How to Screen Print: What is Plastisol Ink?

Подписаться 106 тыс.

Просмотров 145 тыс.

50% 1

In this video Ryan Moor talks about what plastisol ink is, what the ink has done for screen printing and briefly explains how the ink is used.
RELATED PRODUCTS:
View our Plastisol Inks Here: goo.gl/KvmmuL
View our Water Based Inks Here: goo.gl/fNmwJM
View Wilflex Epic Lava Perfect White LB Plastisol Ink Here: goo.gl/YjACrT
View Wilflex Epic Curable Reducer Here: goo.gl/Db26jo
View the Eco-Friendly Sgreen Green Chemicals Here: goo.gl/jrZba5
SUBSCRIBE: scrnprntl.ink/R...
CONNECT WITH RYONET
Website: www.screenprin...
CONNECT ON SOCIAL
Facebook: / ryonet
Twitter: / ryonet
Instagram: / ryonet
Pinterest: / ryonet
LinkedIn: / ryonet
PROMO CODE
Save 20% on any order of $25+ when you use code YOUPRINT5 at checkout. Start shopping today: scrnprntl.ink/...
ABOUT SCREENPRINTING.COM
ScreenPrinting.com is where printers can conveniently find their favorite high-quality brands of equipment and supplies, such as Riley Hopkins, FN-INK, Baselayr, & Sgreen. Screen Printers can also earn points from each and every purchase through ScreenPrinting.com to be used for future orders of equipment and supplies. Enough about us... this is about you, you ready to get printing?

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 123

@Ryonet 10 лет назад

Harrison there is a heat gun, that you could use, but its not consistent. There also flash dryer that work great for small operations.

@wizardtech1 10 лет назад

Thanks for the information, My hoodie ink was cracking when I stretched it, I didn't know it was all about the heat treating. Now I know better and that's the power of youtube. :)

@Ryonet 11 лет назад

When printing plastisol ink (ink shown in this video) no you don't need to clean your screen after usage however, If you're printing water based or solvent inks yes you'll need to keep the ink moving!

@oblark 6 лет назад

Hey ryan thanks for all the informative videos you've made they've been a huge help. I'm looking for a particular video, the one where you printed a picture of a moon using white ink on a dark shirt. Thanks!

@Ryonet 11 лет назад

We sure do!

@iprintneat9013 9 лет назад

I love this guy nice professional presentation! Learning a lot from you Thank you!

@Ryonet 9 лет назад

+Gloria Marino Thanks for watching, always nice to hear the videos are helpful! We post new videos every week, please subscribe and enjoy :)

@iprintneat9013 9 лет назад

+Ryonet Bryan Done! subscribed Thank you so much you are the best screen printing teachers.

@iprintneat9013 9 лет назад

+Gloria Marino Ryan?

@Ryonet 11 лет назад

Always!

@Ryonet 11 лет назад

Good on you!

@Toche 11 лет назад

another great video Ryan !!! Thanks a lot !

@YouDontNeedMuch 4 года назад

Thank you very much. Very informative.

@Ryonet 11 лет назад

Thank you!

@thatguyfromca 4 года назад

what's the best size screen to use. I'm talking about the hole size on the screen.

@lecudig92 6 лет назад

what kind of ink should I use to print on vinyl fabrics,for instance, motorcycle seats

@Ryonet 11 лет назад

Typically waterbased ink will prove to be the longest lasting ink. I would also never suggest using solvent based ink to print t-shirts.

@birdsness1834 9 лет назад

gudday sir for this video can ask something about mesh it is a 100 or 150..thank you sir ..

@Ryonet 11 лет назад

That's hard to say. I don't think that would work because plastisol doesn't bind well to plastic.

@boyscout_86 8 лет назад

Hey now I'm a bit confused... I originally thought plastisol was the best but then found out water base is what truly gives that very soft feel now this.... Im looking to do very soft hand prints what would you guys advise?

@Ryonet 8 лет назад

If you are looking for soft hand prints, water based inks and discharge is the way to go. Plastisol can achieve a softER hand but it will never be as soft as water based :)

@Ryonet 11 лет назад

Yes we do :) email zthorp@ryonet.com for international inquiries. Thank you!

@Ryonet 11 лет назад

Unfortunately you can't. It's too thick.

@legendof7 10 лет назад

Great video man, very informative

@Ryonet 10 лет назад

Thanks, glad you liked it!

