How to Secure into HOLLOW BRICK using RAMSET Ultra Fix | DIY

Подписаться 37 тыс.

Просмотров 29 тыс.

50% 1

This week I’m showing how to secure into Hollow Brick using the Ramset Ultra Fix kit. For the longest time I have had issues with the hose wanting to fall off the wall because the supplied wall plugs that came with the hoselink. Over time the plugs supplied with the Hoselink would crack and then start to come out of the wall. The biggest problem I ran into is I knew I had to use the Chemset Chemical to secure into the hollow brick but the nuts that come with the install set wouldn’t fit in the hoselink bracket. I then came across these nuts called couple nuts. They are longer and screw onto the bolts and give me enough perch to use a socket wrench to tighten the bracket on. Below are some helpful links if you're looking to tackle a project like this in the future.
Ramset Ultra fix: bit.ly/2SfkOs7
Ramset Sieve: bit.ly/3wvmn4b
Ramset Bolts: bit.ly/3hJVt4a
Ramset Cleaning Brush: bit.ly/344qqYL\
Coupler Nuts: bit.ly/3bLcurc
This video will take you through step by step of the build from start to install.
0:00 - Intro
0:14 - Intro to Ramset Ultra Fix
1:44 - Wall Anchors
3:37 - Install of Chemical
5:03 - Coupler Nuts
6:27 - Wrap Up
---------------------------------------------------------
Happy building and if you like to stay up to date with what I'm currently working on be sure to follow me on social.
Facebook: / smallfrycreationsanddiy
Instagram: goo.gl/bWWnQe
Etsy: www.etsy.com/au/shop/SmallFry...
_______________________________________________
Amazon Affiliate Links for Tools and Gear I use
AUSTRALIA:
Tools
- Makita Brushless Drill Driver: amzn.to/3u7x1NJ
- Makita Impact Driver: amzn.to/3nzXTU2
- Bosch Jigsaw: amzn.to/3t4JAI8
- Ryobi Palm Router: amzn.to/3aLHEOz
- Kreg Pocket Hole Jig: amzn.to/3e0Y5si
- Clamps: amzn.to/3vq5VRW
- Triton Router: amzn.to/3gPyoNh
- Glue: amzn.to/3t6iiRy
Camera Gear
- Canon EOS R: amzn.to/3uvfqiV
- Canon 15-35mm Lens: amzn.to/33wHc2p
- Manfrotto Tripod: amzn.to/33ny1l9
- Manfrotto Ball Head: amzn.to/3etRK96
- Manfrotto Movie Head: amzn.to/3o2BaA7
- Rode Lav Mic: amzn.to/2Ryzwu7
- Rode Mic Receivers: amzn.to/3etn9rY
- Voice Over Mic: amzn.to/3nVRIdd
USA
- Makita Miter Saw: amzn.to/3u7L1XB
- Makita Brushless Drill Driver: amzn.to/333eWEG
- Makita Impact Driver: amzn.to/3u7LdGj
- Bosch Jigsaw: amzn.to/3eFvVlP
- Ryobi Palm Router: amzn.to/3e6T0Pj
- Kreg Pocket Hole Jig: amzn.to/3t2Yij2
- Clamps: amzn.to/3gQwlZd
- Glue: amzn.to/3t7zuX3
Camera Gear
- Canon EOS R: amzn.to/3ham36l
- Canon 15mm-35mm Lens: amzn.to/3eVittW
- Manfrotto Tripod: amzn.to/3xVsxMp
- Manfrotto Ball Head: amzn.to/3bbhyot
- Manfrotto Movie Head: amzn.to/3f66Pwq
- Rode Lav Mic: amzn.to/2RxYSZ4
- Rode Mic Receivers: amzn.to/33rFnUK
- Voice Over Mic: amzn.to/2RB5Pbw
FTC Legal Disclaimer - Some links found in the description box of my videos may be affiliate links, meaning I will make commission on sales you make through my link. This is at no extra cost to you to use my links/codes, it's just one more way to support me and my channel! :)
------------------------------
MUSIC:
Track: Freedom - tubebackr [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Freedom - tubebackr | ...
Free Download / Stream: alplus.io/freedomm
------------------------------

Хобби

Опубликовано:

17 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@inspiringbuilds 3 года назад

Good job finding a solution for hollow brick mounting. Keep up the great work as the goal is for us to continue to inspire others to build something awesome! 👍🏼

@SmallFryCreations 3 года назад

Thank you very much. Loving the process and being apart of the community.

