How To Skim Coat Your Ugly Ceiling With a PAINT ROLLER!

Подписаться 308 тыс.

Просмотров 1,7 млн

50% 1

How to skim coat your ugly ceiling with a paint roller is what today's video is about. I'll show you how to apply a skim coat to a ceiling with a paint roller and a 14" drywall taping knife. This is skim coating a ceiling for beginners tutorial for anyone that is sick of looking at their ugly ceiling! Thanks so much for watching and subscribing! -Paul
🔴 SUBSCRIBE for more useful Skim Coating and Drywall Tips!
Here 👉 / @paulpeck
Hello everyone, I just enabled the Membership feature on my channel!
Please consider becoming a member of the DRYWALL CREW!
Check out these membership perks:
/ @paulpeck
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
✅ LEVEL5 TOOLS Black Friday Sale
Up to 30% Off Storewide!!
level5tools.com/?ref=PeckDrywall
(Affiliate Link)
✅Here's a link to my Drywall and Painting Shop on Amazon where I have each and every tool and product I've used in this and all of my videos: ▶ www.amazon.com/shop/paulpeck (These links are my Amazon Influencer store links where I do earn a small commission if you make a purchase at no additional cost to you).
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you're new to the channel welcome! My name is Paul and I've been a drywall and painting contractor for over 20 years. I'll be sharing tips, tricks and how to videos for all of your drywall, texturing and painting needs.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Here's all the videos from this ceiling repair series*
NO MORE CRACKS On Your Ceiling Repairs Playlist!
• NO MORE CRACKS On Your...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
More Crack Repair Videos:
How to Repair a Ceiling Crack- Diy Drywall Repair Tips and Tricks
• How to Repair a Ceilin...
How to easily fix drywall cracks on walls and ceilings!
• How to easily fix dryw...
How to repair a cracked drywall ceiling trick! Foot through Attic Drywall Ceiling Easy Fix! • How to repair a cracke...
How to Actually Repair Drywall Tape Joints on a Ceiling!
• How to Actually Repair...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Skim Coating GAME CHANGER for Drywall finishers and DIY Drywall!
• Skim Coating GAME CHAN...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
** More Helpful Videos Down Below **
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
FibaFuse Drywall Tape:
• Fibafuse drywall tape
Here's a Water Damage Repair Video Series where I show you how to access and dig into the water damage drywall ceiling and a water blistered wall: • Water damaged ceiling ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Skim coating walls for beginners tutorial
• Skim coating walls for...
Never seen before skim coating tips and tricks to skim walls yourself • Never seen before skim...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Easiest way to repair knockdown texture on a wall patch ever!
• Easiest way to repair ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I was mad and punched the wall! How to repair hole in wall tutorial • I was mad and punched ...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 2- How to Skim Coat Walls Demonstration
• How to Skim Coat Drywall
Part 3
What to do after skim coat dries? No sanding!
• What to do after skim ...
Part 4
How to touch up a skim coat before sanding skim coated walls • How to touch up a skim...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Part 5
How to sand a skim coat fast and easy!
• How to sand a skim coa...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How to skim coat using paint roller trick- Getting rid of Knockdown Texture- • How to skim coat using...
*(Part 2) How to skim coat trick with a paint roller and joint compound- • Video
My Facebook Drywall Help Group
/ drywalltexturinghelp
Instagram
/ peckdrywallpainting
Twitter
/ peckdrywall
TikTok
vm.tiktok.com/ZMJa3opKJ/
Tag me --- #DrywallTube
#PaulPeck #DiyDrywall

Хобби

Опубликовано:

4 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,1 тыс.

@PaulPeck 3 года назад

Here's this entire video series playlist: ru-vid.com/group/PL7Ww-LhWbB0F8fOEwjAbiJyT6YYFERvUL Thanks so much for watching!

@77leojr 3 года назад

Hey Paul new subscriber here I’m attempting my self to learn the skim coating technique ... how long do you wait for the 2nd and 3rd step ? Can I finish a whole day ? Also can I substitute the 3rd step with a nice knockdown texture ?

