How to Setup Two Routers on the Same Home Network

Подписаться 9 тыс.

Просмотров 66 тыс.

50% 1

In this video, I show you how to set up two routers on the same home network, as well as some of the benefits you get from doing so.
📝 Check out the written article - homenetworkgeek.com/how-to-se...
🏠 Home Network Geek - homenetworkgeek.com
🧰 Recommended Gear - homenetworkgeek.com/recommend...
(Affiliate Disclosure: As an Amazon Associate I earn from qualifying purchases.)
📡 Recommended Routers:
ASUS RT-AC88U - amzn.to/2WkC9hF
NETGEAR Nighthawk AX12 AC6000 - amzn.to/3dlWMRq
TP-Link AC1900 - amzn.to/2z10elF
🎚 Recommended Network Switches:
NETGEAR Nighthawk S8000 - amzn.to/2VTS9YZ
Ubiquiti UniFi 48 Port - amzn.to/2KPTLg4
NETGEAR GS308E - amzn.to/2YLDKA0
📶 Recommended Wireless Access Points:
Ubiquiti UniFi UAP-AC-PRO - amzn.to/2WEGL2u
NETGEAR WAC540 - amzn.to/2SRJ0hH
Comfast AC1200 - amzn.to/3cpaL9i
💾 Recommended Network Attached Storage:
Synology DiskStation DS418 - amzn.to/2zRDtRH
Synology 12 Bay NAS Diskstation DS2419+ - amzn.to/2WjyIYD
TerraMaster F2-210 - amzn.to/3ddiSpn
🔌 Recommended Powerline Adapters
D-Link DHP-P701AV - amzn.to/3fcnJsM
TP-Link TL-WPA4220 - amzn.to/3rU1g99
TRENDnet TPL-407E2K - amzn.to/2yaXrXe
⛓ Recommended Ethernet Cables:
Monoprice Cat6a Cable - amzn.to/2YvdzNN
Vandesail Cat7 Cable - amzn.to/3aXCJag
Fast Cat Cat5e Bulk Cable - amzn.to/2VTyjwW
👍🏻. Recommended Services:
🕵🏼 Express VPN - www.xvbelink.com/?a_fid=homen...
🕸. SiteGround Web Hosting - www.siteground.com/index.htm?...
Contents of this video:
0:00 - Introduction
0:35 - What are the benefits of having two routers on the same network?
1:44 - How to set up two routers on the same network
3:03 - How to set up a second router using ethernet
6:54 - How to set up a second router wirelessly
9:58 - Alternatives to setting up a second router
10:40 - Wrap up
Glossary:
LAN (Local Area Network): A local network that allows the devices connected to it to communicate with each other.
WAN (Wide Area Network): A network that connects multiple LANs with each other.
SSID (Service Set Identifier): The name of a Wi-Fi network.
LAN-to-LAN: Extends an existing network connection and SSID to a second router.
LAN-to-WAN: Creates a second network within a primary network.
IP Address (Internet Protocol Address): Numerical label assigned to each device connected to your network.
DHCP (Dynamic Host Configuration Protocol): Dynamically assigns an IP address to each device connected to your network.
Subnet Mask: Masks an IP address and divides it into a network address and a host address.
UPnP (Universal Plug and Play): Permits devices to seamlessly discover each other’s presence on a network.
WPA2 (Wi-Fi Protected Access II): A type of encryption to secure Wi-Fi networks.
About Chris:
Chris is an IT professional that setup HomeNetworkGeek.com and this RU-vid Channel to share his knowledge on home networking. To learn more about him, visit: homenetworkgeek.com/about/
Affiliate Disclosure:
Home Network Geek is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com

Наука

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@cocosloan3748 9 месяцев назад

Because of you I was trying to get the second router via WAN "just outside the DHCP range that we set on the first router" 5:01 in the video and didnt work . Untill iI tried the LAN to LAN metod few hours later ... 😡😡😡😡

@blk8insider 3 года назад

Very helpful video man! This is what i all needed! Got no networking knowledge as background just trying to DiY our home extension network through a 2nd router! Was very frustrated cause i can't make it work, followed this video instructions and walla! It's working now! More power bro! Thanks!

@jonathannield 3 года назад

Spot on thanks 👍🏼

@kaiashbee5543 2 года назад

Thank you for the video, it is very helpful. I am using my old Plusnet one router as an access point in my new garden room. I've connected it to the house router via an ethernet cable and the wifi in the office is now working a treat. The only problem I have is the orange light and flashing symbol won't go on the second router. Is there a way to stop it telling me it's not connected to the broadband?

@danielgoulding3250 3 года назад

Thank for this video. It helped me to sort out a problem I had been having for the last few days.

