Тёмный
No video :(

How to Service a Riding Lawnmower - Spring Tune Up 

Eliminator Performance
Подписаться 101 тыс.
Просмотров 40 тыс.
50% 1

Step by Step!
In today's video, I'll be servicing a Massey Ferguson 2827 Riding Lawnmower.
Because my customer has this machine serviced every Spring, this Massey Ferguson still runs great!
The work we are performing today is called "Preventative Maintenance".
Example: A dirty Air or Fuel filter may allow dirt to go inside of the Carburetor. So changing parts such as the Air Filter & Fuel Filter regularly, will prevent the majority of dirt & debris from going into the Carburetor. This will limit the chances of needing a Carburetor Clean & Rebuild.
Work Completed;
Pre Filter: STENS 055-089 or Kohler 24 083 05 - S
Air Filter: STENS 100-758 or Kohler 24 083 03 - S
Spark Plugs: STENS 130-526 or Champion RC12YC (Gapped at 0.030")
Fuel Filter: STENS 055-113 or Kohler 24 050 13 - S1
Oil Filter: STENS 120-345 or Kohler 52 050 02 - S
1.8L 10w30 Oil
Fuel Shut-off Valve with New Fuel Line Clamps
Mower Deck Clean, Undercoat.
Triple Blade Sharpen & Balance.
Greased Mower Deck Spindles & Steering Spindles.
Inspect Deck/Belts, Check that Switches Function Properly.
Check Air Pressure in Tires.
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
DONATE:
Bitcoin: 1NYgPvcvBWuhGRewsLE4Scy1cbzwndh5hZ
SOCIAL MEDIA:
/ eliminatorperformance
/ eliminatorperf
/ eliminatorperformance
2ND CHANNEL:
EP Vlogs: / @eliminatorperformance...
GEAR:
Camera: amzn.to/2HVkW9o
Tripod: amzn.to/2HGWt4w
Microphone: amzn.to/2J7k9DA
Cheap Mic: amzn.to/2xCBn6z
Headphones: amzn.to/2JeHUG9
Editing Software: amzn.to/2JD7OTx
Photoshop: amzn.to/2HBY6Ez
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks

Опубликовано:

 

