Тёмный

How to Set the IP Address on a PowerFlex 525 Drive Using the HIM 

McNaughton-McKay Electric Company
Подписаться 5 тыс.
Просмотров 109 тыс.
50% 1

In this video, McNaughton-McKay's Nathan Nicholas, Systems Engineer, will show you how to set the IP address of a PowerFlex 525 variable frequency drive (VFD) using the integral drive HIM display. You will learn how to navigate around the parameters of the drive, change parameters of the drive, and ultimately change the IP address by statically assigning an IP address to the drive. You won’t need anything other than a powered on PF525 drive since we will use the integral HIM display. After you change the IP address using the HIM you will need to cycle power to the drive for the IP address to take effect.
Website: www.mc-mc.com
Contact Us: 844-687-6262 or www.mc-mc.com/Locations
Subscribe on RU-vid: ru-vid.com/show-UC7RQ...
LinkedIn: / mcnaughton-mckay
Facebook: / mcnaughtonmc. .
Twitter: / mcnaughtonmckay
Blog: www.mc-mc.com/roller/blog/
Our videos are made available for your convenience and we hope you find them helpful. Please note, however, that the information contained in the videos is subject to our disclaimer and should not be relied upon as professional advice or services. We cannot overstate the importance of reviewing the national electric code and any pertinent local codes for approved installation, use, storage and repair procedures and precautions; failure to do so may result in property damage, injury or death. Always consult with your professional advisors to determine the products to suit your intended purposes.
LEGAL DISCLAIMER:
The text, sound, graphic, video and other information and
materials made available on our website (including but not limited through our resources center and video center) or by us through RU-vid or any other social media platform (all such information and materials referred to as “our information”) are provided voluntarily by McNaughton-McKay Electric Company “AS IS” and “AS AVAILABLE.” “Information” includes any comments we may make on any website or social media platform regarding any video or other materials. Information may change at any time, and McNaughton-McKay assumes no responsibility to provide updates or revisions. McNaughton-McKay disclaims all express and implied warranties with respect to information and to the products described, including implied warranties of non-infringement, merchantability and fitness for a particular purpose. Applicable law may not allow the above exclusion of implied warranties, so the exclusion may not apply, but shall apply to the maximum extent allowed by law. McNaughton-McKay cannot and does not represent or warrant that information will be error-free, up-to-date, comprehensive or complete, or otherwise meet your requirements, or those of your customers or business partners. Your use of our resource center, video library and of information is further subject to our website terms of use. Please visit the website terms of use at www.mc-mc.com/TermsofUse.

Наука

Опубликовано:

 

