Тёмный

How to Set Up a Hand Plane to Get RIDICULOUSLY Thin Shavings - Essential Skills for Woodworking 

Jonathan Katz-Moses
Подписаться 549 тыс.
Просмотров 241 тыс.
50% 1

Get the Katz-Moses Magnetic Dovetail Jig here: lddy.no/stiz
Setting up a woodworking hand plane to get ridiculously smooth and thin shavings can be a bit of an artform. In this video I give you a comprehensive walk through on setting up a Bailey #3 Bench Plane and a Stanley #4 Smoothing Plane to get amazing results and a finish ready surface . I got the shavings as thin as .0005. Let me know in the comments what you’d like to see next week. Thanks for watching! Please like, comment and subscribe. Cheers!
Matt Estlea’s Channel: • How to get SILKY SMOOT...
Rob Cosman’s Hand Plane Sharpening Method: • How To Sharpen Hand Pl...
----
Buy the Katz-Moses Dovetail Jig: lddy.no/stiz
I have Walnut Slabs for sale: lddy.no/stj0
Buy The Katz-Moses Stop Block: lddy.no/stiz
The Katz-Moses Woodworking Apron: lddy.no/stir
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Best of Katz-Moses Woodworking Video Playlist: • Making a Modern Bar St...
----
Tools I love:
The Katz-Moses Woodworking Apron: lddy.no/stir
My Favorite Dozuki Saw: lddy.no/stit
My Favorite Ryoba Saw: lddy.no/stiv
New Flush Trim Saw: lddy.no/stix
Dovetail Saw: amzn.to/2xi5EUV
Marking Gauge: amzn.to/2nlXLuQ
Marking Knife: amzn.to/2nm39Ok
Stanley Sweetheart Chisels: amzn.to/2mVMTkF
Knew Concepts Fret Saw: amzn.to/2FUDbYZ
Dewalt Planer Package: amzn.to/2thEf6O
Forrest 10” Combo Blade: amzn.to/2Fdaee3
Festool Tape Measure: amzn.to/2oS3cjD
Starrett 6” Combination Square: amzn.to/2oP3dVw
Woodstock 3 in 1 Shoulder Plane: amzn.to/2FgAS1A
Stanley Low Angle Jack Plane: amzn.to/2oV4I4O
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
Abalone Inlay :amzn.to/2rjMTxe
Abalone Inlay Alternate: goo.gl/DHonFy
5 Minute Epoxy: amzn.to/2FijsSa
Triton 3 ¼ hp Router (with built in lift and edge guide incl): amzn.to/2LBw3Go
Kreg Router Plate: amzn.to/2A7oVNC
Triton Bushing Set: amzn.to/2A7pSpa
Bosch 1 HP Colt Router Set With Fixed and Plunge Base: amzn.to/2mHP1wY
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
¼” Inexpensive Router Bit Set: amzn.to/2JUPrJB
½” Inexpensive router Bit Set: amzn.to/2Abyhrq
Whiteside ¼” shank Spiral Upcut Bit ⅛”: amzn.to/2LDw6S1
Whiteside ¼” Shank Spiral Upcut Bit 1/4”: amzn.to/2uNanxA
SUPER MEGA FLUSH TRIM BIT ½” Shank: amzn.to/2LyH1wr
SUPER MEGA FLUSH TRIM BIT 1/4” Shank: amzn.to/2JWMFDx
45 Degree Bit I Like: amzn.to/2JRNNII
Whiteside Inlay Kit I like: amzn.to/2JV0DWp
Flush Trim Bit I Use All The Time for smaller applications: amzn.to/2uPrvCC
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
Bescutter Laser (awesome c02 and fiber lasers) Website: bit.ly/bescutter
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM #essentialskillsforwoodworking

Хобби

Опубликовано:

 

16 мар 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 302   
@JonnyBuilds
@JonnyBuilds 5 лет назад
Great info! You're the high school shop teacher I never had...
@katzmosestools
@katzmosestools 5 лет назад
Mr. Katz-Moses to you sir ;-)
@KomarProject
@KomarProject 5 лет назад
Brother your so right. Nothing better then getting those silkies. Makes me want to go play on my tool wall. Great job dude
@castletransport
@castletransport Год назад
There's something so unbelievably satisfying about hand planing. Thanks for showing us this, much appreciated
@benheinrich4306
@benheinrich4306 3 года назад
I’m a complete newbie to this entire field, and I’m already obsessed.