@bel.sat.9051 3 года назад

How big is the knife ? How many inches?

@garfieldchannel1677 2 года назад

@@77leojr r WY Uganda d it dB j the road

@pearlperlitavenegas2023 2 года назад

@@77leojr my handyman allowed each coat to dry at least 12 hours

@thedarthflagger 2 года назад

Had a guy who would mix it with his bare feet

@onechain13 2 года назад

I like how you go straight into the content and the voice over to fill in the necessary details. Great videos!

@eddievantailn2882 2 года назад

I'm a DYI'er, I am building my first basement project and it is coming along better than I thought it ever could thanks to guys like you who teach from experience. Thanks a lot, I really mean it.

@dzzedge 3 месяца назад

I used this method on my walk-in closet, after I removed the dreaded popcorn. What a breeze, Paul. No sanding needed. No texturing needed, smooth as silk. So very happy with the results. Thanks a bunch!

@PaulPeck 3 месяца назад

That great!💥👏🏻 Thank you so much for the awesome feedback and the Super Thanks.🙏😎

@tjay1156 2 года назад

Alot of people don't know what they are truly doing when they do videos like this but from what I see you are experienced and have an eye for detail. I've been a professional painter for 11 years and I take pride in my work. You must have a priority on details to make the job look as good as possible. Keep up the good tips👏👏👍👍

@chanreka Год назад

Just Thank You! I have skim covered two different rooms in my house and it has been more work than I could imagine. However I tried your technique and it took me a fraction of the time and my shoulders weren't burning when I was done! Thank you so much!!! #drywalltube 😊

@TheAmazingRandy 3 года назад

I was going to college until I started watching your videos.

@jesusaboyyes4413 3 года назад

😂😂😂

@trina1962 Год назад

This comment should win the internet!

@GoodVibesOnly1914 Год назад

Wish i never went. I did side jobs out of my college appartment and made 5x what I did out of school. Quit that job and went back to construction anyway lol. In sales now but if anyone reads this, contracting or sales is a way better alternative to joining the rat race

@westcoastorbust2462 Год назад

Smart

@Anna-kd5oz Год назад

😂😂😂

@jpvintage Год назад

There is something way too comforting and relaxing about watching this video... Great tutorial BTW! I feel pretty confident in attempting my ceiling project. Thank you 😊

@gregmcallister2821 3 года назад

You make it look easy. I've got a 1400 sq ft rancher we're closing on in 2 weeks and have looked at a lot of videos, but the roller idea looks brilliant. I scraped, sanded and painted about 600sq ft last year and it's a lot of work.

@anothergamingchannel2656 11 месяцев назад

I'm a drywaller and have been curious about trying this method for awhile. Did you try the roller method and did you prefer it? Some of the guys I work with have kind of dismissed the idea and gave reasons why they didn't agree with it, so I'm on the fence about trying it. It seems easier than applying the mud with a drywall knife or trowel tbh

@lynusrankins4588 3 года назад

Retired drywall mechanic of 35yrs., great job!!!

@gobic1319 3 года назад

Thanks for that video Paul. You make it look easy, of course there’s no substitute for 25 years of experience, but I have followed your advice and instruction on a couple of projects in the past, and they turned out pretty good for a beginner. I hate to think what they would have looked like if I hadn’t watched your videos first. You’re a real godsend.

@1990enrs 6 месяцев назад

Es lo que hace la experiencia ( experimentar con tecnicas y adoptarlas para el trabajo ) no es el tiempo

@beejp8 2 года назад

Amazing! I would have spent days doing that by hand. At 62, I will be able to do ceiling so much faster and better. I am a perfectionist. Thank you for sharing!!!! I was a USAF wife for my husband’s 30 years-we just hit 39 years of marriage. He was gone so much flying and deploying, I had to teach myself how to fix everything. I taught myself how to repair drywall. My son deployed and I removed several rooms of popcorn ceiling for him while he was deployed while watching his house back East. I wish I’d known this process in 2014!