@homenetworkgeek192 3 года назад

Glad it helped Daniel.

@danielgoulding3250 3 года назад

I wonder if you could help me please. I have managed to set everything up now as I said before. I have positioned it upstairs and when I connect it using ethernet straight to my router it works. However, if I connect it using an ethernet cable via an RJ45 coupler it doesn't pick up the connection. It's a tp link ac1200 c50. So close yet so far away!

@asafflopez 2 года назад

Hello, your video is very helpful, but I have a question ... I have several smart devices that have saturated my router, so I want to add a second router to continue adding more devices, in which configuration do the routers distribute the client load? LAN to LAN or LAN to WAN or both? very thankful

@ion182ioana 3 года назад

Thanks,it is working. But now I can't access the second router IP address ,you have any idea how to have access?

@iceskater642 2 года назад

Worked first time thanks

@porsh1111 3 года назад

You can't set router lan ip to 192.162.1.51 and then set DHCP in 192.162.2.x

@Maulik904 3 года назад

I have i-Ball(primery) and tenda router(second).(LAN to LAN connection) In 2 router which conction type I use?. It has 6 option PPPoE, static IP, DHCP, PPTP, L2TP ,PPPoE Dual access. Or choose DHCP and then turn it off at the end of process.

@PeterDoney-nr7vs Год назад

Your clip is great - makes setting up a double NAT network easy. However, I have a BT Smart Hub 2 as the ISP router and a Draytek 2862 for the second one. The reason being the BT Smart Hub does not let you assign static IP address to MAC address's where the Draytek does. In the Draytek it is no problem to change the DNS settings etc but regarding the Static IP address's I want it to assign to the various MAC devices, what gateway do I use, the BT Home Hub or the Draytek and doe I use the same range as the as the BT Hub or the daytek (192.168.2.xx? Hope you can advise Peter

@stevehewitt8862 3 года назад

I think this is the tutorial I’ve been needing for months. Just wondering if this would work with an EE smart hub and a TP Link TD-W9970. I’m trying to improve the wifi around the house and extend to the cabin at the bottom of the garden (currently have a Cat6 cable running to the cabin). Any thoughts please?

@bz3086 2 года назад

Steve, Same. I have been looking into mesh systems , but the obvious has been nagging me from the start: "a mesh system will STILL decrease bandwidth between access nodes". Using multiple routers makes better sense . the mesh systems seem to be a scam

@drew716 Год назад

Brilliant!

@roberthallas349 2 года назад

Hi, how do I set up a second router with the same IP address as the main router? They are both Plusnet routers. Thanks.

@GustavoHernandez-ey1vo 2 года назад

Hi - I have Verizon GiG connection via Ethernet cable. When I connect that Ethernet to a switch and then connect two G3100 Verizon routers. I loose wifi access from both on my iPadPro. What is the recommendation if I want both router to work independently using the Ethernet off the ONT and Ethernet switch connecting the routers?

@nixonsmateruby1 3 года назад

How do you change routers? My Plusnet router is too loud and I have a tp-link I want to use

@onetwothreefourfive12345 3 года назад

So i can use my virgin superhub as a router and modem, while also using a tp-link router in a different room? And do you know if I would be able to use the tp link as a router via a powerline adapter? Cheers

@homenetworkgeek192 3 года назад

Yes both of those should be possible Lewis.

@stefanosargyrakis4994 2 года назад

the primary router is from my internet provider and that's the router am connected to right now, but I don't have access to its setup page, and I want to get a new router to connect to each other, will it affect it if I not enable DHCP server?

@laxayrao 2 года назад

My router is at least 30 meters away from the main router can I get that long LAN cable? Cost is gonna be high, will it be a good idea, or can fiber optical cable can be used? Please help me out.

@Jake-fj6oz 3 года назад

Video has been very helpful, thanks. Was wondering why so many others advise to change the last digits of the IP address rather than increase the second to last digit by 1 like you do. Will it make any difference with LAN to LAN set up? So change 2nd routers 192.168.1.1 to 192.168.2.1 rather than 192.168.1.2?

@homenetworkgeek192 3 года назад

Changing the third octet will place the router in a different subnet but it will still be able to communicate with the primary router.

@Jake-fj6oz 3 года назад

@@homenetworkgeek192 Thank you for reply! So just changing the last octet (like other’s advise) would not have the same outcome?

@TheArborister 2 года назад

so I'm pretty sure I followed this to a T, but now my Pixel phone is connected to the second router which I set up LAN to LAN, and is saying there's no internet. any suggestions? My computer, TV, and Xbox have all connected to the second router successfully.

@eliasmuzz8660 3 года назад

if there is a second openreach phone line in another room is it possible to use this instead of running ethernet cables around the house. both open reach lines are at opposite ends of the house on different floors so ehternet cable isnt really viable. dont really want to use powerline adapters if i dont have to.

