The Block Plane - Tune Up and Use - Most Useful Hand Plane In the Shop

Подписаться 548 тыс.

Просмотров 322 тыс.

50% 1

Support What We Do at The Katz-Moses Store lddy.no/stih
In This week’s woodworking skill builder we’re going to talk about the Block Plane, tuning it up, uses and why it is the most important plane in the shop. We are also doing a brief overview of the least expensive way to get a plane blade scary sharp. In fact this system is called “The Scary Sharp System.” It is really easy to use and has a great return on investment. I really can’t wait to see what you create! Let me know what you’d like to see next. Thanks for watching! Please like, comment and subscribe. Cheers!
----
Scary Sharp Instructional Video- • Scary Sharp - The Chea...
$62 Mid Range Block Plane With Cool Lever Cap- lddy.no/goz2
(the Shop Fox I talked about in the video is no longer available BUT this one from TayTools is made in the same factory AND has the same style lever cap as the Wood River)
$129 Wood River Block Plane- amzn.to/2S3yfsj
$175 Lei Nielsen Rabbeting Block Plane- bit.ly/2S8gDeC
Sharpening Supplies I used (make sure to get the PSA paper)
Main Page of Scary Sharp Supplies - lddy.no/ecii
Individual Products I used (make sure to get the PSA paper)
$12 Honing Jig - lddy.no/ecik
$25 Starter Set with half sheets - lddy.no/ecic
$43 3 Pieces of Float Glass with Lapping Film Starter Set - lddy.no/ecif
$25 3M Micro Lapping Film Set of 6 Full Sheets - lddy.no/ecid
----
Buy the Katz-Moses Magnetic Dovetail Jig: lddy.no/stiz
The Katz-Moses Woodworking Apron: lddy.no/stir
I have Walnut Slabs for sale: lddy.no/stj0
Buy the Katz-Moses Stop Block Presale: lddy.no/stiz
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/2I3Q8m4 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
The Katz-Moses Woodworking Apron: lddy.no/stir
My Favorite Dozuki Saw: lddy.no/stit
My Favorite Ryoba Saw: lddy.no/stiv
Marking Gauge: amzn.to/2nlXLuQ
Marking Knife: amzn.to/2nm39Ok
NEW Suizan Flush Trim Saw: lddy.no/stix
Stanley Sweetheart Chisels: amzn.to/2mVMTkF
Knew Concepts Fret Saw: amzn.to/2FUDbYZ
Dewalt Planer Package: amzn.to/2thEf6O
Forrest 10” Combo Blade: amzn.to/2Fdaee3
Festool Tape Measure: amzn.to/2oS3cjD
Starrett 6” Combination Square: amzn.to/2oP3dVw
Woodstock 3 in 1 Shoulder Plane: amzn.to/2FgAS1A
Stanley Low Angle Jack Plane: amzn.to/2oV4I4O
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
Abalone Inlay :amzn.to/2rjMTxe
Abalone Inlay Alternate: goo.gl/DHonFy
5 Minute Epoxy: amzn.to/2FijsSa
Triton 3 ¼ hp Router (with built in lift and edge guide incl): amzn.to/2LBw3Go
Kreg Router Plate: amzn.to/2A7oVNC
Triton Bushing Set: amzn.to/2A7pSpa
Bosch 1 HP Colt Router Set With Fixed and Plunge Base: amzn.to/2mHP1wY
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM

Хобби

Опубликовано:

16 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 223

@katzmosestools 4 года назад

*Lots Of Links today so make sure to click “Read More”* *Scary Sharp Instructional Video-* ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eom0qu5YO94.html *$62 Mid Range Block Plane With Cool Lever Cap-* lddy.no/goz2 (the Shop Fox I talked about in the video is no longer available BUT this one from TayTools is made in the same factory AND has the same style lever cap as the Wood River) *$129 Wood River Block Plane-* amzn.to/2S3yfsj *$175 Lei Nielsen Rabbeting Block Plane-* bit.ly/2S8gDeC *Sharpening Supplies I used (make sure to get the PSA paper)* Main Page of Scary Sharp Supplies - lddy.no/ecii *Individual Products I used (make sure to get the PSA paper)* $12 Honing Jig - lddy.no/ecik $25 Starter Set with half sheets - lddy.no/ecic $43 3 Pieces of Float Glass with Lapping Film Starter Set - lddy.no/ecif $25 3M Micro Lapping Film Set of 6 Full Sheets - lddy.no/ecid

@JesseCase 3 года назад

Hi, this Is kind of a random question, but I was wondering where you got your shop apron? I really like it and would like to get myself one if possible.