@anothergamingchannel2656 11 месяцев назад

Shout out to you for dealing with popcorn ceilings. As a drywaller I dread popcorn ceilings lol.

@meloearth 8 месяцев назад

I have a room where some lazy person popcorned ceilings and all the walls. I hate it so much, and spiders love it. I want to make everything smooth again. This was helpful. I like this roller method! I will do the same for the walls. Thanks

@jeffostroff 3 года назад

I used to have a problem with making trowel lines when I did parallel troweling until I saw your videos a couple of years ago talking about just what you mentioned here, putting pressure on one side of the trowel.

@konamanstudio2447 3 года назад

🍻🍺☃️

@jacquelinewatkins6069 3 года назад

Me too

@PaulPeck 2 года назад

Good to know Jeff.👍🏻 I really appreciate you watching and commenting my friend! -Paul

@m.c.robb-thecoonasscook8287 Год назад

Thanks for your videos. I've been painting for 26 years as a professional house painter and decorative faux finishing artist. Never did drywall because I'd never knew how. Watched a couple of your videos and applyed it to my own home. My skill level skyrocketed because of you. Thank you again. I have a very hideous ceiling texture which I absolutely hate. Plus I have vent holes from the previous air condition to cover up. Going for a smooth effect. Looking great so far. I am located in South Louisiana

@PaulPeck 10 месяцев назад

That’s awesome!💥👏🏻 Thanks for this awesome feedback!😎

@BillWalters77 3 года назад

Yes! I found removing the grate and just using the bucket and roller worked really well. Thanks Paul.

@rachellaurent4394 3 года назад

My first renovation! Kitchen ceiling. It's scary! Thank you for showing us step by step. Couldn't have done it without the video.

@geniusjen78 3 года назад

Wow! Thanks for sharing this option! I loathe our popcorn ceilings almost as much as the idea of scraping them. Looks like I may get smooth ceilings after all!

@tedmcdonald3377 3 года назад

Thanks Paul, going to try it this week on a 50 year old unfinished kitchen ceiling. Not much experience with skim coating but I'll let you know how it turns out😊

@huncho5005 Год назад

How did it turn out.

@jonsmith2265 3 года назад

Great job. You make it look easy. One thing I have learned over the years is I don’t ever want another textured ceiling.

@anothergamingchannel2656 11 месяцев назад

As a drywaller myself, I'd take a textured ceiling over smoothwall any day. I feel lucky when we do textures. The heavier the better lol. Heavier texture means less touch up, which I hate doing touch up.

@JustAnotherConspiracyTheorist 10 месяцев назад

@@anothergamingchannel2656yeah, who cares if it's ugly, as long as it's easy.

@stevelopez372 10 месяцев назад

@@anothergamingchannel2656 You bet, flat walls would make no sense in my Hacienda style home in SoCal. For that matter neither would comp. Shingles Lol.

@Pr3lude9 4 месяца назад

I’m about to smooth out my first texture ceiling. Then I’ll have two more to go, the last one is a spare room I’m not concerned with yet. Hope it goes ok.

@michaelgregg8943 3 года назад

I’m just a handyman and I appreciate your help! It’s giving me more confidence.

@devohnmitchell 10 месяцев назад

Thanks...i did this with a paint roller like u said and it worked better than i thought. After it dried i sanded everything down and painted it and the ceiling had a textured look. 👍🏻👍🏻👍🏻

@luisgodinez865 4 месяца назад

thats odd the whole purpose of skim coating is to have a smooth finish

@scottjohnson9912 3 года назад

I'm a landlord and I've just finnished removing a popcorn ceiling and wow , its bad up there . Thanks for the video. Now I know how it's done .

@lamar7bn 2 года назад

I did the same thing, removed the popcorn texture and boy! It's ugly asf. Will try this method

@urgentmeow 3 года назад

Thanks for this really clear and informative video. I'm a DIYer looking to fix up an ugly ceiling in a bedroom of my house. Going to try out your technique!

