How To Skim Coat A Wall **This ISN'T PLASTER | New Products & Methods to Skimming A Wall

Подписаться 114 тыс.

Просмотров 170 тыс.

50% 1

Sign up to The Plastering For Beginners Welcome Course from the link below: plasterersblueprint.clickfunn...
Here's the tools used in this video:
--
Ox Speedskim - amzn.to/3QoUKVi
Plaster Roller - amzn.to/3WWSibo
Nela Premium Trowel - amzn.to/3ifgxCB
Ox Hawk - amzn.to/3ZlYds7
Refina Mixing Bucket - amzn.to/3ZglgV9
--
We’ll show you how to Skim A Wall. But this isn’t what you’re used to seeing on this channel. We’re using a new system with new plaster.
We’re using Knauf Airless Plaster.
And it’s a plaster that’s commonly known as Level 5 which is frequently used in America and Europe. It’s a very thin product which is what makes it a non “Plastering” method.
However, used correctly, this method can give amazing results.
If you like this video hit the like and subscribe button if you want to be part of the course.
And please leave a comment on what you want to see next. I'd love to hear from you.
Hope you enjoy the training.
Blaine Gray,
Plastering For Beginners
#construction #diy #plastering #plasteringwork #home #stucco

Хобби

Опубликовано:

23 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 281

@Bugz95 8 месяцев назад

As a absolute beginner i was so glad to stumble onto this video and find out about knauf! Ive recently added architrave to all the plain door ways and this helped doing the inside and leveling out the wall. Thanks!!

@hannahswann747 28 дней назад

You are a born instructor. Thanks v much 👍

@DIYCroft Год назад

I like these videos where you show alternative products. Keep em coming 👍

@PlasteringForBeginners Год назад

Thank you! Will do! I appreciate the feedback 👍

@oczx1 5 месяцев назад

Hey, thanks for putting this video together. I have just started learning all this stuff and I have found your video very helpful.

@LudwigHohlwein1974 4 месяца назад

This was a great tutorial. Got some stripped walls that just needed a thin skim coat. This looks like a great solution. Cheers

@shortclipsdiy5640 Год назад

looks great iv been watching your videos now for a long time. also learnt a lot from them. thank you

@PlasteringForBeginners Год назад

Thank you for watching my friend! I really appreciate it

@mattballard4804 Год назад

This looks like it might suit me when doing ceilings, which as a diyer I really struggle with, even really small ones. I just run out of time. I guess the first coat gets over joints and tape fine, then the second finishes off. Very interesting.

@markwatkinson4206 Год назад

Another great video Blaine thanks. Keep the videos coming get some great information from them

@PlasteringForBeginners Год назад

Thanks pal - hope you're well!

@markwatkinson4206 Год назад

@PlasteringForBeginners yes im good pal hope you're all well

@kevinhiggins373 Год назад

Great video Blaine ! Seems like a good product but I think I'll stick with plastering 👍

@Nickpaintbrush 5 месяцев назад

Nice one it seems like a good product, I could have done with this on my last painting job following a so called plasterer!

@briangarrod8664 4 месяца назад

Brilliant lad. Thanks a lot

@Go2Dragon Год назад

finally someone is using this system, white plaster on gypsum. I have been doing it for a year, works perfect and save me a lot of time. I dont need to flat the gypsum layer anymore. But I will put pva on gypsum first, have experienced delamination on new finish.

@Matt-yl2ok Год назад

Do you let the gypsum fully dry before skimming over with this stuff? Interesting idea .. 🧐 saves allot of troweling up I guess

@PlasteringForBeginners Год назад

Thanks for sharing matey! Great input 👍

@Go2Dragon Год назад

@@Matt-yl2ok Just like plastering the second coat of gypsum, if the first coat is just set after 2-3 hrs, I apply directly. If apply it on the next day, I pva the gypsum first. The down side is, this stuff is much more expensive.

@joeleo100000 Год назад

@@Go2Dragon what product do you use? I can't find the Knauf anywhere

@RenoTBG Год назад

Best to use with this some silicone based wall primer on plaster or painted wall also need to be primed after sanding.

@jumbo8996 Год назад

Great video.