@alexander_konig_coaching
@alexander_konig_coaching 2 года назад
I found an old hand planer from my dad’s shop and I went through all of your videos… omg how helpful!! Great instructions! Now I have a a beautiful hand planer and can have those fine shavings! It really makes woodworking more enjoyable! Thanks again!!! 👍🏻💪🏻👍🏻
@todd4654
@todd4654 Год назад
This series of videos with both the hand planes and chisels being explained is absolutely fantastic. I really enjoy your channel and keep this stuff coming. I’m new to fine woodworking and am a little overwhelmed at all the different tools and which ones I need and in what order. It’s easy to spend a lot of money and not have what you really need. Explaining how to care for them as well as how to properly use them has been great for me to see. Thanks for your work and please give us more of this
@GeorgeSA5
@GeorgeSA5 5 лет назад
Thanks. I learnt a few things here that I didn't about adjusting a hand plane. You've inspired me to take out my hand planes and give them a try.
@seapilot4042
@seapilot4042 5 лет назад
Learned something here today. Always amazed how much engineering is put into a simple tool. Cheers
@gthiesfeld
@gthiesfeld 5 лет назад
This video came at a perfect time. I just picked up a used hand plane last week. I've watched several videos, but this one really brought it all together for me.
@jenmassano2161
@jenmassano2161 3 года назад
I just bought my first last week and searched on how to adjust it. Went through 3 videos before this one and this one seem to be the best.
@duncanvlaar8017
@duncanvlaar8017 5 лет назад
Just feeling the love for woodworking... you tell your tale with such enthousiasm and passion, makes me wanna work with wood too!
@stevenriviere1496
@stevenriviere1496 3 года назад
Jonathan, your video made a heck of a difference in my two Stanley hand planes. I’ve got a #5 that was my great grandfather’s and a #4 that was my stepdad’s grandfather’s...neither have been used in decades. Between your scary sharp video and this plane tuneup video both are making wispy shavings. Can’t thank you enough!
@mytubebobbie06h
@mytubebobbie06h Год назад
This was a great tutorial video. It clarified a whole lot for me as a novice and an aspiring woodworker to be. I appreciate your content.
@mauriceryton
@mauriceryton 5 лет назад
Great information, just spent time tonight setting up my planes. All are now cutting beautifully. Thank you.
@aam50
@aam50 5 лет назад
Thanks - that;s a brilliant overview of how to set up a plane - I learned a lot and will go and reset all my planes using the tips provided. Thanks for sharing!
@johncollins5021
@johncollins5021 4 года назад
One of the best and easiest methods of setting up a hand plane. Thanks
@brianmartin4259
@brianmartin4259 5 лет назад
Thank you for a video that actually shows all the parts of adjusting a plan. The way you did it, makes it possible to set my plains up correctly.
@katzmosestools
@katzmosestools 5 лет назад
I can't wait to see what you create bud
@denisdionne6143
@denisdionne6143 3 года назад
Thank you so much, I was that guy that couldn't get the plane to work at all. Since using your sharpening techniques and the plane setup, I love using the plane.
@MegaSchew
@MegaSchew 4 года назад
lord! thank you! I am new to wood working and bought myself a block plane but had little clue on how to get the thing to work correct. Thank you so much for this video.
@urbannpa
@urbannpa Год назад
Thanks That was by far the most informative setup video....Now I have to sharpen it.
@chipsterb4946
@chipsterb4946 5 лет назад
Really helpful! Wouldn’t have thought about what you call “backlash” in the adjustments.
@blackfender100
@blackfender100 5 лет назад
Thank you for sharing your skills and experience
@PhilC64
@PhilC64 5 лет назад
Another big thumbs up on another well done video! Finally have my No.5 Bailey dialed in and doing what it should.
@mikepears8063
@mikepears8063 4 года назад
I watched your sharpening video as well. I wanted to first say thank you so much for taking the time to make this video. I am at that stage now where I agree I am trying to get my hand plane working and I am going crazy trying to get it done. I have a few cutting boards I am trying to get done before the holidays and was seriously struggling to get my plane configured correctly.