@kennethelliott6522 3 года назад

I am learning to be a DIY technician on dry wall it was a challenge on how I would remove my old popcorn ceiling and renovate it.It appears like it is impossible until I watch your videos,thank you I am now confident that i can do it.

@greggin9116 3 года назад

I’m a diy-er wanna be. I like tackling new jobs and learning new skills. You’ve inspired me to try skim coating my ceiling. Thank you for sharing you techniques.

@Aussiesnrg 3 года назад

Do it! My lounge room looks like a new room thanks to his advice and inspiration ;)

@timruffin2591 3 года назад

Dyi guy your video is very good for us guys trying to figure it out!!! Thanks!!!

@ethelbernal8938 2 года назад

Anyone else have millions of tiny bubbles in their mud?

@GB-ue6wr 2 года назад

I just did 2 rooms.. use Plus 3 mud you can get it at Home Depot, it sands easy. The sanding is the worst part..

@sairasedano3096 3 года назад

Thank you! It was life saving to try your method!!! First time doing my ceiling. I had tried to do it the old fashion way and it was such a pain.

@PaulPeck 3 года назад

That’s awesome Saira!💥👊🏻 Glad you found my video helpful! Thanks for watching and commenting my friend!😎 -Paul

@markgraybill737 2 года назад

Great video, a technique I hadn't heard of. I am a DYI that has to get done quickly and cannot get a contractor in because they're all booked out for months. My house has an old vaulted ceiling with two layers of texture that's starting to fall off the drywall paper, which started with just bubbling. It didn't take long to realize that I'll need to pull it all off and apply a couple of skim coats before I retexture it. I have limited time and am hoping this technique will be a godsend. I'll let you know when I'm done.

@Chef1Mat 3 года назад

i am a DIYer and i will tackle most jobs around the house. i have just recently skimmed the ceilings at my sons new home. wish i saw your tutorial first. still came out nice, i actually used plasterboard adhesive as i had it left over.

@johngorman 2 года назад

Hi Paul, great video, I am a retired UK Artex Texturer. I was doing this for years to cover old ceiling patterns. Artex was asbestos bound so it was recommended not to scrape down, easier to cover like this to flatten down then re- pattern.

@richat1691 Год назад

I think u have answered my Q..U can use this method over an artex textured ceiling?

@johngorman Год назад

@@richat1691 Yes you can but you must prime the ceiling first and allow it to dry out.

@jesusjaviergarcia 3 года назад

Killed it‼️🔥

@yoannybatista4202 3 года назад

DYIer here. Right now working on remodeling my kitchen. Your video showed up. Thanks to God. Put up all the Sheetrock panels getting ready for drywalling mud and tape. Had to remove soffits and need to cover the joints with existing ceiling whicg is a thick 3/4 inch 1950s plaster. This technique is awesome

@bestplayground 3 года назад

I skim coated over a painted knocked down textured ceiling using USG Plus 3 joint compound. I was a very large room and had numerous areas that had poor patch work along with two long seams that were humped a 1/2” and needed to be floated out to

@johnt.5516 3 года назад

I removed a popcorn ceiling by spraying water on it first with a paint sprayer. It worked great! The 40y/o sheetrock was not finished the best in the world. I watched this video and tried it. It worked great! now I'm watching mud dry. :)

@sandman9000 3 года назад

I'm a finisher by trade and can skim coat with the best of them....I am running my head into the wall at the fact that this makes soooooooo much sense 👌

@PaulPeck 3 года назад

Hey hey Sandy!💥👊🏻 I really appreciate that! Thanks so much for watching and commenting my friend!😎 -Paul

@nailahandreapineda5594 2 года назад

@@PaulPeck Hi! Can i use a regular paint roller in applying the skim coat?