@mackgamer3136 Год назад

the best diy ive seen so far!!

@SmallFryCreations Год назад

Thank you

@SujMenon 3 года назад

Great idea. I never thought of using those chemical resins as anchors, but have seen others using them. Great tip, Ainslee!

@SmallFryCreations 3 года назад

Thank you. Yes it worked very well. I think anywhere your holding up a lot of weight its a good option. Thank you for the support :)

@MichaelJeffrey 6 месяцев назад

Just put up my hose link... Oh man, so glad you've made all these tips. A standard M8 nut would've been impossible. Those couplers did the trick! Love ya work!!

@SmallFryCreations 6 месяцев назад

That’s awesome!!! Glad I could help 😎

@MarksElectricLife Месяц назад

Very useful info! Thanks so much for sharing! I’m going to Bunnings now to get the things I need to install my new hose reel properly.

@SmallFryCreations Месяц назад

Awesome. Glad I could help.

@Timothy-NH 3 года назад

I've used couplers a few times when there has not been a way to get a socket in there; such a great solution.

@SmallFryCreations 3 года назад

Yeah they are. I never knew about them but so glad I found them!!

@jasont2074 2 года назад

Awesome video, planning to mount a basketball ring to a bricked wall. This solution really helped. Thanks a lot 🤙🏻

@SmallFryCreations 2 года назад

Hey awesome. Yes perfect solution 😎

@dscott2542 Год назад

Great video there!! Thanks for sharing 😊

@SmallFryCreations Год назад

Thank you 😀

@erykfreethinker7147 3 года назад

Thank you Ainslee for a first class exposition of this fixing method and the coupler solution. My old fashioned approach to the inset bolt problem has been to hacksaw a slot across both sides of the nut and make a corresponding cut-out in a bit of mild steel to make a kind of screwdriver, tighened with a wrench. Dinosaur stuff nowadays! :) Your presentation is excellent by the way, fast moving, clear, crisp narration and 100 percent confidence, you could produce ripper teaching aids. I learned the word _'ripper'_ from Dirk! :) The house I used to live in was made of stone outside and brick inside but there was no damp course as it was built in the 1880's. The bricks under the plasterwork could be in any state from soft and fragile to engineering diamond hard! I had to innovate to get anything to be stable - and there was nothing straight or at rightangles in the house! I have not heard of hollow brick over here in the UK. In the 1960's a lot of hollow "Breeze Blocks" were used but mainly inside dwellings. Thank you for a really well made video Ainslee. 👍👍👍🛠📌🔨👌

@SmallFryCreations 3 года назад

Hi Eryk Love that Dirk taught you Ripper. Its a great word :) Oh Gosh I could only imagine the issues dealing with nothing straight and stone. Such a challenge. I think the hollow bricks in Australia as a cost saving way to build and because we don't have extremely temperatures they work well. The checmial is working out well with the hose not a chance of going anywhere now. Thank you for the support and kind words.

@erykfreethinker7147 3 года назад

@@SmallFryCreations Thank you Ainslee for the _grouse_ response . . Dirk taught me that word too! :) Have a super day! 😊

@cameronlittlewood1553 Год назад

Thank you so much for this video. I had this exact problem (except my hose reel fell out immediately after installation using the supplied plugs). I did exactly what you have done and it is solid as!

@SmallFryCreations Год назад

Thats fantastic. Glad to hear its working for others as well. So much better then the plugs that come with it. :)

@pdavidson33 7 месяцев назад

My Hoselink hosereel just fell out a week after I installed it! This video helped me fix it.

@user-oy4gf6ck5u 3 года назад

Nice advice, cool job as always !!!!!!!!!!!!!!!