@ivanilves
@ivanilves 4 года назад
Loved this video! Helped me a lot to fine tune my inexpensive Faithful No 5 jack plane. THANK YOU!!!
@poncho6784
@poncho6784 4 года назад
Super helpful video and great teaching skills. Can’t wait to break out my Stanley and save myself what would have been a lot of sanding time! Thanks!
@randystekly6518
@randystekly6518 9 месяцев назад
Great video and oh so helpful. I was struggling with one of my planes and your information on adjusting the frog and also tuning the chip breaker got me over the hump. Now to dial it in even more. Thanks again!
@daverthedude1
@daverthedude1 5 лет назад
Nice Video Katz. I am new to hand planes so find this sort of lesson very helpful.
@FinnJenkins
@FinnJenkins Год назад
Great video. Thank you. I got a bunch of nice hand planes and have no idea what to do with them. Now I do! Thanks
@rextored
@rextored Год назад
I'm so so grateful to you. A million thanks! It's the first time I've been able to set up a hand plane to actually work; even when I hadn't sharpened the blade yet (just out of the box) I managed to get shavings and plane down some pieces to fit together. I had not taken this cheap Stanley plane out of the box because I was afraid I wouldn't be able to make it work as it happened to me once before with a cheaper one. I'll get to sharpening the blade now. 👍💪🤘
@billqqq
@billqqq 5 лет назад
Great job explaining how all the components relate to the intended use. Very nicely done!
@katzmosestools
@katzmosestools 5 лет назад
Thank you my friend!
@holmberghandicraft
@holmberghandicraft 5 лет назад
Another great video Jonathan. Thanks again for all your hard work.
@ronaldkirchoff938
@ronaldkirchoff938 5 лет назад
Thanks Jonathan, great video with very useful tips!
@Whatthensayyou
@Whatthensayyou 5 лет назад
By 2:51 you already taught me something I never really understood before in a super simple way to understand! I had always stayed away from planes because of their price and not knowing how to set them up.. I am adding a smoothing plane to my cart now!!!! Thanks man!!!
@katzmosestools
@katzmosestools 5 лет назад
You got it bud! Let me know how it goes
@rustythecat2163
@rustythecat2163 2 года назад
Tip to correct a shaving looking like an accordion by adjusting the the chip breaking backward a very slight amount is priceless! Been using hand planes successfully for many years but did not know cause of that type shaving. Thanks, Johnathon.
@bradr.3055
@bradr.3055 Год назад
Very cool video, extremely well done and great info. Thank You!
@jettkeyser9909
@jettkeyser9909 5 лет назад
The best I have seen...Very useful...If something was omitted I cannot think of it...Great teaching/gift
@katzmosestools
@katzmosestools 5 лет назад
I truly appreciate it bud
@jameshowlet5597
@jameshowlet5597 4 года назад
Very cool! Now I feel ready to set my hand plane =) Thanks for all the useful information!!!
@morrieshoob9299
@morrieshoob9299 Год назад
I am very knew to the plane and found this video about the best I have seen for a beginner.
@avrumisolaimani8546
@avrumisolaimani8546 4 года назад
i’m 15 and i learned how to sharpen and adjust a hand plane from you thank you!!😁😁😁
@cferingacraigferinga
@cferingacraigferinga 4 года назад
Thanks for the video, super helpful and well organized.
@scottsimpey2965
@scottsimpey2965 5 лет назад
Great video Johnathan. Very informative. I have never really known how close or far the chip breaker was supposed to be from the edge of the blade so I have always set it about 1/8” from the edge but then tend to get tear out. Glad to finally know where it should be set 👍
@andrewwhitehead7252
@andrewwhitehead7252 2 года назад
Thanks Jonathan great video well explained 👍🏻
@tedwards7404
@tedwards7404 8 месяцев назад
Thank you so much for this video!!!! It makes more sense than any other video.
@teosinghsyiem9426
@teosinghsyiem9426 3 года назад
just beautiful. lots of valuable info
@amjadhani8929
@amjadhani8929 3 года назад
Very informative, thank you. I'm subscribing
@PaulK813
@PaulK813 4 года назад
Wow! Fantastic video. Thank you for this easy to follow guide. I just did this and your sharpening method and pulled a .0025" shaving off a cheap plane that is now cutting beautifully.