@Luisita621ny 3 года назад

I love to watch how he’s doing it👍🏻😁

@julielakin8405 2 года назад

I skim coated my bathroom and then sanded it. The dust is awful. It got everywhere and on everything. I did my best to keep it contained but it was still bad. It was my first time and want to do the main living spaces too but the dust really turned me away from the idea. You didn’t have to sand and gave great tips so thank you!

@katiekillian7042 Год назад

I am going to try this method to smooth out my ceiling and walls in my spare room. I scraped the ceiling yesterday and am trying to motivate myself to start skim coating today. I’m pretty sure I’ll have to sand a little since I have zero practice with the drywall knife, but a little sanding is better than the popcorn ceiling I did have!

@johnquarles501 2 года назад

Hello Paul, thanks again for giving me the insight to complete my task of shoring up my leaking roof with all of the supplies and technique that I need to finish this job at hand and as a retired ruff framer it's great to know how to maintain a job like this for my own personal needs to complete at hand. 👌

@n.u.ofpalmbay3020 3 года назад

Hi Paul! I love your vids and want to say Thank you for making them! Is this joint compound you are using in this vid the recommended one for pop corn ceiling also? Or is this compound specific to the roller brush method used for this, what appears to be a flat ceiling? Or is this the post popcorn 2nd coat?

@michaeluritescu590 3 года назад

Just started my bathroom and I am not a professional. I am a DIYer and I watched your videos to see if I could make my life easier. My biggest problem was keeping the mud in the center of the mudding knife. The mud kept squishing out the sides of the knife and dropping on the floor. You make it look so easy. I guess with more practice I will get the hang of it. Thanks for the help. You don’t have to skim coat the whole ceiling if your just getting it smooth to paint.

@Cat-with-spear- 2 года назад

Painting contractor and DIYer and this so far seems the easiest method that I think I can successfully attempt!

@kkbroker 2 года назад

You make it look easy. I'm a DIY'er but have done a lot of drywall for both my own homes and friends. Currently I am removing the crows foot from every room in my house (2700 sq ft) and going to try the skip trowel. #drywalltube

@seriejohnson698 Год назад

I couldn’t do it the sand and dust drove me crazy with just one room.

@barunsinhabts3513 3 года назад

You are very hardworking person bro New subscriber 💕 here 👍✋ You are so telented 😮 so ya so beautiful work Love from India 🇮🇳 keep growing 👍

@RutherfordNJDrywallRepair 2 года назад

Thanks so much Paul, loving all your videos and expertise! I did my part to support your channel, it'll help me a bunch on my jobs anyway when the job calls for it, I bought that BEAutiful WEN drywall sander with vac hose attachment on your link ( looking forward to those bigger repairs now ) keep batting those HOME RUNS!

@Sthu2 Год назад

I'm covering 30+ yrs of popcorn ceiling and paint! It was hectic but now I'm going for a smooth finish!

@Angel68LA 3 года назад

#Drywalltube. Thank you for giving me alternative to the mess of scraping off that popcorn texture.

@peterocallaghan2033 3 года назад

scraping off popcorn texture, then skim coating with usg plus 3. low dust compound

@annwingler7107 3 года назад

Thanks for sharing appreciate all your tip. I have popcorn ceiling and I have been removing it and painting my ceilings. I love doing this kind of work.

@susanandrews2294 9 месяцев назад

Well I wish I'd found this channel a lot sooner lol! My current drywall project is mudding and eventually painting a sheet of 4x8 drywall in my ceiling. Turns out that my bathtub plumbing wasn't up to par - a couple sections of pipe weren't even glued. It was only when I replaced the rotted-out bathtub drain to replace it that problems began. So got down and cleaned up all the sodden drywall, had my buddies (former contractors) glue the plumbing and put up a new slab of 4x8 for me. I've done lots of mudding and painting already so have all the tools and knowhow. But I sure didn't know about easing off the corner of the knife to get rid of that stupid line which I always get! Though I am too far along in my project to switch to the roller technique, I will definitely keep in mind. Thanks so much, nothing quite like watching a pro at work! 🙂 ETA one bugaboo I always have...those stupid little corduroy like ripples. Drive me nuts.