@natepeterson7145 10 месяцев назад

@katzmosestools I used your link and bought like 7 tools, don't want a thank you just want to let you know so you can make sure Amazon gives you credit. Assuming it's ALL for the affiliate link you provided. I needed a planer and your video pointed me to a quality one with good reviews. Was getting frustrated trying to find a good one by searching myself. Thanks for the videos. I'm going to try out this woodworking thing now that I think I have enough to get started. Sure I'll get more once I find out what else I forgot. Have a happy 4th brother!

@chriswitek9455 6 месяцев назад

3 year later that lie nielsen is up 30 bucks. nearly a 20% increase sheesh

@gabe3eb 2 года назад

@12:08 "You can cut that out." Lol, cracks me up JKM. You the man.

@Emptei 4 года назад

Thank you for this video, I was literally tuning my block plane a moment ago!

@SailorRalph 4 года назад

Moving into my first house on a few weeks. Your videos, and some other guys too, are going to get me up and running on my first projects. I can't say how appreciative I am that y'all are putting out such great and informative content. Thank you! Stay safe my friend.

@Rage-of-War 3 года назад

The more of your videos I watch the more I really love your teaching style!!! Kudos!!!

@dimitardimitrov9781 3 года назад

One of the best footages on the subject! Thanks!

@pedalman4595 4 года назад

Thank You for straightening everyone out on how to set a plane down. Keep it up!!!!!!!!! You literately are very few out here that is THE BEST!!!!!!!!!!!!!!! The precision in which you work is amazing. I call you the the Toolmaker of Wood Working!!!!!!!!!!!!!!!!

@JS-ct5jn 3 года назад

This was just the plane instructional my brain needed. Thanks man!

@user-qg6fy4yp8t 4 года назад

Great video! I'm using my block plane a lot and when I'm working it's always within reach for all the reasons that you mentioned - it's a very versatile tool, I'm abusing it a lot and scary sharpening it as much !!! It not an expensive one but once you flatten the sole and sharp the blade you have got a great tool in your arsenal!!

@imthesunnyd 2 года назад

You earned a subscriber on this one! I watched 3 other plane videos before this one and yours was the one that got me what I needed! I used your method to adjust my plane and I finally got some super thin curls pulled off of my poplar project. Thank you for a great and incredibly informative video.

@jackleg693 3 года назад

I bought my first ever plane last week. It is a block plane with an adjustable mouth. I needed this video so much! Thank you so much for sharing your knowledge and helping me get the most enjoyment from my new hobby.

@terrmaso 2 года назад

Thanks as always. Love how you keep it simple for the slow folks, especially me. Just picked up my first plane about a month ago. Figured $10 for a Stanley handyman wasn't bad for my first endeavor into hand planes. I know it's not the most popular, but we all start somewhere. Actually just picked up two older Stanley 220 block planes today on FB market for a steal. Thanks for the great info on use and tuning. Eager to see how they perform.

@ShaunGuthrie-CaskWoodworking 4 года назад

Such a great video! Will have to go through my block plane and refresh myself

@dimitardimitrov9781 4 года назад

Thanks Jo! You made my day mate!

@chm1701 4 года назад

I was very fortunate to get a Lie-Nielsen low angle jack plane for my 40th this month, but I’ve been struggling with it. The beauty of this set up video means that I should be able to use this info to set that up too. Brilliant! Thanks so much! 👍

@kylejones2525 4 года назад

The innuendo cracks me up every time

@fedotyk 4 года назад

I simply love the way you explain things sir

@katzmosestools 4 года назад

Thank you my friend!

@Bwarned89 11 месяцев назад

Excellent video! I've been using them for years, but have recently decided to do more projects by hand and have found so many new uses!

@MartyOfAllTrades 3 года назад

Awesome video Jonathan, I always enjoy watching another setup technique.

@skater4god1 4 года назад

I love the W.M. Walker comment 😂. I was watching his video the other day after he posted it and made that jab at you.