@katzmosestools
@katzmosestools 4 года назад
That's awesome bud! Great work!
@ktfk1228
@ktfk1228 4 года назад
Great videos! I just picked up my first hand plane and I'd love to see some videos on troubleshooting some hand plane issues and techniques.
@freudeamfahrenm5
@freudeamfahrenm5 3 года назад
Nice work!
@KateTaylor63
@KateTaylor63 5 лет назад
Thank you so much! This is the exact format that I needed to learn this information
@katzmosestools
@katzmosestools 5 лет назад
I appreciate you watching Kate!
@ArchangelArchangel-tq3xo
@ArchangelArchangel-tq3xo 4 года назад
Hey Jonathon I just want to thank for a great video I have had some old Stanley hand planes that I never used because I didn’t know how to set them up After your video I am all smile as I was using a Stanley 3 for the first time the right way Also used your video on how to sharpen I can not believe how silky smooth I just got on a piece of pine Great video Thank you sir !!!
@arturosaunya385
@arturosaunya385 Год назад
thanks for all the knowledge very useful 🙏🏽
@richhubert1260
@richhubert1260 5 лет назад
Jonathan excellent frecken video! Gives me hope that I can get my old one going!
@syedbaniamin
@syedbaniamin 2 года назад
Great, thank you for the adjustment.
@philippool4515
@philippool4515 3 года назад
Very informative video thank you!
@322doug
@322doug Год назад
I have no idea what i was doing wrong, but going thru this along with you, when i was done.... fantastic shavings from my crappy craftsman 14"....Thank you!
@mikeuk1954
@mikeuk1954 5 лет назад
Nice. 👍Your right it's so satisfying when your plane cuts as expected.
@katzmosestools
@katzmosestools 5 лет назад
So true!
@zacharyford7890
@zacharyford7890 7 месяцев назад
Great tips! Thanks!
@bkipad
@bkipad 3 года назад
Great instruction, thanks
@dombenoit9413
@dombenoit9413 2 года назад
This was very helpfull.... Very good.
@thomasstufe1676
@thomasstufe1676 3 года назад
Great video. I never got hand planes to work properly and gave up at some point. I will try again now.
@jbb5470
@jbb5470 5 лет назад
Great video! Very helpful indeed. I am new to hand planes and have a couple. This information will be helpful in setting them up. Thank you
@tiger6912
@tiger6912 4 года назад
Nice plug for Matt Estlea
@Canalcoholic
@Canalcoholic 3 года назад
Matt would probably be the first person to credit Paul Sellers for everything that he knows about setting up planes.
@shaulbenmaor
@shaulbenmaor 5 лет назад
Really liked this video, i'm working with hand planes for some time now, and I got some important insights! Thanks for the video.
@katzmosestools
@katzmosestools 5 лет назад
My pleasure bud!
@MrJumpmaster55
@MrJumpmaster55 3 года назад
Been looking for this tutorial for a while. Better explained than Rob Cosman.
@josephabakersr3884
@josephabakersr3884 5 лет назад
Very nicely done Sir, TYVM ‼️😃😁😎
@rjtumble
@rjtumble 5 лет назад
"Go until you get wood" is generally good advice, thanks. :)
@katzmosestools
@katzmosestools 5 лет назад
Full of innuendo on this one
@MJ-nb1qn
@MJ-nb1qn 5 лет назад
Also I am curious about the hair width . Are you talking about a Red hair or one of those curly black ones.
@ynotjf
@ynotjf 4 года назад
Wow, .0005” is an impressively thin shaving! I thought I was doing well in the .002” range but now I have a new level of precision to shoot for. Thanks for the video.
@aumann0452
@aumann0452 4 года назад
I don't think his that was a precise measurement. I mean there are these Japanese planing competitions and the winners often get something about 4-6 Microns. That's as thick as a blood cell. And they measure it with kinda big micronmeters, if he got 5 microns in a few minutes than that's really something to be proud of.