@onepairofhands 6 месяцев назад

nice presentation sir

@LizB-ev4uw 2 месяца назад

I loved this.

@jonathanhodges6084 3 месяца назад

Great vid cheers mucka 👍🏻

@johnwealthy6044 8 месяцев назад

Nice video Blaine. Probably liken the snading phase to the work needed to float render. The sanding is easier on the elbows though!!

@user-mj2ne3ps1u Год назад

Hi Blaine. Great video as always! Is it possible to scrim tape any cracks or are the coats too thin so the tape would show thru the finish coat? Cheers Fella!

@satori169 3 месяца назад

Good product and tutorial Blaine. I'm a painter and decorator and when I need to straighten and flatten old walls, or after wall paper stripping I use Knauf fill and finish light... premixed in the tub. I just trowel it on and let dry then sand. A large tub cost around £40ish in the UK and covers a lot of square metres (depending on how bad the walls are and if 2 coats required etc) I will have a go with the product in the tutorial on any upcoming projects and see how it goes. Thanks for another great tutorial.

@JayneO-qo1oi 2 месяца назад

Hello, have you found this very same product in the UK? I have been unsuccessful in my googling 😅

@satori169 2 месяца назад

@@JayneO-qo1oi Hi, I haven't looked for the product used in the vid so don't know if it's available in the UK. The Knauf fill and sand is available in most DIY places.. it's mainly used for tape and jointing. I'm sure you can get it at most building suppliers like Jewsons etc.. I get mine from a local DIY store. It does exactly the same as the product Blaine used in the vid. If this is what you're referring to just ask for tape and jointing filler at a builders supplies. Hope this helps.

@JayneO-qo1oi 2 месяца назад

Thank you for the reply (: I'll be giving that a go!

@satori169 2 месяца назад

@@JayneO-qo1oi If you're a novice and never done it before just make sure the surface is clean and give it a scrape and sand first... you can apply the filler over large surfaces with a caulking blade or trowel easily. Just put an even fill no more than 5 mil or so all over and don't worry about trowel or blade lines as these will sand out when dry. Use 120 grit sandpaper wrapped around a block of wood or a hand sander for best results. Good luck.

@satori169 2 месяца назад

@@JayneO-qo1oi If you're painting the wall afterwards use a water based emulsion thinned down with water to seal the wall.. don't use a vinyl matt/vinyl silk etc as it could peel off. You can then use any kind of paint for top coats.

@RenoTBG Год назад

Good video but can add few things. This method is great for new straight walls, plasterboard. Can be done like plaster - wet on wet after 1.5-2Hrs and polymer skims could be sponge flattened without sanding. When you sand wall then surface is dead flat,like glass much better finish than plaster. Other thing, this stuff dry quickly, should be dry for sanding and painting next day.

@gregorydobson4307 10 месяцев назад

Being doing a similar thing with gyproc easy fill 60 using a trowel to smooth out, then sand with orbital sander connected to a industrial type vacuum. Great video by the way.

@PlasteringForBeginners 10 месяцев назад

Great idea! Thanks matey

@gregorydobson4307 10 месяцев назад

No worries, and thanks for all your videos over the months, I have gone from being a crap plasterer to a fair plasterer all thanks to you.

@SurlySteve1 8 месяцев назад

Watched a few of your videos. You are a good communicator and teacher . What trowel do you prefer for this and wet plaster , cheers

@KA0S-247 Год назад

Great how to vid... great finish in no time!!! What's the actual compound product your using though?

@nabeelah112 11 месяцев назад

Thank you so much for the videos. Is this good for newly but poorly plaster walls? Will it become smooth?

@sergeiok8499 Год назад

We used trowels and jointing knives to apply this stuff on narrow reveals where the spray fan was too big. Worked good. Still think traditional plaster is superior, for residential projects anyway.

@PlasteringForBeginners Год назад

Great to hear but I agree - plaster is superior in my opinion. But it has its uses sometimes.

@ianbroom5618 Год назад

Great video Blaine. Good tutorial. I think this would be good to have in the van for when you just need a small section done, save time mixing more finish and having to hang around. Also for awkward bits too small for trowel .. cheers

@keyboardwarrior2812 Год назад

love watching your vids. can i just ask a question? can i use this in my bathroom over tiles. once they have been prepared with pregrit.