@brendalynnr3514 10 лет назад

Hi Ryan! Great video. I was hoping you could give me some advice. I want to actually Paint on fabric, but I am looking for an extremely opaque ink or paint--with a result like the plastisol. Do you have any suggestions?

@Ryonet 10 лет назад

Plastisol mixed with 10% curable reducer would work well. www.screenprinting.com/ic-curable-reducer-in-squeeze-bottle-8oz.html#.UwKwS6WuJGg

@brendalynnr3514 10 лет назад

Thank you for such a fast response! Have a great night.

@harryml6354 10 лет назад

Also, is there an alternative to the heat press? (iron/two irons/three irons haha)

@LouisFindlay 10 лет назад

What shirts do you print on? And would you say plastisol ink is the best to print with?

@Ryonet 10 лет назад

BRAKEPK I like printing on ring spun shirts.

@benrojas4736 4 года назад

I'm trying to color panels on volleyballs. Is there an ink you'd recommend for this application?

@Ryonet 4 года назад

Solvent ink!

@daytondean9181 11 лет назад

question? If I'm not going to get a job done that night, do I have to clean the ink out of the screen, and re-apply it the next day?

@brucec1626 7 лет назад

id love to go all water based but how do you get around it drying in the screen on long runs, aside from keeping a spray bottle handy?

@Ryonet 7 лет назад

Hey there! Keeping a spray bottle around is definitely a good idea. If you think your ink is starting to dry out, you can give it a few spritzes to wet it down again. Another strong suggestion we always make is to keep your screen flooded if you are not actively printing. If you step away, or stop to do something, then backflood your screen (as if you were about to do a print). The distribution of the ink can keep it from drying as well.

@ddalgi_wooyu 8 лет назад

If I use a heat gun, how long does it usually take for the plastisol ink to cure? And how would I know if it's cured already by the heat gun?

@Ryonet 7 лет назад

Alongside the heat gun, you will want a laser temp thermometer so you can follow your flow of heat. This ensures every section of the print is fully cured. timing will vary based on the type and thickness of the ink, but so long as your temp reading is good, you're set. Once you get consistent with your curing, you can go more based on time, but getting there you will want to make sure your temp is accurate to avoid assuming (and possibly washing out/cracking).

@christinetenbroeck3977 6 лет назад

We heart at 230 + degrees Fahrenheit in our dryer for 60 seconds

@Elevationprint 6 лет назад

What is the link with Ryonet and CustomInk?? I know this is from 2013, but I am curious.

@Ryonet 6 лет назад

Hey there, this was from some years ago. It was likely just a test print for them.

@feargalb7913 8 лет назад

What would be the best beginner setup for screen printing? I'm on a real budget so can't afford things like flash driers and have been looking into making my own screens and printing press.

@Ryonet 8 лет назад

+FergieTheSeagull awesome questions and its great to see gulls like yourself getting into the print game! I would tell you to start with a DIY kit and see how screen printing fits into your life. A heat gun is all you need to be curing a few shirts at a time (or more if you are brave) so no need to worry about a flash dryer until you're sure its the right craft/business for you! Check out some of our DIY Kits for ideas. I recommend the poster kit since its the same as the basic but comes with a larger screen and pallet :) www.screenprinting.com/cat/starter-and-diy-screen-printing-kits

@aracelihernandez6848 7 лет назад

in regards to the heat gun, do you have any tips as far as curing and flash times? I just purchased a heat gun and a IR Thermometer, but im not sure how the thermometer works in checking that the shirt is completely cured ( i know we use it to see if the shirt has reached the 320 degrees necessary to properly cure a shirt). any videos or tips when using a heat gun on plastisol shirts?

@hodsonnyproducts1726 11 лет назад

Hi I have a question Water based ,solvent and plastisol inks which one is best? which ink is hard to wash out had print on the T-shirt ? when we daily washing the garments? thanks

@svendsaustrup6879 9 лет назад

Hi Interesting and very informative video !! I wonder, though, why it seems almost everywhere I look on the internet, that silk screen printing is only for textile printing (T-shirts). I'm going to print front plates for electronics on aluminum plates - which ink would you recommend ?? And which emulsion ??

@Ryonet 9 лет назад

Svend Saustrup You would want to use either an Enamel Ink or Epoxy ink for this process, these are both airdry inks and a bit more aggressive.