@theatticwoodworker4594 2 года назад

simply the best block plane instructional video everrrrrrrrrr! :)

@josephjetton273 4 года назад

Great video. I have 2 block planes that I use a lot.I have a Wood River low angle and cheap (India made I think). I have tuned up both and they work great. I did not flatten by bottoms with the blade in place. I will do that before the next use. Keep up the the great videos.

@forehead949 4 года назад

You are the man Jon. My first dovetail box turned out beautifully thanks to your dovetail guide.

@katzmosestools 4 года назад

Thats awesome! Tag me on Instagram

@cvcolomb 4 года назад

I've been a woodworker since I could walk, used to have my own furniture shop; I know all this shit. However, JKM does such a good presentation and has such a great sense of humor that I always enjoy the channel and never miss a post ;-] PS looking forward to seeing the apron show up in the shop

@katzmosestools 4 года назад

Thanks my brother!

@jameslemasters9792 4 года назад

Jonathan loved the video on block planes. I was waiting on you to mention that when you skew your plane you also reduce the cutting angle of the blade. Thanks for all of your effort in helping people.

@xxepiphoneyxx 4 года назад

I watched this yesterday and almost scoffed at your comment of placing planes sideways. I came back to comment because I just tested this with my Japanese block plane and holy cow the iron moved side to side! SO. I am now a firm believer of placing my planes down and not sideways! Thank you! I might suggest the in between would be to place the planes down across a tool tray(like Rob Cosman) or opening so then you are doubly careful! Thanks again!

@sweatyworf5267 4 года назад

Love the videos man. Ordered your 8:1 dovetail jig and a few saws last month, thank you for the incredibly fast service!

@katzmosestools 4 года назад

My guy!

@SmallWorkshopGuy 4 года назад

Very good, Jonathan. Thanks - helpful - definitely learned a few new things.

@mmcl1312 4 года назад

Great video! I'd love to see more content on how to use planes.

@murphymmc 4 года назад

Great tip on the mouth adjustment feature. For whatever reason, I've never heard that explained or taught.

@darren4392 4 года назад

All these years I've been taking the blade out to flatten the soul, but as soon as you mentioned the flex, the penny dropped. That makes sense. Thank you.

@MCsCreations 4 года назад

Fantastic, dude! Thanks for all the tips!!! 😃 Stay safe there with your family! 🖖😊

@jodyfrasnelli8928 3 года назад

I have a kobalt plane and a kobalt jack plane I was always taught that a block plane was only for end grain but watching your video and several others I tried the long grain with a block plane and it worked great keep up the good videos

@JkCanvas 2 года назад

Great video and learned I have been using my block plane all wrong. thank you for educating me.

@kingdarkem 15 дней назад

Huh needed this....just got a block plane today that needs some love

@russellnentwich8745 4 года назад

This was an excellent video Katz. Using the white background gave the ability to clearly see what you were describing. Great info👍🏻

@katzmosestools 4 года назад

🤯🤯🤯

@jessicahailey4763 11 месяцев назад

the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. ru-vid.comUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.

@kenmaira 4 года назад

THANK YOU SO MUCH! I was trying to flatten a #7 I didn't know what I was doing wrong, keeping the blade in there made all the difference

@katzmosestools 4 года назад

Yeah that was an eye opener for me many moons ago. Definitely had my work cut out for me fixing the ones I had flattened wrong.

@kenmaira 4 года назад

@@katzmosestools is it because it's tensioning the cast iron, and putting stress on the inside?

@soberlivingwithbrianfrankl8254 4 года назад

Love the Palomino blackwing pencil

@robertbamford8266 4 года назад

Great info on setting mouth! Thanks.

@katzmosestools 4 года назад

Keep your mouth shut 😂

@walterrider9600 4 года назад

thank you Katz . funny story if you like . i noticed your shop apron . it reminded me of one of mine sort of . i was a motor machinist in south texas it was a friday mid summer so hot anyway i was knocking off some metal with a disk grinder well . being friday apron was dirty and oily as it gets . i noticed it was just really hot on my chest for some reason. yup it caught fire and it was a smoldering from all the sparks coming off the disk grinder. yup i was smoking hot lol . oh i am old broken down geezer who started wood working i got my no. 62 and block plane took em apart like all us do with a new toy lol . took me several minutes to figure out how to put em back together . it works so its okay lol . thank you for all your info . heads up dont let other ppl get under your skin . they are for the most part unimportant to you in the first place . rule of my thumb only ( if you are not feeding , putting a roof over my head or having sex with me you are not that important to me . be the best Katz you can be . bless you and good luck

@yvesmertz8209 2 года назад

Many thanks, from France :-)

@tekviper9 4 года назад

This was a great video ! Thank you Jon!