@yellowfisher Год назад

Interesting vid, thanks for the walkthrough, really enjoying your presentations and level of detail. Gaining more confidence with my plastering ability all the time. Re the level 5, I'm presuming it's not cheap, but do you have any links to stockists. Cheers buddy

@PlasteringForBeginners Год назад

Much appreciated and its great to hear your plastering is going strong. I'll try and find some links to post soon. Cheers pal!

@simongray5592 9 месяцев назад

Excellent video - think I might just give this a go. Do you have to be careful how much you mix up, what with it drying quickly?

@martinc8847 5 месяцев назад

Great videos!! question - can i put that on a wall I have just removed wallpaper from? its not very smooth? Also good for ceilings?

@ianscottuk Год назад

Hi, this is great. I have an old victorian property and don't fancy gypsum plaster over lathe and plaster as it cracks and the thickness looks odd against the period features.

@beijaflor1492 Год назад

...nice one! Thanks!

@PlasteringForBeginners Год назад

No worries!

@martinbyrne6643 7 месяцев назад

This is great stuff , how do you manage around a windows where a square edge is required or a edge bead is needed , well explained .

@1065Olivia Год назад

Very informative video! We are removing a dropped ceiling in our Victorian and the plaster ceiling still has the original thick carboard like wallpaper. It is bringing the skim coat of plaster off with it. So far ceiling appears in good shape except for a few small cracks that do not appear deep. Could this be the solution?

@natashawilliams3604 Год назад

Had the opportunity to try Knauf spray machine, flattening afterward the product was so different to Gypsum products.

@pcno2832 Год назад

16:25 I like to go over the wall with a flashlight in one hand and a flexible putty knife or taping knife in the other, though I have to keep a second knife on hand keep the one I'm using clean and minimally loaded. This method is great for those who don't have time to learn how to plaster, or those like me who aren't really that comfortable with the timing of real plaster. I'd only use the real thing for a wall with imperfections too big for this method to easily fill. But I can see why pros who want to get in and out in one day prefer the real thing.

@PlasteringForBeginners Год назад

Very true mate - its great as an alternative but plaster is superior in my option. But I love showing the options all the same. Thanks for watching pal 👍

@mexdal Год назад

Excellent video. I also heard its breathable which might be useful in older houses. On their website they said they also have a backing plaster so you can put it onto brick walls, don't know if you have tried that or could maybe one day do another video? Thanks for your very helpful videos

@UnjustifiedRecs Год назад

Thankyou, someone who understands old houses don't want gypsum anywhere near them

@PlasteringForBeginners Год назад

That's exactly why I used it on the last job. It was an old victorian house and it just needed a re-skim. So for this job, it was perfect!! Because it was just an over skim the product worked perfectly and the walls could breath. Like you say, Gypsum would have been the worst thing to use. I've tried the backing product and I'll be honest, It's not great. No real thickness. Not worth it pal

@mexdal Год назад

@@PlasteringForBeginners ah great stuff, thanks for letting me know about that. Mine has alot of old lime plastered walls that needs reskimming so I will give that a go. Some walls need taking back to the brick, so maybe that Weber one coat render from your other videos might be good as that's supposedly breathable aswell. Hopefully these new products will be helpful on the huge Victorian housing stock in the UK as they can suffer from damp issues Cheers

@randomrazr 8 месяцев назад

can u skim coat on painted popcorn wall? or do u need to prep it with sanding or priming with somehting?

@Onthetrowel Год назад

Loving these vids mate, what's the score with prep? Do you pva first ot just get straight at it?

@Onthetrowel Год назад

Ahh, 2 seconds later you answered my question 🤦‍♂️

@PlasteringForBeginners Год назад

Haha thanks matey! Hope you’re well my friend 👍

@karmele1306 2 месяца назад

Fantastic video, im going to give it a go but at ceilings, any advice?

@scarr998 Год назад

Great videos as usual. I always learn a lot from them. Can you use this product to do a ceiling?