@josev1717 8 лет назад

Hi what was the solvent we need to clean plastisol ink and where can i get it?

@Ryonet 8 лет назад

Hey there here is a great plastisol cleaner: www.screenprinting.com/sgreen-supreme-wash-qt

@Ryonet 11 лет назад

We sell ink! Click the link in the description and you'll be able to buy all the ink you ever wanted!

@ifjamjan5445 8 лет назад

which ink shud v use in screen printing to print plastic bags or bags with polythene covering so that ink does not smuj

@Ryonet 8 лет назад

+Ifjam Jan great question! You will normally use solvent inks to print on about anything plastic. Check out some solvent inks here: www.inkcups.com/

@bestprint4817 7 лет назад

how much durometer of rubber for plastisol ink?

@Ryonet 7 лет назад

Hey there! We suggest using a 70 durometer squeegee for most printing needs!

@xiaowen7 9 лет назад

hi Ryonet , I printed plastisol ink on my shirt and I flashed it,the ink became so hard than the waterbase ink.is that normally?

@Ryonet 9 лет назад

xiaowen7 Probably not, it may have been flashed for too long

@xiaowen7 9 лет назад

okay,thx ur reply.i will try out again.

@RedSolitude 11 лет назад

do you guys take paypal?

@hoodangel7198 6 лет назад

Exactly how much does all the stuff you used in this video Cost like the whole machinery and everything

@mixacase5913 11 лет назад

I have a print direct to substrate printer, but I would like to print on black color plastic, do you think this product that I can use as white base, so my printer can then print on it? So it must be adhesive to plastic surface. Thank you.

@caivsivlivs 7 лет назад

do the graphics feel all hard on these shirts? like feels bad to wear on hot days?

@Ryonet 7 лет назад

Only if a thick print is made! Using higher mesh screens and reducing your ink are two ways to make it feel MUCH better on the shirt. Water based feels nice most of the time too :)

@fabianarodriguez1191 8 лет назад

for how long you flash the screen to cure the plastisol?

@Ryonet 8 лет назад

Normally this takes about 20-40 seconds but it is dependant on each and every print. You will want to use a temp gun to check the temperature of your ink as you flash it. Take note of the time it takes to fully cure and ensure the prints are as consistent as possible (in thickness/pressure). You should be dialing in your times in no time :)

@EasyOutlawskateshop 8 лет назад

How well does simple green clean a screen?

@Ryonet 8 лет назад

+Brian Taylor For best results, we recommend using a product specifically formulated for degreasing screens. Sgreen Degreaser is a great choice: www.screenprinting.com/sgreen-degreaser-qt

@EasyOutlawskateshop 8 лет назад

+Ryonet alright thanks, also what would you recommend for white and black plastisol inks for a 156 screen?

@Ryonet 8 лет назад

+Brian Taylor For black, check out Black Matter from Green Galaxy! It needs to be stirred well before use but is a beautiful ink! It's a plastisol ink that has the softer feel of water base. For white I would recommend the same line, Meteor White. Here are links to both: Black Matter - www.screenprinting.com/black-matter-plastisol-ink-quart and Meteor White - www.screenprinting.com/meteor-white-ink-quart

@cre8tivemediadesignfirm711 2 года назад

Loved this

@Two1live 7 лет назад

Does this ink have a rubber feel after it dries?

@Ryonet 7 лет назад

Hey there! This ink will have a thicker feel to it, yes. Plastisol inks form a layer on top of the shirt, and this can often have a rubber like feeling to it. There are ways to make the print flatter, and thus softer, such as heat pressing after you've cured the shirt. If you are looking for an ink that gives a much softer feel to it, then you would want to try water base inks!

@tonypspokertable2728 6 лет назад

I had purchased your ink about 5 years ago, would the shelf life be expired by now, it is almost thick like glue

@NightThinker12 6 лет назад

Sir what mesh count is advisable for plastisol ink? Thank you in advance

@NightThinker12 6 лет назад

@Courtney Stake thank you very much!

@harryml6354 10 лет назад

Hi, Does this work for Riso paper and silk screens? Many thanks,

@jordanh17 9 лет назад

Hi, nice prints. What T are they, i see on your screen it says 110, is that 43T or 110T thanks

@Ryonet 9 лет назад

Jordan Howard 110 mesh which is 110 threads per inch

@ant5747 6 лет назад

does anyone know if off contact is necessary to print neatly ? I don't have a press, so off contact could be an option if I make something to prevent it from constantly touching the fabric.