@BLACKLACDTS 2 года назад

I was skimming a ceiling today and it was taking too long so I tried this and it speed it up a ton!! Thanks for then help.

@davida357 3 года назад

I watch myself do this quite often... I feel your pain 🤣

@davidleppek1863 3 года назад

Can that technique be used to smooth out a textured wall

@DanielLima-bi3zc Год назад

Im a painter for about 8 years. I want to learn the process to do it at my place hopefully. Awesome video and great technique.

@colincrooky Год назад

I’m 73 and have avoided skimming all my life. The ceiling under my bathroom was soaked, I’ve renewed the plasterboards and was going to use an oil based primer and then wallpaper it. After watching you making it look easy I have decided to buy the primer and wallpaper it - sorry but I should have seen this when I was young with strength. Many thanks, Colin - retired UK Automobile Association patrolman but keen DIYer.

@dalspartan 3 года назад

Have three large rooms to cover popcorn ceiling. Practiced in a small room first successfully, after watching another video you did.

@jessicakern7654 3 года назад

Hey Paul, quick question, can you not use the green bucket for the ceiling like the walls? Thanks!n

@PaulPeck 3 года назад

Hi Jessica, yes you can use the Green lid for ceilings.👍🏻 Thats actually what I used for the first skim coat on this textured ceiling. Here’s the video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xLWTldTAMC0.html I like using the green lid all purpose joint compound when going over textured or painted surfaces because it has a lot of glue in it. So that means it has really good adhesion to those types of surfaces. I hope this helps. Thanks so much for watching and commenting!😎 -Paul

@tsowers1977able 3 года назад

Had to scrape a moldy textured ceiling over the weekend. This video helped me. Thanks for posting

@jimjensen1414 2 года назад

DIY'er here, re-doing a small master bath in a 1960 conc block home, in Jacksonville, FL your video is a GREAT help !!!!

@justincase7937 2 года назад

I've been painting for over 25 years and 22 on my own and I still could never do this as well! I have covered over through the wall air conditioner holes with drywall and mud and smoothed some textured walls that came out well but I have never mastered total wall or ceiling areas! You make it look easy!

@kevinbaxter1571 Год назад

get the really wide level 5 skimming blade. 24 or 32 inch makes this a diy project once you thin the mud enough.

@anothergamingchannel2656 11 месяцев назад

Idk depends on what texture you're doing. Skimming blades definetly help but I've done jobs for people who have attempted to use them and still butchered their job. The thing about drywall is it takes practice. It's not something just anyone can do and have it turn out great in most cases. I've rarely seen homeowners work turn out to be as good as ours. Although it has happened at least once in my career, but it took the homeowner months to do what we could've in less than a week. It was a level 5 smoothwall though in their defense

@marlenesloan4086 3 года назад

Can you do this over popcorn ceiling

@jeremyhorn2670 3 года назад

gotta scrape popcorn off first, get popcorn texture wet with a pump sprayer and popcorn will scrape right off

@terrypacker1192 9 месяцев назад

Wow , thanks for the tip on skim coating !! I am a Pro Maintenance Repair contractor , never seen this method but it's Awesome ! My own house is a H . S. Construction build house , so everyone got to use the hopper , and not all seams were sanded prior to spray n knockdown . So I will definitely use this to redo each room ! Happy to see your video & the speed with the roller method !! Thank You

@QuarterinchoffDIY 3 года назад

Been rehabbing our house for 5 years. 60 years and many layers of paint decided to come off the walls to the bare drywall. So years of scraping and skim coating every surface. This works well when your shoulders are good.

@RawDawgKilla 2 года назад

Buy a 24" level 5 skimmer. You'll be in love.