17 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 85   
@matt.hansen
@matt.hansen 4 месяца назад
Thorough, concise and even a touch of education on how a combustion engine work! I didn’t skip through a single portion because it was all so informative and well edited! You rock! If only all DIY/how-to/ tutorials were this good.
@unclerico1044
@unclerico1044 Год назад
This is a well shot and very informative video. Your customer got some good work done 👍
@tannerc900
@tannerc900 Год назад
Haha.. had to laugh when you gave the tip about hammering a screw driver through the oil filter. I bought a boat last year with a I/O engine and the oil filter was already in a super awkward/tight space and I guess the guy who last changed it didn’t wipe some oil on the gasket before he screwed it on and it was stuck solid and after busting my knuckles dripping blood everywhere from my oil wrenches slipping I accepted defeat and punched the screw driver through and boy oh boy are you right about having oil all over the place, got the job done tho!
@olderthandirt7023
@olderthandirt7023 3 года назад
Thanks mate, such a thorough explanation for each step, I'm one happy Australian to have found such a reputable mower mechanic.
@EliminatorPerformance
@EliminatorPerformance 3 года назад
Thanks for watching!
@robertduffersr1962
@robertduffersr1962 5 лет назад
Very good strong voice best teacher learned a lot to add to my 27 yr business All sweet knowledge thanks so much.
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Thanks for the kind words Robert!
@minouchat
@minouchat 5 лет назад
Jake, I want to thank you for the product information used during your maintenance work. As well as for all the little details. Good job! Merci !
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Thanks for watching!
@nj4x4fever2
@nj4x4fever2 5 лет назад
You do a fantastic job on your service. Thanks for sharing!
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Thanks for watching Dennis!
@eduardonieto2355
@eduardonieto2355 2 месяца назад
That is cool my friend. 👏👍🇺🇲
@user-nf1fw1pd2w
@user-nf1fw1pd2w 5 лет назад
Just saw your comment on Jussa xlts video. Crazy past you have had, glad your doing good buddy, actually just found a videos of yours that will come in handy. Good luck with your channel brother!
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Thanks Rylo, gotta take things one day at a time, cheers!
@waynestefinashen239
@waynestefinashen239 5 лет назад
Very good explanation of just about everything on this service and WOW gotta get me one of these, long time since i have seen a Massey not many dealers around like there use to be.
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Thanks, and yes they are very nice machines! Well built, that's for sure!
@ThroneRoomTalks
@ThroneRoomTalks 4 года назад
I have learned so much. I wish I could my lawnmower off you.
@EliminatorPerformance
@EliminatorPerformance 4 года назад
Thanks for watching!
@steved5153
@steved5153 5 лет назад
Good video. Always learn something from you. Everything is well thought out.
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
There's always a balance of good info and not making the video to long and boring. I always try my best, thanks for watching Steve!
@mp3625
@mp3625 5 лет назад
Hey thanks for the tips! Fabulous video
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Thanks for watching Dave!
@gregsoper5623
@gregsoper5623 2 года назад
Many Thanks.. Great info..
@donvoll2580
@donvoll2580 5 лет назад
Good day Boy that video was well to the point. Cover it all. The oil drain plug, like you put tape on. I'm like it, but I'm always afraid oil will come out. Thanks
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Thanks for watching Don!
@buzzwinklemoose9853
@buzzwinklemoose9853 4 года назад
Thorough, aintcha? Nice to see someone take pride in doing things right.
@EliminatorPerformance
@EliminatorPerformance 4 года назад
Thanks for watching!
@brucel.6078
@brucel.6078 5 лет назад
Great video!!! Thanks!
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Thanks for watching Bruce!
@prithvimann1539
@prithvimann1539 5 лет назад
Very detailed video. 👍👌
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Thanks for watching Octo!
@prithvimann1539
@prithvimann1539 5 лет назад
No problem! New sub by the way👍
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
@@prithvimann1539 😎👍
@prithvimann1539
@prithvimann1539 5 лет назад
Eliminator Performance thanks
@DanKesterke
@DanKesterke 4 года назад
Great video and keep up the solid work!
@EliminatorPerformance
@EliminatorPerformance 4 года назад
Thanks for watching!
@jjalmo5487
@jjalmo5487 3 года назад
Great video!
@EliminatorPerformance
@EliminatorPerformance 3 года назад
Thanks for watching!
@NatiVeTouCh
@NatiVeTouCh 5 лет назад
Nice, very informative - TY!
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Thanks for watching Chris!
@robeftyearian8760
@robeftyearian8760 5 лет назад
Man u do good work keep it up
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Thanks for watching Rob!
@nutangcollective5500
@nutangcollective5500 Год назад
Great video, i have the mf41-22 and mostly everything was similar. Just finished the oil change and run it for a few minutes but the oil light/ch6 oil is still on. Wouldn't happen to know how to reset it?
@EliminatorPerformance
@EliminatorPerformance Год назад
A maintenance reminder will display in the information window, after the first 5 hours of operation, and then after every 50 hours. The reminder should automatically reset after 5 hours, however, the reminder can be manually reset by turning the key switch from OFF to RUN (with engine off) and then depressing the set and select buttons simultaneously and holding for 5 seconds.
@grrobson1
@grrobson1 5 лет назад
Very informative thank you
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Thanks for watching George!
@jimmypopp2695
@jimmypopp2695 3 года назад
Thank you.
@EliminatorPerformance
@EliminatorPerformance 3 года назад
Thanks for watching!
@DillanKamarjian
@DillanKamarjian 4 года назад
