Год назад

@@MissCanadian that is awesome! And with your prices that’ll be a good payday.

@greghood659 3 месяца назад

What i did on one of these is, I cut the top ribbon of copper with my angle grinder. That allows you to pull the strand up through the shoot. I didn't have to cut the battery in half

@BahaaFahmy-ch2lg 4 месяца назад

A thumbs up for thanking God

@scrapitall200 4 месяца назад

Amen! Thank you for watching and God bless.

@Followerofchrist878 4 месяца назад

Amen!

@scrapitall200 4 месяца назад

God bless you both!

@davidhaughton961 11 месяцев назад

HI there! I subscribed because I like your prayer. God bless you.

@scrapitall200 11 месяцев назад

Thank you so much! That’s really wonderful and God bless you too!

@zerocool7772 Год назад

Great video, mate. Good to see your machete is still going strong. I recently watched a great video on a channel called VisconVee and he uses a plough blade cut into the shape of an axe blade with a slight bevel on the edge, worked a treat.

@scrapitall200 Год назад

Thank you so much! Oh wow, that’s cool. I’ll have to check out that channel, thank you.