@PlasteringForBeginners Год назад

Thanks matey - and yes! It’s best with this particular roller in the video though. Holds the plaster at a better rate

@pcno2832 Год назад

Yes, they use stuff like this on ceilings all the time in the USA.

@scarr998 Год назад

@@PlasteringForBeginners thank you for the reply. Keep up the brilliant videos.

@woody1380 Год назад

13:17 Great advice 🤣

@adamseddon2572 Год назад

What roller would you use for a gypsum multi finish pal? Going to give it a go

@wemoveforward6413 Год назад

Hi pal. Have you used toupret joint and skim? Could that be used for similar thing? Minus the use of a roller

@bird-yd7ge Год назад

Double the work

@LittleJimnyUK Год назад

Can you use this over old paint on a wall. Do I need to prep the wall first with something like PVA to seal the old paint?

@brookehazel8210 20 дней назад

Great video. Can you use this over a painted wall?

@Danme1987 Год назад

Good for DIY

@PlasteringForBeginners Год назад

👍👍

@qpBraveXLqp Год назад

Commonly used in rest of the world. I find it way better and consistent in victorian properties. Multifinish cracks, blisters and is more unpredictable even on well primed old walls. While this compound I can plaster big room in one day no problem and if it blisters I can fix it way easier. Best part I can usually get to sanding (mirka sander and dust extractor) and painting next day.

@ovidiuradoni-lisacenco2207 5 месяцев назад

Don't you need two coats and then sanding? That adds up to 3 days...so how can you do it in just two? What am I missing here? Any other tips would be much appreciated. Thanks for your help 🙂

@manceconomist Год назад

If you drill to put a plug/screw will it be okay and not crack around the hole? If it needs a proper plaster skim further down the line, will the plaster skim be okay on top?

@ainenilaoire Год назад

Thank you Blaine. Can i use this on Plasterboard? Will it go over the beading on the corner joins ???

@adrianadios5041 2 месяца назад

Yes but plastic beading with mesh

@Nex126 Год назад

At the beginning you are showing a bag of the product, but when you are demonstrating you are using ready mixed ... is there a difference other than the obvious, also when can't you use the product as you mentioned at the beginning. Great demo thanks.

@Tonysteele2 Год назад

Can you use this (and/or knauf pro roll) on masonry backgrounds?

@greenup9913 Год назад

Looks a decent method for a DIY, if its not expensive,

@PlasteringForBeginners Год назад

👍👍👍

@davidpatten4466 Год назад

Is this not very similar to thistle filler finish compound? I was very nervous plastering my chimney breast and had some thistle powered filler and used it like it was plaster, was way easier to work with smoothed out really nicely dried far quicker and any slight user error could be sanded easily. Granted I wouldn’t want to do a whole room with it but in my case I was doing above a picture rail and it worked out perfect. Side note thanks to your videos I got results I probably wouldn’t have done otherwise.

@willm437 Год назад

Looks like a great product mate 👍

@PlasteringForBeginners Год назад

It’s good for certain situations…not good for everything though 👍

@AC-xw5tj Год назад

Thanks for another great video Blaine. Can this skim coat be used over pre painted walls and if so would you need some sort of primer?

@PlasteringForBeginners Год назад

Thanks mate and yes you can. No primer needed - just make sure there’s no grease on the walls. It doesn’t stick well 👍

@bmostert Год назад

Came to ask them same question. Would you advise scratching the painted wall at all first?

@GoldenToothBrush 2 месяца назад

@@PlasteringForBeginners Can you use this over wallpaper?

@mojomaze 10 месяцев назад

Could you use this for skimming an artex ceiling?

@nickcowen4565 5 месяцев назад

Could you use this on those textured ceilings old houses have?

@stuartibbotson7179 10 месяцев назад

Ok what you think about using pre made skim coat like Gyproc Easifiller Finish, i was about to skim coat a wall , but that Venetian Plaster video got me thinking wow

@martincable3752 Год назад

Hi Blaine - love the video’s. Quick question… would this work on an artex ceiling?

@PlasteringForBeginners Год назад

I think you’ll struggle matey. The thickness is the big problem with this product pal.

@martincable3752 Год назад

@@PlasteringForBeginners thanks

@Wiljuchi 5 месяцев назад

Would it be a good product for me to use over a lightly textured ceiling (small utility room)?

