Sorry, the best i can do is google translate. Are you trying to connect the TX12 to Betaflight? Or do you mean you are not seeing any stick movement when hooking the quad on BF?
For serial based ELRS receivers, you are required to connect it to an external power source which is usually your FC. As for flashing it, the process is similar to the radio via wifi. For more detail explanation of how to connect and flash, please review this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZdED9JqWTEE.htmlsi=UyqCVIYGAyrl9zwi
If I add a mix but don’t select a switch then flipping the switch will move the flight mode selection. But I still can’t seem to adjust the amount to correctly select modes. 😂 I’m using the TX12MKII with a Naza M V2 from DJI.
@@iFLYXWings6589I need a 3-way switch for the Flight Modes and another 3-way switch for Headless mode and the other two (IOC modes). I thought I heard something about the radio not being able to use 3-way switches the way a Quad, not fpv quad, would use them. I’ll keep learning. Nice little radio. Shame I’m yet to use it. Not sure why Radiomaster would sell a radio that is so difficult to use in some RC models.
Please confirm if you are seeing stick inputs in Betaflight but your drone is not arming? Double check the 1St page of Betaflight see if you see any warning sign that prevents the drone from arming
I have never done this before but I will assume there is a function in the radio to allow you to change the Modes, you need to switch the radio to mode 2 or adjust your channel mapping in betaflight. In addition, you might also need to physically switch your gimbal modules around