@megajpomery753 6 лет назад

Hey bro I like you ,but can I get a chance to our company from kenya

@migzzism1 10 лет назад

so what is the most commonly used, i mean what kind of paint usually used

@Ryonet 10 лет назад

There's no paint in screen printing only ink. So the most commonly used ink would be plastisol ink :)

@nalluxD 9 лет назад

sorry if I'm asking a silly question but what is rubber ink? Is it the same or similar to plastisol ink because a printing shop in my town does both but charges cheaper for the rubber ink process..

@Ryonet 9 лет назад

Cheng We don't know much about rubber ink unfortunately.

@nalluxD 9 лет назад

Ryonet Well that's a bummer..thanks for replying nontheless

@neelascreens1620 10 лет назад

very great videos,

@nancyeaguiar 5 лет назад

I’m trying to decide if I want to buy plastisol or water based inks. I have two questions: can plastisol be ironed on for it to cure? (I don’t have the equipment shown in the video, but I do have an iron) and once cured, does it feel stiff, plastic-like? Thank you for the video!

@Ryonet 5 лет назад

You likely won't be able to hit the high temps necessary to cure plastisol inks with an iron. For plastisol transfers we would recommend a heat press. You'll be able to feel it and will get a softer hand feel if you use waterbase!

@MasterBlaster305 11 лет назад

just did a job of 200 black tees with white inc omg drive me crazy

@purithemwadee9608 7 лет назад

What about rubber base ink. Doesn't it creates a bright color as much or even more than plastisol?

@Ryonet 7 лет назад

Rubber based inks can have great, bright colors! However, they're not for textile printing.

@zarakikenpachi1773 4 года назад

Hey, is it possible to cure plastisol ink using a heat gun? I am doing this as a hobby and not a business.

@Ryonet 4 года назад

You can! Just make sure to perform wash tests to ensure that the ink has completely cured. You can learn more here: www.screenprinting.com/blogs/news/ensuring-proper-ink-curing

@TanvirAhmedBhuiyan 9 лет назад

Nice

@HiramJuarbe 11 лет назад

Modulation

@orlayagg8387 2 года назад

Ryonet.. can I have your contact please, for business purposes

@Kput71 10 лет назад

Can you print gradients using plastisol?

@Ryonet 10 лет назад

Yes indeed. You just a well exposed high mesh screen.

@tulsihatbazar3965 4 года назад

Gradient

@peklat6934 4 года назад

Can I use a heat gun rather than a flash dryer?

@Ryonet 4 года назад

Yes you can. It just takes much longer. So if you're doing production printing, we don't recommend it.

@peklat6934 4 года назад

Thanks!!!

@r.in.shibuya 10 лет назад

What mesh count do you like to use with plastisol inks?

@Ryonet 10 лет назад

Depends on the ink color and design. support.silkscreeningsupplies.com/entries/20451617-What-Is-Mesh-Thread-Count-

@r.in.shibuya 10 лет назад

Ryonet I'll assume 110 for white... Would it be the same for a high opacity neon plastiol that you sell?

@Ryonet 10 лет назад

Most neon inks aren't High Opacity, you usually need an underbase, but 110 or 156 should be fine.

@shaakira.m5788 6 лет назад

What is the size of mesh

@ant5747 6 лет назад

He wrote it on the side of the screen. It is 110. The higher the mesh count, the more detailed of an image you can get

@UnstoppableNick69 4 года назад

Dang it, I thought plastisol is used only to make soft lures.

@balajicomputer4082 6 лет назад

It's Washble

@Younglouspiff 7 лет назад

What is 110 HiFi? .. Specifically the HiFi Part

@salamasoud 10 лет назад

i have some question is it okay to ask you here ?

@Ryonet 10 лет назад

Sure, I will do my best to help you.

@salamasoud 10 лет назад

Hello i saw your video and i really like the quality of your work and i was wondering do you do printing work for ppl from oversee ? im from kuwait so im waiting for ur answer ohh i have use pox and i can buy by paypal

@Ryonet 10 лет назад

We don't screen print commercially. We only sell the equipment and supplies.

@salamasoud 10 лет назад

Ryonet ohh well that a pity if do i think your work will be amazing thank you for reply