@SmallFryCreations 3 года назад

Thank you Katepina 😀 much appreciated

@sumosprojects 3 года назад

Super helpful, Ramset are quality based products & I’ve used there products for plaster wall anchors that are awesome 🇦🇺🍺🍻👍👍👍

@SmallFryCreations 3 года назад

Hey thanks Dirk. Yes I’m a fan of Ramset. They make some really great products and I’m glad I have solved the problem a d hopefully can help others along the way 😀

@BuiltByChris 3 года назад

“Common senserly “ 🤨😂 I’ve used this stuff before and it’s fantastic. Lots of great tips and a job well done. 👍👍

@SmallFryCreations 3 года назад

😂😂 thanks Chris. I was impressed with how strong it was and just so glad I solved the issue. It has plunged me for so long. Good to have it off the list 😀

@pdavidson33 7 месяцев назад

This was really helpful, thank you

@SmallFryCreations 7 месяцев назад

Glad it was helpful!

@metalmick99 Год назад

What a wonderful clip! Well-presented, informative and so very timely as I've just moved into a house that has hollow bricks, and I was concerned about the nylon anchors that came with my hose reel. The previous owners seem to have got by without these products, but I'll never know because they just left the holes in the brickwork. Thanks for a great job!

@SmallFryCreations Год назад

Yahoo thats fantastic. Glad I could help. They are holding up super well and haven't moved a bit since I did the install.

@metalmick99 Год назад

@@SmallFryCreations You're welcome! And I'll find out tomorrow how well they work...or how well I install them. Just got back with a couple of sets.

@andrewmacaulay7044 6 месяцев назад

@@metalmick99 brilliant! I had the same problems. Thank you.

@CrudeButEfficient 3 года назад

That's a pretty pretty nifty solution, to basically chemically bond it to the brick. And smart move to use the couplers, gonna remember that one!

@SmallFryCreations 3 года назад

Thank you. Yeah the couplers are handy to know about. I think I will be using them in the future. The chemical is a cool solution. Worked really well and very easy to use. Thanks for the support

@gobblurrito8789 11 месяцев назад

You're an excellent teacher. Hoping they sell this stuff in the US.

@SmallFryCreations 11 месяцев назад

Thank you. Glad I could help :)

@Andrew.Stuart Год назад

Thanks for the help.

@SmallFryCreations Год назад

Happy to help

@paulrabe9606 Год назад

Brilliant- Thank you

@SmallFryCreations Год назад

Glad I could help

@paulthomas-fv2kz Год назад

Great Video.Thanks

@SmallFryCreations Год назад

Thank you 😀

@llanzafa 2 года назад

Nice work

@SmallFryCreations 2 года назад

Thanks

@bern4679 2 года назад

Thanks, that helps.

@SmallFryCreations 2 года назад

Glad it helped

@MichaelJeffrey 7 месяцев назад

You're an excellent presenter! Thanks for this solution!! 👍😊

@SmallFryCreations 7 месяцев назад

Thank you. Glad I could help

@MichaelJeffrey 7 месяцев назад

@@SmallFryCreations Thanks for the reply. I just bought all this stuff at Bunnings. Gonna put up a couple of fold up rectangular clothes lines on similar brick to yours.

@MichaelJeffrey 7 месяцев назад

@@SmallFryCreationshey, just another question unrelated, why do you have that hose reel up so high? I'm gonna purchase one next week.

@SmallFryCreations 7 месяцев назад

@MichaelJeffrey amazing!! Will work a treat for sure. 😀

@SmallFryCreations 7 месяцев назад

@@MichaelJeffrey Just makes it easier when pulling it out and its not in the way of the lawn mower of anything I'm moving through the side gate to the back yard. Its not super high. I'm 5,1 and its at my head so not crazy :)

@NathanaelCBR Год назад

Thanks for this, I was reluctant to drill a 16mm hole for an M8 threaded anchor stud but I've given up trying to find those metal mesh or smaller nylon sleeves that Ramset apparently make so I'm just going to have to do it with the multi-fit ones, thanks for the video

@NathanaelCBR Год назад

I also liked how you used the bracket to make sure all the bolts lined up nicely with the holes, and having some wiggle room in the chemical anchor helps.

@SmallFryCreations Год назад

Glad I could help. Bummer you can’t get the mesh sleeves as they work so well.

@kallan2255 Год назад

Great video. Have you considered Ramset Ankascrews though? They're rated for use in hollow bricks and blocks and don't involve any chemicals or single use nozzles. I mounted a TV with some on the weekend.

@SmallFryCreations Год назад

Hey thank you. Good idea. In my situation the holes that were already there were to big for the screws and I can't rembeber but there may have also been an issue with the head of the screw fitting through the bracket I was securing. Great option and idea through.