Excellent job! If a transaxle seal has gone bad how can you tell what caused it or if there are other issues going on for it to go bad? The mower is a craftsman t2300. Thank you!
@berryngo1363
@berryngo1363 4 года назад
good tips
@EliminatorPerformance
@EliminatorPerformance 4 года назад
Thanks for watching!
@Loveinlife1980
@Loveinlife1980 3 года назад
Thank you for this detailed service summary. What fuel shut off valve did you use. I have a Kohler engine but can only find a shut off valve for a Briggs and Stratton engine. Would this be ok?
@EliminatorPerformance
@EliminatorPerformance 3 года назад
Yes this should be ok, thanks for watching!
@tvento
@tvento 5 лет назад
Nic work.
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Thanks for watching Tony!
@tvento
@tvento 5 лет назад
@@EliminatorPerformance I could use a tutorial on fuel line/primer line, and the different clamps that are user to attach them. Doing some snowblower repairs. A short video would so be appreciated. TY.
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Snowblower season is over, but I do have a couple that need some work. I'll be doing some videos on them eventually, so you'll have to stay tuned for those!
@richardblackmore7572
@richardblackmore7572 4 года назад
How can you tell when a mower pulley (or idle pulley) requires replacing?
@EliminatorPerformance
@EliminatorPerformance 4 года назад
Wobble test, with the tension off the belt, see if the pulley wobbles side to side, up or down, on an angle, so grab one side and move it up and down, see if it wobbles. That means the bearing is no good. Thanks for watching!
@tomharries847
@tomharries847 3 года назад
Did you clean that mower before servicing? If not its one of the cleanest i have seen. You should see whats on my lift today, Last service done 4 years ago, full of rust, noisy pulley bearings as well as chewed coil leads and air filter due to mice. And they want it done under 100 GBP.
@tomharries847
@tomharries847 3 года назад
I have a quote for repair and service ready which is just over 400 GBP. Haven't told her yet, That's my 1st phone call tomorrow, wish me luck.
@EliminatorPerformance
@EliminatorPerformance 3 года назад
This mower is well taken care of, my customer keeps it clean, I did not wash it! Thanks for watching!
@Fakeus
@Fakeus 5 лет назад
Stens or Oregon are great replacement
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Yes very high quality parts!
@CivilRepair
@CivilRepair 2 года назад
Hope much do you charge for the full service?
@beanolatte2682
@beanolatte2682 5 лет назад
How much of the grease reaches the upper and lower spindle bearings?? The spindle shaft is spinning in a hollow housing, so what is the grease actually doing? I have put a dozen + pumps of grease in a spindle zert and none of it came close to the bearings. Whenever I service a mower deck I pop the seals off the bearings and add grease.
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Packing the bearing is the best way for sure, no argument there. If the grease wouldn't of went it, I would've packed the bearing. In this case though, it took a few good pumps and I could hear it going in, then it started coming out the zert, so I knew it was filling up.
@beanolatte2682
@beanolatte2682 5 лет назад
Thanks for sharing your videos!!!
@beanolatte2682
@beanolatte2682 5 лет назад
Do you have to be a business to order directly from Stens?
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Yes they require a master business license, but I've also listed the Kohler part numbers in the description, so anyone can buy these parts if they have this machine. And thanks for watching!
@jigsey.
@jigsey. 5 лет назад
Very informative video.. Have you any advice on the deck belts for snapper lt200.. Mine seem to slipping a lot and I'm on my 2nd belt of the season
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Try a half inch less on the length!
@jigsey.
@jigsey. 5 лет назад
@@EliminatorPerformance thank you for the reply 😊
@TommyTester
@TommyTester 5 лет назад
Well done. Did the mower have an hour meter? I just added one to my new rider. Shouldn't you also grease the rear axles?
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
If this was a commerical unit being used daily, I would absolutely record hours to keep track of usage. This machine is used for residential purposes, and gets serviced every year, so the hours are of little use here. Removing the wheels to grease the axles can also be done, yes. However, it shouldn't need it more than once every couple years, as the grease should stay put! Thanks for watching!
@caseG80
@caseG80 2 года назад
Greasing the spindle does nothing on most mowers seeing there's sealed bearings know for sure John Deer mowers are this way possibly this mower is different. There's a few steps to get some grease into them
@thefalcon7556
@thefalcon7556 5 лет назад
hi question; Do you know what the 12v20a 065 part is in the same tractor that you are performing the tuneup?? Is this part a fuse or relay ?? thanks for replying
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
I have no idea, sorry I couldn't be of more help!
@ziadyassine335
@ziadyassine335 4 года назад
hey Jake, just wondering how much did you charge for this job?
@EliminatorPerformance
@EliminatorPerformance 4 года назад
Hey Ziad, 2hrs labour at $65 was $130 and with the rest of parts, with tax came to $250 canadian and it was picked up the very next day! Thanks for watching!
@ghostzod665
@ghostzod665 5 лет назад
Where is your parts guy
@EliminatorPerformance
@EliminatorPerformance 5 лет назад
Stens is an American Parts Distributor, but they have a distribution center in Brantford, Ontario! They also require customers to have a Master Business License.
Далее
Riding Lawn Mower Shuts off After a Few Minutes
12:45
Х..евый доктор 😂
00:15
Просмотров 275 тыс.
Your Riding Lawn Mower's Dirty Little Secret
6:47
Просмотров 2,4 млн
Lawn mower smoking? Reasons why and how to fix it!
9:57
How to Do a Spring Tune Up on a Lawn Tractor
8:57
Просмотров 153 тыс.
Super Easy Pulley Swap and Speed Checks
8:00
Просмотров 1,4 млн
How to SUPER CLEAN your Engine Bay
21:58
Просмотров 51 млн
Х..евый доктор 😂
00:15
Просмотров 275 тыс.