@WILCO1uk Год назад

I used a similar Knauff product (pro roll I think) to do my hallway and stairs. The sanding stage was a nightmare, but my biggest issue is its hardness. Even after setting it is really soft and easily dented. I now use it for ceilings only because of this.

@PlasteringForBeginners Год назад

It’s stronger than Pro-Roll to be honest. It sets quite hard once it’s fully cured but I must admit that plaster is stronger. But yeah…I agree with what you said there 😉

@RenoTBG Год назад

Try use polymer type skim like Atlas GTA or Knauf fill & finish blue also you can use silicon base primer after sanding, it gives more strength to skim.

@okafka5446 Год назад

@@RenoTBG These give harder finishes than the Knauf airless plaster? Silicone base primer - something like Isomat Silicone Primer?

@RenoTBG Год назад

@@okafka5446 Don't know how hard is Knauf airless but Atlas GTA have good balance between hardness and sanding. About primer, any silicon or acrylic should be good, Atlas uni grunt or Ceresit CT17. Diluted PVA or paint -miscoat are homemade primers not comparable to proper ones, they bond dust but not penetrate surface, wall, bricks, plaster, paint etc.

@okafka5446 Год назад

@@RenoTBG Thanks, that all makes sense.🙂

@kevinwells768 Год назад

Can this be applied direct to a painted internal wall?

@kriswhitmarsh9458 5 месяцев назад

Can this be used with corner/stop beads - have a couple of small walls that have external corners and another where we want to leave some exposed brickwork.. Appreciate any advice..

@ianyanto123 Год назад

can you use this upto beading or are the coats too thin??

@tdub8719 Год назад

Thank you for the heads up on this product Blain. Can I ask a question which may be stupid but can I put the compound straight on to plasterboard instead of plaster? I have no experience of plastering etc so asking as a newbie. Thanks

@RenoTBG Год назад

This is great product for plasterboard, much easier for beginner. Remember only to tape/joint all boards edges.

@tdub8719 Год назад

@@RenoTBG Thank you

@ainenilaoire Год назад

@@RenoTBG is i ok to use meral beading on plasterbiard joins or woukd i get away with using skrim tape???

@jamiekemp2357 Год назад

We all want to see you do some tape jointing , finished with paint to see what finish is better lol

@fergaldaly6567 Год назад

Can you put this on slabs and do you still have too tape between slab?

@mikerichter1694 Год назад

It might be a good idea to add a little colorant to the final coat?

@RenoTBG Год назад

Colorant is good idea for touch up's after sanding ;)

@oc1625 Год назад

That stuff looks fantastic actually. Can I use it instead of tape and joint on new plasterboard? Probably not but I'm asking anyway in case it saves me time!

@PlasteringForBeginners Год назад

This is the problem. You still need one coat of filler and tape on the joints…that’s what killed this system for me on plasterboard. I like it on existing boards but didn’t like this aspect on plasterboard

@jackiecole7005 4 месяца назад

So can you use this product on a wall that you’ve just removed wallpaper? Say if there are quite a few dents behind?

@Ferbeldeyberb 6 месяцев назад

When you apply with a roller, how do you get it right up to the edges, do you cut in with a brush?

@beckham7hall Год назад

Can you use this straight on plaster board? thanks

@chrischaplin8497 Год назад

Very interesting video for someone who has done a small amount of Plastering. How much stabilising does it require before painting and and how durable is it to knocks/scuffs etc?

@PlasteringForBeginners Год назад

It’s pretty durable but no where near as strong as plaster. One mist coat and you’re good to go 👍

@dwalker7720 7 месяцев назад

can I do apply this over chipped wall texture ?

@filipek7553 Год назад

I can't believe after decades it's arrived to the England! It would be next few decades to accept it by common John.

@PlasteringForBeginners Год назад

I wouldn’t count your chickens. It’s got its faults and I still believe plaster is the better product. And it needs a lot of prep on plasterboard (tape and joint beforehand) so it’s not perfect. Plaster still wins in my opinion

@filipek7553 Год назад

@@PlasteringForBeginners for sure plaster is better if we speaking of longlife, hardness etc. Gypsum is better if we speaking of cost and time. I am moaning because I was refused all time by British client. Others was fine. Back to tapping jointing - it could be your last step if it was made properly.