@FixitFingers 3 года назад

You may not do DIY videos often Ains but when you do they are crackers... well, holders in this instance. Bunnings need to get you on as an affiliate ;)

@SmallFryCreations 3 года назад

Thanks James. It would be awesome if Bunnings support Aussie makers with some think like affiliate links 😀

@barakau 2 года назад

Excellent video. I may have missed it, but how much load can this chemical application hold for a hollow brick scenario? Thanks

@SmallFryCreations 2 года назад

I can’t remember off the top of my head but they are pretty strong. It may say it on the packaging or if you had a particular project in mind I would contact Ramset’s and they could confirm the best product as they have a couple of options. It’s at least 100kg but I would say it could do more 😀 hope that helps

@guowan2743 2 года назад

👍🏻

@jasaqu6512 2 года назад

Nice. What length bolt did you use?

@SmallFryCreations 2 года назад

110mm bolts that come in the pack. Links for the bolts I used are in the video description 😀

@Gtanti2012 3 месяца назад

Hey Ains, glad I came across your video. I have a Hoselink and drilled 12mm holes which they suggest, but the hose keeps pulling out when loaded, like yours does. I may have to expand to 16mm holes. What depth holes did you drill for the anchors, if you can remember?

@SmallFryCreations 3 месяца назад

Hey glad I could help. I drilled them just deeper than the ramset sleeves. I didn’t take a particular measurement. I held the sleeve out the drill bit and marked with some tape. It fits in brick easily. Hope this helps.

@Gtanti2012 3 месяца назад

Legend! Thank you I’ll go to Bunnings and pick up the same. Will a regular caulking gun work or will I need one like you have?

@SmallFryCreations 3 месяца назад

@@Gtanti2012 no worries. Nah any caulking gun will do the job no problem. Happy installing. You won’t know yourself when it’s done. Mine has moved a millimeter since installed😀

@Gtanti2012 3 месяца назад

@@SmallFryCreations I actually don’t know how yours lasted as long as it did. I installed mine today and it’s already pulled out. Thats probably due to the 12mm holes I think whereas you drilled 10mm holes initially. I don’t know why they say 12mm holes on the installation instructions

@SmallFryCreations 3 месяца назад

I agree. I replaced mine more time than I care to admit😂. Should have done it years ago. They should have different install instructions given that I assume 99% of people are installing into hollow brick.

@listerlau7479 2 года назад

What bolt or screw did you use originally? I'm going to hang something light only

@SmallFryCreations 2 года назад

I used the stuff that came with it. They were wall plugs and screws. Great if your going into something soild bu if its hold the wall plugs don't hold very well

@AmandaGorst Год назад

Hello. May I ask what diameter are the studs/threads that you used please? Can you use 10mm? thank you in advance

@SmallFryCreations Год назад

The studs are M8 bolt size. In the video decription there are links to all the things I used which hopefully will help :)

@LondonRider12 9 месяцев назад

Really great video, thank you! It would be helpful if you didn't have the sound track running beneath your spoken track. It makes it harder for me to focus on what you're saying, and your content is interesting enough to stand on its own. ❤

@SmallFryCreations 9 месяцев назад

Thank you. Glad it was helpful. Will take on the feedback :)

@davewilliamson7030 3 месяца назад

Thank you! I had exactly the same issues with installing my Hoselink. A word of warning: using a Ramset 8 x 110mm Galvanised Anchor Stud (without the "M" before the "8") will not work with the Pinnacle M8 x 24mm Galvanised Hex Coupler due to different thread pitches - the nut will tighten up for about a turn then become progressively harder to rotate and the coupler will start to strip. Also, you need to insert the coupler, inject the UltraFix and push the bolts in one at a time as the UltraFix sets VERY quickly in warm weather. I got caught out and had to start again. More holes. 🙄

@Chris-no4yt 2 месяца назад

Where can I buy Ramset 8 x 110mm Galvanised Anchor Stud that are not M8? And using the couplers to tighten up the bracket after she inserted the studs seemed to work perfectly well to me.

@MANGOGLEN Год назад

Couldn't you just set the original bolts in the resin?

@SmallFryCreations Год назад

Unfortunately not. They are designed for the sleeves that went in the wall and you have the set the bolts with no load on it so I couldn’t use the bolts as I couldn’t install the holder until the resin had dried.