@homenetworkgeek192 3 года назад

That is an excellent question. Unfortunately I can't test it as I only have the one openreach port here, but I wouldn't have thought it would work to be honest. I would be interested to know how you get on if you decide to try it.

@UmitSeyhan75 3 года назад

You have one more sub now!

@1thinkhealthy 2 года назад

I have T mobile home internet and would like to try this using that as the primary and add my TLink. T mobile doesn't have a way to set static IPs. Would I be able to set up static IPs on the secondary router the TLink without causing problems? Thanks

@temp06j723-pmeighttq 8 месяцев назад

Why would you want to set a Static IP for the Primary router?🤔

@maol2038 3 года назад

My modem only has one Ethernet port, is it still possible to set it up this way? Do I need to disconnect the primary while setting up the secondary router?

@homenetworkgeek192 3 года назад

Yes it should still be possible and no you shouldn't need to disconnect the primary router unless the single ethernet port is restricting you from setting the secondary router up.

@RagingRo 3 года назад

If I want to connect two extra routers to the primary router, can I then connect the 3rd router to the 2nd one or does it also need to be the primary?

@homenetworkgeek192 3 года назад

I would connect both of them to the primary router.

@deving2460 Год назад

Hello Chris, I am looking to set up a network in our small campground. Would like to ask you a few questions. Is there a way to contact you?

@davidfrasher3551 3 года назад

Question... I'm using TMobile's home Internet device ... but there is no way to connect Yagi antenna to the unit ... Is there a way to us my Mofi 4500 router that is hooked up to yagi antennas) to get get the best signal and then go into TMobile Home Internet Fixed device? Any advice would be greatly appreciated.

@homenetworkgeek192 3 года назад

I'm afraid I'm not familiar with these - is the TMobile device your modem that is separate to the Mofi router?

@jihadamr 3 года назад

My dlink router as secondary router can't access the ip address now, why?

@GustavoHernandez-ey1vo 2 года назад

Oh forgot to mention the G3100 Verizon routers would be technically LAN to WAN right?

@Fullrusher 2 года назад

This is so confusing to me , I understand programing better than networking but I wanted to put a router in my room and saw the coax cable and thought probably it would work , but I'm still confused as to how all this work exactly or if this is even what I want to happen

@Hextasy 2 года назад

This drove me mad with conflicting info. He said when doing a "LAN to WAN" connection, to make router #2's IP address 192.168.1.51.... then several minutes later in the video, he said to make sure Router #2's IP address falls in between Router number 1's IP range... which was 192.168.1.2 & 192.168.1.50.... which would make one of these instructions incorrect. So I had to stop there and give up after taking notes and spending an hour getting everything ready ugh

@MrJono1999 3 года назад

I have to be honest as the title implied 2 internet connections here, where you are really discussing using a second router as on access point either via Wi-Fi or ethernet. I was hoping you were going to be discussing connecting 2 routers both to individual broadband connections of one broadband and one 4G router to share load on one network. I don't suppose this is something you have done and plan to make a video about? I have added routers as access points and have now moved on to mesh networks as I have just got too carried away with smart home devices! Good video, keep up the good work.

@apricotcomputers3943 3 года назад

SHOWWWWW USSSSSS!

@singvelu3634 2 года назад

good lecture..not much video

@willscott2409 3 года назад

Slow down ... slow down .... slow down you go wanging through the IP addresess changes so fast with no visuals to back it up... we are not all computer whizz kids... that's why we are here! Easier to follow written instruction with pictures!

@homenetworkgeek192 3 года назад

That is why I include a link to the written article in the description.

@willscott2409 3 года назад

@@homenetworkgeek192 Well be that as it may I couldn’t do it, several hours spent following this video and the written article trying to connect a BT Smart hub to another BT Hub, in the end neither of them now work.... not even able to get the Hub SSID to show up on any devices. Called BT and they couldn’t either so they are sending out a new hub..... not as easy as you make it sound!

@mrtechie6810 Год назад

Why multiple *routers*??? Just add additional access points or switches!

@razzyrazberries Год назад

Well if you're in my situation... My parents, instead of buying a switch like I told them to, bought another router so now we gotta setup another router on the network. xD

@mrtechie6810 Год назад

@@razzyrazberries sell it and buy a switch. Routers are to connect disparate networks, not to add a few more ethernet ports.

@stevehewitt8862 3 года назад

@laxayrao 2 года назад

My router is at least 30 meters away from the main router can I get that long LAN cable? Cost is gonna be high, will it be a good idea, or can fiber optical cable can be used? Please help me out.

@laxayrao 2 года назад

How long is your Ethernet Cable?