@stephensimkiss5888 Год назад

We are yrs behind in building techniques bud

@choncord Год назад

@@stephensimkiss5888 A single room has taken 3 days and then sanding dow. I think they're the ones behind the UK. Get it plastered and done in a few hours.

@Droningonuk Год назад

Quicker and better to skim

@andreatorres1287 6 месяцев назад

Great video. Do you know if I can do this in a wall that used to have wallpaper on it? I wanted to paint a wall and while sanding I realised it had wallpaper underneath and beneath that a multi finished wall with multiple cracks. I am so confused, i wanted to do some painting and now I need to be a tradesperson

@JayneO-qo1oi 2 месяца назад

Hello there (: Unfortunately, this is my current predicament... May I ask how you preceeded?

@aceventura2154 11 месяцев назад

I can only seem to find Knauf Pro roll from Wickes. How much will 1 tub do and is there anywhere cheaper?

@TheSadButMadLad Год назад

Roger Bisby did a demo of it some years ago. He showed it being sprayed on rather then using a roller. Only thing I can say it's good for is for plasterboarded walls (which is what the Yanks use) and that it provides a nice base for painting walls.

@PlasteringForBeginners Год назад

It's actually more work on plasterboard because you have to prefill the joints beforehand - that's what put me off to be honest. But It's rapid if you spray it. Very fast!!

@RenoTBG Год назад

@@PlasteringForBeginners I think is less physical effort than plaster even if you need to do joints and much faster application. You should do both coats with long skim knife in few moves, don't need trowel and second coat wet on wet. In theory: if you get whole, 3 bed house in plasterboard's, 2-3 people team could, joint, skim, sand and paint in no more than a week.

@teedubz88 Год назад

I got way too excited about everything in this video 😂👍🏻

@samanthagoodwin2751 Год назад

Please can you advise where we can purchase this?

@kbear598 5 месяцев назад

Do you have a link for the air plaster?

@kevocos Год назад

Really would love to know how breathable it is. It could be a great product for DIYers who need to plaster over existing lime plaster. It would remove the pain of trying to find a plasterer who is willing to work with lime.

@ValyArdeleanu Год назад

Hi. Seems that I cannot find this product. Any location, shop in London? Thank you.

@creepshow1978 Год назад

Can this be applied over artex?

@sirt.5261 Год назад

Can you recommend Where can we get that product?

@homeshield5863 7 месяцев назад

Can you apply this to fresh plaster board ?

@bourne808 5 месяцев назад

Would this work on a knockdown textured wall?

@voyt5729 Год назад

Where did you buy airless finish. Nowhere to buy in Manchester...

@mathewgallimore1484 3 месяца назад

How thick does this go on overall? For example, can it fill a 3mm angle bead

@seanbroadbent7738 Месяц назад

Can this be applied to a wall after I have removed tiles which takes of the plaster and the board paper.

@woody1380 Год назад

Can you show how to deal with corners and skim beads with this stuff please

@johnwakefield1077 7 месяцев назад

Can you use this over artex

@deanosalford Год назад

where do you buy this product from ? :)

@UTO0O0B Год назад

For someone who's never plastered before and cant afford a professional plasterer, is this a good solution for a complete beginner who needs to smooth off marginally imperfect slightly bumpy walls?

@joeleo100000 Год назад

Is there any alternative products to use as the Knauf airless finish is not for sale anywhere in the UK

@RenoTBG Год назад

Atlas GTA polymer top coat.

@giogio4833 4 месяца назад

Interesting stuff...but i think I'll stick to multifinish.probably works out cheaper too.

@MrRdt1970 Год назад

What roller is he using, also seen lots of guys put a single coat on and the finish is perfect

@PlasteringForBeginners Год назад

The links in the description of the video mate

@darrenpaulgreen Год назад

I’ve used to work with a decorator that used easifill thinned down to do basically the same thing. I equally hate the dust that’s created by the sanding stage, but I think if you were doing it a lot (eg a house renovation) then a drywall sander with dust extraction would be the way to go.