19 янв 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 27   
@mikesharafinski3906
@mikesharafinski3906 4 года назад
After 20 minutes spinning my wheels on Rockwell's Knowledgebase I threw the question into Google and BAM! Thank you sir!
@mcnaughtonmckay
@mcnaughtonmckay 4 года назад
Hi Mike, Thank you for taking the time to share your experience! We're happy you found this video helpful. There will be new videos like this coming to the channel soon!
@soemin4847
@soemin4847 8 дней назад
Thank you
@jeffreyjhouser
@jeffreyjhouser 7 лет назад
Good, short informative video. Thanks!
@mcnaughtonmckay
@mcnaughtonmckay 7 лет назад
Thank you so much for your comment. We greatly appreciate it. Please let us know if there are other videos you'd like to see us make. We are always looking for new material.
@quytrinh994
@quytrinh994 4 года назад
thank you for your video, it's really helpful
@mcnaughtonmckay
@mcnaughtonmckay 4 года назад
Thank you for sharing your feedback. We're happy to hear that the video was useful for you! Subscribe to see new videos as they're added to our channel.
@j_reid_6184
@j_reid_6184 3 года назад
This video saved the day!
@mcnaughtonmckay
@mcnaughtonmckay 3 года назад
Happy to hear it! Be sure to subscribe and check out our latest Virtual Lunch & Learn series live on our channel every Wednesday at noon!
@sylkelster
@sylkelster 4 месяца назад
I carry a remote 22-HIM-A3 and a 6 foot cable in my laptop case. I find it much easier than fiddling with the drive membrane keys.
@engr.shofiqulislam9435
@engr.shofiqulislam9435 7 лет назад
Thanks, from sister denim, Bangladesh.
@mcnaughtonmckay
@mcnaughtonmckay 4 года назад
Apologies for such a late reply, but we are glad to hear that this was useful information for you!
@pluspoint5171
@pluspoint5171 5 лет назад
thanks
@mcnaughtonmckay
@mcnaughtonmckay 4 года назад
You're most welcome!
@paulomarkes9015
@paulomarkes9015 7 месяцев назад
The explanation is for people don’t know how do it or for people know how to do it?
@glennlorimer1618
@glennlorimer1618 6 лет назад
you are a genius
@mcnaughtonmckay
@mcnaughtonmckay 4 года назад
Thank you, Glenn! We hope this video was helpful for you.
@ranjeet139
@ranjeet139 5 лет назад
Can anyone help me..i have power flex 525 ac drive .we have a problem in relay output. When we change the drive frequency from HMI then the ac drive relay out put signal dropped for mili seconds ..so plz tell me whose parameter changed for relay dropped signal
@mcnaughtonmckay
@mcnaughtonmckay 5 лет назад
Hello, Ensure that parameters T076 and T081 (relay out 1 & 2) are configured correctly. You can find details on page 94 of the PowerFlex 525 User Manual in the link below. If they are configured properly and you are still having issues, please reach out to Rockwell Automation or your local Rockwell Distributor for assistance. literature.rockwellautomation.com/idc/groups/literature/documents/um/520-um001_-en-e.pdf
@kabilslimen4701
@kabilslimen4701 7 месяцев назад
Good
@josephmandes4764
@josephmandes4764 2 года назад
What do I do if i just want to find what the ip address is currently set to?
@mcnaughtonmckay
@mcnaughtonmckay 2 года назад
Hi Joseph, To view the IP address in the PF 525 off of the HIM you will need to follow the steps in the video and view parameters C129-C132. Only click enter on the parameters if you want to change the IP address. The subnet can be viewed with parameters C133-C136 and the gateway can be viewed with parameters C137-C140. You could also use Connected Components Workbench if available. We hope this is helpful! If you have further questions or concerns, please reach out to your local Rockwell Automation distributor for personalized support.
@tariknawazkhan3764
@tariknawazkhan3764 3 года назад
What if my Drive is not showing parameter C128,.... My drive shows C127 and then skips to 160...
@mcnaughtonmckay
@mcnaughtonmckay 3 года назад
Hello, check to make sure you are configuring the IP address while the PowerFlex 525 is not in Run Mode. If you have further questions or concerns, we recommend reaching out to your local Rockwell Automation distributor for personalized support.
@liaqatali-ht3it
@liaqatali-ht3it Год назад
How to disable boot function from Him module
@mcnaughtonmckay
@mcnaughtonmckay Год назад
Hello, Parameter C128 [EN Addr Sel] is defaulted to option 1 - “BOOTP.” This parameter must be changed to 1 - “Parameters” in order to disable BOOTP. Instructions on setting the IP address of a PowerFlex 525 drive can also be found on page 36 of the Quick Start Guide: literature.rockwellautomation.com/idc/groups/literature/documents/qs/520-qs001_-en-e.pdf If you have further questions or concerns, please reach out to your local Rockwell Automation distributor.
Далее
Еду за гитарой…
01:00
Просмотров 288 тыс.
Allen-Bradley PowerFlex 525 VFD IP Address Setup
1:48
How to set up a PowerFlex 523 Drive
3:06
Просмотров 85 тыс.
Jog Powerflex 525 Drive from the keypad
8:09
Просмотров 18 тыс.
How to Wire a Powerflex 525 for a START/STOP
4:14
Просмотров 31 тыс.
How to troubleshoot and diagnose a non-working VFD
8:49
Acer Predator Тараканьи Бега!
1:00
Просмотров 173 тыс.