@laurentiustanea7840
@laurentiustanea7840 2 года назад
@@aumann0452 0.0005" is 0.0127 mm which is about 10 microns :)
@aumann0452
@aumann0452 2 года назад
@@laurentiustanea7840 my bad im used to metric I thought he said milimeters
@JakeThompson
@JakeThompson 5 лет назад
Awesome video!! Thank you!! 👍👍
@marinusbeimers7293
@marinusbeimers7293 5 лет назад
Thanks Jonathan for very informative video
@katzmosestools
@katzmosestools 5 лет назад
My pleasure bud!
@justinphillips5702
@justinphillips5702 3 года назад
Very informative
@MrBill0523
@MrBill0523 5 лет назад
GREAT lesson!! Thank you! Bill
@katzmosestools
@katzmosestools 5 лет назад
My absolute pleasure bud!
@rishiramnarace9908
@rishiramnarace9908 3 года назад
I just finished trying what you explained and got the same results. I thought the old plane was junk. thank you.
@theatticwoodworker4594
@theatticwoodworker4594 2 года назад
just brilliant thanks
@57Sauce
@57Sauce 3 года назад
Thank you for this.
@jasons6472
@jasons6472 5 лет назад
Great video.
@MrJKellerLewis
@MrJKellerLewis 4 года назад
Great video as always! Very informative. I've been subscribed for a long time now. It's funny, when I search a "how to video" I always come across one of yours
@katzmosestools
@katzmosestools 4 года назад
Hahaha we've put out a lot of videos by now. I think I put put almost 90 last year alone. That's more than most I think. Except maybe Stumpy Nubs
@BrassGrain
@BrassGrain 5 лет назад
very clean explanation, It would be nice to have a follow up video with other types of planes with different mouth adjustment like the Veritas or even wooden planes where you need to manual adjust the blade, to cover all cases.
@caseydurrans521
@caseydurrans521 4 года назад
Great video! I had no idea I was missing a chip breaker on my plane. I could never figure out why my plane sucked so bad even with a super sharp blade. Thanks!
@mytubebobbie06h
@mytubebobbie06h Год назад
Same!
@588158
@588158 4 года назад
you are a great teacher; I learned a lot! i would love to see a video on how to sharpen or retooth a dovetail saw.
@paintballbob21
@paintballbob21 5 лет назад
He probably doesn't need any more publicity, but hybrid woodworking is something that Marc Spagnuolo also espouses. He's worth watching as well. I'm glad these "basic" videos are here because setting up and using a hand plane is hugely intimidating for me. Thanks for publishing.
@DonsWoodies
@DonsWoodies 5 лет назад
I've watched a LOT of these videos and I do know how to setup a plane. Best I've ever done is .00045" thin. BUT, I did not know about the accordion effect is caused by the chipbreaker being too close. It does make sense. That's why I watch videos by various people even if I think I've heard it all. There is always something else to learn. Thank you for putting this together.
@katzmosestools
@katzmosestools 5 лет назад
My pleasure bud!
@WolfRidgeWoodworking
@WolfRidgeWoodworking 5 лет назад
What perfect timing! I've had a contractor grade block plane (will upgrade soon) for a little while and never used it. I recently purchased a couple of used Stanley Bailey planes from eBay. A newer no 4 and an older no 5 (appears to be recently restored). I was in the garage just yesterday messing around on a scrap piece of wood. I had no idea what I was doing and I think that I was petting the cat backwards. ha ha . Now I'm ready to properly adjust the planes and use them correctly. Thank you! - Ed
@katzmosestools
@katzmosestools 5 лет назад
That's great bud!
@waynemorrison9905
@waynemorrison9905 5 лет назад
Great to see that you are giving an answer to a 14 year old future maker , because it sure helped this 70 year old learner.
@wm005
@wm005 5 лет назад
Learned a lot. Excellent video...
@katzmosestools
@katzmosestools 5 лет назад
Thank you my friend!
@robertbamford8266
@robertbamford8266 3 года назад
Enthusiasm! Thanks for the video.
@friendlypiranha774
@friendlypiranha774 2 года назад
I wish you had taught me this 45 years ago. Thank you. I now understand it. Please, how about a similar video focussing on Japanese hand planes? Thanks a million.
@aaronfenwick7704
@aaronfenwick7704 5 лет назад
Definitely some helpful information here. I had a project I was working on and had the opportunity to play with some of my dads old planes. People kept asking why I didn’t just use a power plane. I tried explaining the joy of getting those beautiful bacon strip shavings. Not everyone gets it though.