@katzmosestools 4 года назад

You should look up a guy named Kieth Decent. You guys might be related

@tekviper9 4 года назад

@@katzmosestools , You know what's funny Jon ? Your not the only Maker who has told me that very same thing ! Wood Work Life said this too. LOL . All the best Jon !

@chantou1721 4 года назад

good job again learn a lot

@christopherreddinger1803 4 года назад

Great video Jonathan. I use my Stanley 60 1/2 nearly every time in the shop. Thanks for the comments on LN rabbit block plane. Guess I’ll need to make room in my tool chest for another tool. On the topic of “sole to the bench’’ or “side to the bench”, I was agnostic. Then I got some remediation from the Woodwright himself, Roy Underhill. Roy is usually a very easy going guy but don’t put a plane on his bench with the sole down. His shop gets heavy use, including saw sharpening classes. His concern is not for the plane or the iron. The concern is for the stock that is being worked. Even a small steel filing picked up on the sole of #4 can leave a significant gouge on that expensive hardwood stock you have so carefully planed to a fine finish. I am no expert and certainly not hating on anyone. Just offering food for thought.

@isaacpoteet248 3 года назад

The feud has got me interested. I want to hear more lol. On a serious note thanks for the content. I new to the block plane and these videos help. I absolutely get using machinery now especially at my young age is common. However, there's something about actually learning the art

@AntonRiddell1810 3 года назад

I’ve never heard of William Walker so decided to check his channel 😴😴😴 I think my wife woke me up 😂 JK you’re a legend. Bought your dovetail jigs and absolutely love using them. Just got my first block plane. This the best video I could find out there for setting one up. Keep up the good work!

@Richard-dh8ny Год назад

Thanks for providing such great content. I recently purchased a block plane very similar to yours. It's nice a sharp, however I'm struggling to figure out how to plane an edge as you demonstrated while also keeping a nice square cut. I'm hoping you can direct me to one of your other videos that shows how to get/keep square edges using a block plane. :)

@flix4u 3 года назад

Thanks - gonna see if you have any plane refurbishing videos as I just picked up a few that were neglected and need to be refinished for use.

@timconnell4570 2 года назад

Thankyou heapsssss

@SteveC38 4 года назад

Very Nice Jonathan!

@f.demascio1857 3 года назад

Wow. I never knew that I know so little about my plane. Going shopping for a low angle.

@christianbookter1016 8 месяцев назад

Yoi answered all my questions in this video.

@volcanicsour 2 года назад

Insightful

@okmjinjin 4 года назад

OMG Katz..."Trash Garbage" might have to be my new fav saying. Thanks for that brother! lol Keep the vids coming!!

@bloodgain 4 года назад

Full disclosure that I'm no expert in hand tools, but I was really impressed with how nice the Bench Dog planes from Rockler are. Not too expensive, but nice for the price, and frequently go on sale. The soles are lapped at the factory and come tested and certified flat. I didn't test them, but they certainly feel flat in use. The blade took a few minutes of work to get flat on the back, but nothing too bad. They come with "socks" to protect them (throw a dessicant pack in there to prevent rust) and nice, sturdy boxes.

@crownmoldingbyspectaculart941 4 года назад

Great video

@norlandcustomwoodworking 4 года назад

I don’t comment much but thank you so much this was a very helpful video.

@katzmosestools 4 года назад

Thanks Steven! Truly appreciated

@evascroll 3 года назад

Nice vid!! Im kind of new on wood working(4 year) and i use my block plane exactly on does task!but not so long ago a got the lie-nielsenChisel plane and im been using it more than my block! Especially for removing glue,trimming,cleaning shoulder,ect!!! Have you used it? I dont see many video on RU-vid about it! Keep does videos coming!!

@gedog77 2 года назад

I got the LN Rabbeting Block. It’s fantastic even for a novice.

