How to set up 4 multiple instances of WSJT-X on the FLEX-6600. 

Thank you. Was confused about operation multiple Flex slices with rig control, this cleared it up.

It's strange this video hasn't had many comments or likes. It is so superior to the Flex offering about using multiple instances of digi-mode s/w and attributing them to each Slice. Thank you, Tommy de Erik EI4KF.

Excellent video

Thanks for then information.

Thanks, Tommy! So, a barefoot 400w transceiver will be 100w for each slot & mode. That would work out well. On the same band with all four modes in your example means you theoretically could use a PA. But likely not as the TX sequences vary with the modes (FT8, FT4 etc). A PA would work only with x4 with the same digital mode AND, as with FT8, all four set to the exact same TX & RX sequence (even or odd). If I understand this correctly, we would not be able to use a PA if on more than one band. On the same band, however, you could use 2 slots: 1 for FT8 and one for SSB. F.ex. WSJT is up with FT8 and N1MM-logger with SSB. That would be possible on the same screen I guess, although with the challenge of mouse-clicking in both software and writing in the SSB QSOs in the N1MM-log. Some would probably choose to go full auto-mode on FT8 (MSHV) in order to put the major focus on SSB. Fixed RX & TX sequences on FT8 would be problematic though. An SO2R setup would ensure that the PA could be used on only one band at a time in TX mode. Could be a real challenge to be on SSB with the FT8 running in fixed sequences. Much "easier" then with the regular SO2R: 2 bands x 2 SSB (or x2 CW, or 1xSSB & 1xCW). I say this because SO2R is not at all that easy to do well. For DX-Expeditions with many callers, however, the option with 4 slots x 4 TX-frequencies each in Fox mode would mean an optimal of 16 QSOs simultaneously on the same band. Would be non-stop clicking, but with Flex 6600 @ 100wts it would likely require a PA for your signals to be heard/read. Well, maybe not on 6m and 10m if good propagations & antennas with some good +dB gains. - Your comments, Tommy?

Great video. Very clear. Thanks. Dave, N4QS

Good video. Can you transmit on more than one slice with the 6600 or 6400? I'm going to order a Flex this week and want to be able to work SSB Phone while making FT8 contacts. I will order which ever Flex that can. Thanks in advance 73 NM3J

I need help with my flex 6400 getting wsjtx going.

Sorry I am k6dds

Great video, think I got it all working now after watching a few times. De N1IC