@RutherfordNJDrywallRepair 2 года назад

he's got that and then some! He's showing to the majority of those that are not in the BIZ and cannot afford to buy all the bigger end tools and have the ability to purchase a 14 inch trowel/ knife. But yeah I get it, I'm a tool head too, just bought a 24 inch skimmer and 36 inch plaster darby and purchased the Wen drywall sander with vac attachment, I JUST GOTTA STOP ( buying now ) lol, what profits?!

@davidmiller4594 2 года назад

With a ceiling, your fingers get cold and numb using knives that large.

@harrisharris9790 3 года назад

I’ve been there and done that

@jlockling3663 2 года назад

Great video. I am a DIY person. I had to play with the mud consistency for about an hour to get a good compound. Thanks for the video

@junehearn2292 Месяц назад

I am so glad I found this video!! I removed the popcorn ceiling in my bedroom and we are having to skim coat it because there are so many problems -- it's a VERY old ceiling. This makes my job look a whole lot easier! Ty ty ty!!

@sammyelliott5554 3 года назад

Undoubtedly the stains on the old part of the ceiling will bleed through the new drywall mud. At some point a stain killer will have to be applied. Any time I remove a texture I do this exact thing. On new ceilings/drywall I glaze the ceiling with a much thinner mud and then spray 1 coat. Painting ceilings with a semi gloss, satin, or eg-shell is a no go. These sheens will highlight all imperfections. Great video.

@DavidSmith-xe3rc Год назад

DIYer here. Good video covering everything I need to do my ceilings. I appreciate your work.

@jongiffen7940 Год назад

Just used this method for around 1000 sq ft. Thanks Paul this saved a ton of time and energy!👍

@PaulPeck Год назад

Fantastic!👍🏻😎

@jamescampbell2829 2 года назад

I did my ceiling after watching this and turned out great, thanks

@kizer-no2kg 3 года назад

Very informative I use a roller and mud for large sections of drywall it very quick and clean.. I do all around construction work 👍

@derrickhorton8897 3 года назад

Just bought some tools yesterday. Gonna try my hand at some repairs on my ceiling in my garage. I sure like this idea of using the roller to get the mud up there. Seems like it would save some shoulder work. Great tip 👍🏼

@derrickhorton8897 3 года назад

Darn I almost bought that level 3 stuff but didn’t. Wish I would have. I just didn’t have anyone to ask advice from lol

@stevenhaley443 11 месяцев назад

I tried this metthod on a ceiling that I had repaired. It worked great! Thanks for the video.

@PaulPeck 11 месяцев назад

That’s awesome!💥 Thanks so much for your feedback.👍🏻😎

@rottenfathers 2 года назад

A DIY lady 65+ with a couple of ceiling repairs: 1. water damage in kichen and 2. an ugly crack in LR where someone in attic must have stepped through. Also want to flatten out LR stomp texture but whether I'm up to that job is questionable! Terriffic videos. You are a super teacher and pleasant to listen to. Thanks.

@yesdeere1376 3 года назад

I’m a building maintenance supervisor for 8 years now and commercial HVAC tech for the 15 years before that. Also a DIY guy. I sucked at drywall until the job I’m at not. Trial and error changed that and I’m pretty confident now. Had water leak and damage to my basement ceiling at home and was looking at texturing videos to get it back to normal now that everything is fixed. The Sheetrock I replaced was basically an entire 4x8 sheet. Going to skim coat and re texture. Thanks for the guidance man👍🏻subbed. #drywalltube

@paulvannoy8872 8 месяцев назад

I’m a DIY guy and I’m really liking your videos. I especially like how you voice over allowing the video to be all watching you work.

@PaulPeck 8 месяцев назад

Thank you. I really appreciate you watching and commenting!💥👍🏻😎

@dhoyt1967 3 года назад

I'm a DIY homeowner. I live in Florida and I have faulty AC ducks that drip water in my ceiling. I have cracks on the tape line and discolored on other spots. I'll be replacing the AC ducks and then fixing the drywall myself. I can't afford to hire someone so I do what I have to. Great video.