@TheTranq 2 года назад

Just got my Lie Nielson low angle adjustable mouth in the mail today 💯

@larrywiltse6268 4 года назад

Great video. I use a digital depth gage to determine the depth of the blade cut and have it "equal" on both sides of the plane.

@katzmosestools 4 года назад

That sounds labor intensive but like something I'd do. The line of site trick is very fast

@MD-en3zm Год назад

That’s interesting - can you elaborate on how you do that? It wouldn’t always be important, but could be very useful when trying to plane an edge to 90 versus the face, etc.

@whomadethatsaltysoup 2 года назад

Thanks for sharing! I'm glad to see that you are also not a big fan of the Veritas honing guide. Alas, I've owned one for a number of years, and never really got on well with it. The thing cost an absolute fortune, too, as I'm over in Scotland. I just found it, as you said, a real fidget to set up, and then found that I'd get uneven results as the chisel or block plane iron tended to slosh about in the clamp. In the end, I just went back to using my 30-year-old Eclipse.

@sageman5525 4 месяца назад

Thank you sir! Just getting into the woodworking game and you have been so helpful. This video is a perfect guide to setting my planes up? Is this the same general setup for most other planes?

@Rogerph18346 4 года назад

Jonathan the ruler trick is credited to David Charlsworth who lives and teaches in Devon, England.

@dariushmilani6760 2 года назад

Great video. The name of the person inventing the steel ruler method is David Charlesworth famous English furniture maker.👍

@richardgoebel226 4 года назад

This is the best block plane video yet. But I have a hard time setting the blade by looking down the sole as you demonstrate. I use a thin 1/8" thick piece of pine for test shavings on one side then the other side of the plane. When they are the same then the blade cuts evenly across.

@yiwutcmmedicalenlightenmen922 3 года назад

thanks jonathan - very informative - btw: david charlesworth is the ruler trick person

@angelicacastillo5464 4 года назад

As you suggested, I watched the wm walker video and I can tell you, I like the way you do things, you show more technique, have better lightning AND...so far, I have never seen a video of yours where you talk BS about anyone else. This is supposed to be about woodworking, not about being a dick and saying: "Hey, I am better than you". There will always be jealous people and than can only mean you are doing things good, so good that someone else felt threatened and thought this would make them feel better. Good for you man, you really inspire me and you are one of the persons that have made me want to start a career in woodworking. ; )

@markbryan9989 4 года назад

Setting up my planes has always been a bit of a challenge for me. I think this will help. Thanks Jonathan! PS. When can we expect to see "No Zero Day" shirts/mugs in your store?

@katzmosestools 4 года назад

Thanks bud and soon

@kieranfoster902 4 года назад

I don't know who William Walker is, or what the fude is, but I loved the demonstration of how thin the shavings are. 😂

@danielbuckner2167 2 года назад

He was an American Expansionist. He was a doctor and attorney and founded a ruled a country as a province of the US all before he was killed at 33.

@ericzander1254 4 года назад

Love the videos, and the tip about keeping the blade in while lapping....mind blown. Was using "block plain" in the title a typo or did something go over my head? Nothing plain about my planes, haha.

@saxyrep1 3 года назад

That video is a gold mine of great informations about setting up block planes. I love it. Thanks ! Also, has anyone ever told you your voice sounds just like Jimmy Kimmel's ?

@snh_lname 4 года назад

Hi JK-M, What is the marking knife you are using in the video. I am looking for a handle which will take the Swan or Stanley blades. I have about 100 of the blades but only the Stanley and Swan handles. I want something with more bling. My l-n block planes were my first quality planes. The ln 62 is my most used. Great instruction as always on the prep of a block plane. Wasn’t the ruler trick publicized by David Charlesworth? Forget it. Answered my own question. Matt’s knives are all out of stack. I’ll have to make own myself.

@vincentdeknock4186 4 года назад

Can you give a bit of extra advice on how tight to make the catch that holds the blade in place as it can be adjusted. Trying to find a sweet spot where you can still adjust the blade easy?

@joshdemarco9270 2 года назад

If I could only afford one nice block plane, would you recommend that rabbet plane, or should I stick with the regular Lie Nielsen block plane? People seem to really like the rabbet plane, but I wasnt sure if it was more of a specialty plane and not ideal for general purpose, or if it works just as well for normal stuff, and has the benefit of getting into tight spots.