@katzmosestools
@katzmosestools 5 лет назад
Bacon strip hahahaha
@garymiceli7321
@garymiceli7321 2 года назад
thanks very helpful
@FredMcIntyre
@FredMcIntyre 5 лет назад
Thanks for the info! 😃👍🏻👊🏻
@gregroberts875
@gregroberts875 5 лет назад
Great Video!!! Thanks so much!! Can you do one on the Japanese hand plane?
@thijs199
@thijs199 6 месяцев назад
was having some serious issues. but after fiddling around, and after sharpening on a glass plate. I figured out I'd taken that advice of ''a hairs width'' a little bit to seriously, it's more like a 10th of a mm. Now taking that full width shaving is like a dream. Thanks man
@thijs199
@thijs199 6 месяцев назад
oh I see now that that is about a hairs width. a thick hair then
@kiyotomiyazaki1668
@kiyotomiyazaki1668 6 месяцев назад
Thank you! Thank you! Thank you!!
@mmmkayok
@mmmkayok 4 года назад
I have several hand planes that are in need of love. I haven't even sharpen the blades yet but I adjusted how the chipper is and the Frog just off of this video and with the blades being terrible i've got a thousand times more usability out of the Plains I can't wait until I actually start with sharpening the blades to see the results I'm going to get. This video made me not afraid of trying to touch my antiques because I had no idea what to do with the blades. I could not get them to work before.
@SmallWorkshopGuy
@SmallWorkshopGuy 5 лет назад
Rob Cosman gives credit for the "Ruler Trick" to David Charlesworth. I do like the fact that Cosman calls it the best woodworking sharpening tip of the last 100 years (now that is what I call "giving credit!"). Keep these videos coming and looking forward to many cool videos from your new wood workers space (or whatever you call it).
@AertPietersz
@AertPietersz 4 года назад
Came here to say this. David Charlesworth is brilliant and he should get all the credit for his innovations.
@hannahswann747
@hannahswann747 Год назад
Thank you so, SO much! 🙏
@nualln
@nualln 5 лет назад
I mean this in the nicest way, but how do you not have a million subscribers? I hope your channel grows quickly since you have some of the best, most concise, quality woodworking content on RU-vid. Keep the videos coming!
@katzmosestools
@katzmosestools 5 лет назад
Thanks bud. That means a lot
@johnpaquette5694
@johnpaquette5694 5 лет назад
I couldn't agree more. I actually finished restoring an old stanley no. 5 plane just a few hours ago and you're approach to creeping up on the wood and squaring the blade is really helpful. I was getting pretty decent shavings but I'm going to dial it in now. Just subscribed!
@TreeOfLifeWoodworking
@TreeOfLifeWoodworking 5 лет назад
Great video!
@redcomet1977
@redcomet1977 3 года назад
you sir are a god-send :)
@nmssis
@nmssis 5 лет назад
i'm a newbie n when I get these kinda wispy shaves....very therapeutic indeed.
@Caasi67
@Caasi67 5 лет назад
My previous system for making adjustments to the lateral blade position was to basically just guess which way to move the lever and then swear a bunch and start all over. The rule of thumb to just go towards the side that's cutting too deep is much better! One of those super simple things that instantly makes you a better woodworker.
@katzmosestools
@katzmosestools 5 лет назад
Hahahaha so true
Далее
How To Setup a Handplane (The Correct Method)
21:25
Просмотров 283 тыс.
7 ДНЕЙ ЖИВУ КАК СЕЛЮК! (ЧАСТЬ 2)
22:21
Setting Up a Japanese Plane "鉋 Kanna"
22:20
Просмотров 906 тыс.
Getting Wood/Lumber Dead Flat with a Hand Plane
15:26
Просмотров 335 тыс.
The Best Way to Set Up a Bandsaw!
8:50
Просмотров 1,2 млн
Sharpening and Setting the Bench Plane | Paul Sellers
13:36
How To Set Up A Japanese Plane, 16 micron Shavings!
33:57
How to Use and Set-up a Block Plane
14:37
Просмотров 81 тыс.
How to FLATTEN Your Hand Plane Sole: The Easy Way
12:12
Обзор мощной ГАЗЕЛИ🔥
0:22
Просмотров 962 тыс.