@jesusaboyyes4413 3 года назад

My guy with the skills I have with patch work and what not I know for a fact just learned how to skim coat 😎 Just subscribed to brody 💯

@flatcapfiddle Год назад

I'm a painter. This stuff is really useful especially the pressure on the right light on the left.

@destijl7414 3 года назад

Excellent! The roller apply is a great time and neck saver.

@callemdavies8992 2 года назад

This was exactly what I needed mate, thanks. I'm doing a wall as opposed to a ceiling however, but the method is still applicable.

@stevepearson566 2 года назад

Thanks for the videos Paul, I’m just learning how to do drywall repair work, I used to just pay someone but your how to videos have been great learning tools for me

@GB-ue6wr 2 года назад

I’m doing my sons sons room which looks identical to the room you are working on. I cleaned the pop corn off today, and will try the roller method for applying the mud! Thanks!

@billrobert3226 Год назад

thank you. been screwing up drywall my whole life and videos like this get me one step closer to doing it right the first time one day

@anothergamingchannel2656 11 месяцев назад

Don't beat yourself up. Drywall is like art. It's something that takes lots of practice to get right

@599Dan 3 года назад

Great technique I'm sure it could be used on walls as well to get rid of nail pops imperfections and just for General refresh excellent video. Thanks for the tip Sup

@fastlanetechnologies2512 2 года назад

Doing the drywall project in my forever home following your technique. Finishing my basement now about a 40 sheet job

@funbrothers5457 3 года назад

hi Just watched this tutorial , im an ex painter d.i.y er and love plaster work , keep them coming thank you Paul : )

@jrdnhsnbrg Год назад

Hey Paul - DIYer here getting my hands (and arms, and clothes, and everything) dirty in my first ever drywall work. Badly damaged drywall in my finished attic that needed new tape on most points and a full skim coat. I got the first coat done on all of the walls and am about to get working on the ceiling. I'm not as good as you (obviously!) so I'll be sanding after the 2nd coat and spraying orange peel texture then too. Thank you for the tips!

@justanotherfan18 2 года назад

Glad I came across this, had removed popcorn ceiling from my small guest bathroom, was hell on my neck and shoulders. Now need to do another medium size bathroom and won't be removing instead skim coating! Thanks.

@tomduer2744 2 года назад

I'm a DIYer. Took out some non load bearing walls in our master bedroom closet to open it up and had an electrician put in some can lighting. So, I'm planning on skim coating the ceiling in there.

@lono2200 11 месяцев назад

Thanks Paul, for sharing your knowledge and wealth of experience from over 25 years in the game.

@powerpaul08 3 года назад

DIY-er. I enjoy doing lots of upgrades and projects. About to do this on a friend's popcorn ceiling (living and dining room.) Thanks for your tips!

@johnjones9017 3 года назад

Great job bro.. Cant wait to see more of your videos. I've done home repair for many years and always looking for many ways to work out the repairs. Oh and you got new subscriber

@markseeger394 3 года назад

That’s real talent!

@sopurdie3826 2 месяца назад

Just removed 900sq ft of popcorn from my ceiling. All the other videos I watched had me feeling reluctant and tired of the job ahead, but you just gave me hope! Thank you!

@chrismoore9997 3 года назад

DIY - done a lot of renovation work where I removed the dry-wall worked inside the wall and put the same board back up.

@AUPackmule 3 года назад

Lookin good my man. Great info. I always leave learning something

@ronnieyoung9688 3 года назад

I,m doing a popcorn ceiling that was painted. Thanks for this video. It helped out a lot.

@Mahagony1985 2 года назад

Did you use a roller? How did it turn out ?

@christosmanthos1248 3 года назад

That's is the best way to apply skim coat, amazing

@charlesmcneiljr5170 2 года назад

Thank you Paul. How long did it take you to get better at skim coating ceilings? When you first started out did you have to sand?

@abacab87 2 года назад

I've started doing this on everything. Walls, ceilings, etc. I think once I get some experience, it will be just as fast as just doing the seams, and I have a better end product. Putting the paper tape on is what slows me down.