@watermain48 3 года назад

Thanks Jonathan, that was a very informative discussion.

@theenderface7379 4 года назад

I know a lot of people that love block planes and I have a couple but literally never use them. I always end up grabbing my 4 1\2 smoother and it just works. My four year old little woodworker in training is the only one that uses them and honestly, it's only because I haven't been able to find a #2 or #3 yet. Not knocking anyone that loves them, just not my cup of tea because I was taught differently.

@zchach16 3 года назад

When cleaning up outside dove corners, should one approach it with a well-tempered/aligned block plane first, or sand it down to within spec using, like, those bomb-proof Cubritron pads? Starting at like 80?

@jaronb007 3 года назад

14:09 lmaoooo, great video, really helpful

@MrRon2k 4 года назад

Great Sunday video. I was just wondering the other day if I would tear the scary sharp sheets by flattening blades/chisels on them. I think you were going against the grain on some of your cuts; mein I need to stop worrying about these things in my shop. Excellent video! Who's M. Walker?

@katzmosestools 4 года назад

Try not to go against the grain. That was a mistake on my part from years of muscle memory on stones.

@DCxRecon 4 года назад

Very informative Katz!!! Where do I get an apron like yours. I get so tired of hunting for my marking knife and square!

@katzmosestools 4 года назад

I'm actually in the prototype phase of bringing my apron to market. 8-12 weeks out

@jimbo2629 4 года назад

When flattening the sole make sure your surface is at least as flat as the one the manufacturer uses! Castings do distort however. I leave a few shavings on the bench to put the plane on. If you are sharpening to 6000 it is worth it.

@DD-lc9jv 6 месяцев назад

Who would have thought that a 3yr old video on block planes would have earned you a new subscriber? But it did!

@woodfather 2 года назад

Great video cheers! Just also wanted to call out that your lddy links don't seem to be working

@MrBlakePratt Год назад

Just picked up the lie-Nielsen rabbiting block plane! Super stoked! Btw is that a Hamilton watch? Haha

@scottishjimmy9813 3 года назад

What angle is used for the sharpening process when in the jig? Thanks

@mobuilds129 3 года назад

How do you sharpen the low angle rabbiting block plane? It won't fit in any standard jig, so do you just free hand sharpen it?

@drawlele 4 года назад

So way off topic, but, I turned some shot glasses over the last few days and I wanted to use some of the "Katz-Moses Goo" only I did not need a bunch and I didn't want to use the stove or my kitchen pot and pans and decided to use one of my wife's wax burners worked out great. So yeah pro tip if you know someone who only wants to make a takeout condiment cup worth at a time or cant get catering stuff dur to stay at home orders. Great video and yeah that levering cap is awesome going to have to invest in a block plane sooner or later so think I'm getting a copy of that

@ARobichaud 4 года назад

Ruler Trick - David Charlesworth

@user-ek7tm4bl6f 3 года назад

and what about if I will sharpen 15 one side and 15 another if I have not low angle block plane? I think it will be about 35 degree. Sorry for my English.

@rockbandgamer 4 года назад

How you like that woodriver block plane Jon? I'm typically a LN guy. But just curious.

@commenter4799 3 года назад

The difference a little wax made on my cross cut sled was remarkable.

@craigchingren-hamann9700 3 года назад

Hey thanks for the angry rant... I never had thought about the adjustment question. I'll never complain again!

@adrianedhouse5175 4 года назад

I think Veritas actually make an options Camber roller which assists putting pressure on each side.

@COLDROLD73 4 года назад

Love the vids....How about asymmetric butterfly keys?............Hmmmmmm!

@Decimal91 3 года назад

I actually got to make a block plane in a woodworking class in high school and yes we did do the blades (the block planes were made out of wood the blades weren't)

@JustTony72 4 года назад

The Charlesworth ruler trick.

@vernonekstrom4320 4 года назад

DO YOU HAVE A TIME FRAME FOR THE APPRON TO GO ON SALE

@ClydePlays 2 года назад

I have that Wood RIver plane and find when I'm using it the lever cap pops open pretty frequently. I'm fairly confident this is due to my set up - does anyone have any tips on how I can prevent this?