Тёмный

How to Solder Copper Pipe - DIY How-To Basics 

SSLFamilyDad
Подписаться 316 тыс.
Просмотров 194 тыс.
50% 1

Check out this video to learn some basic soldering skills that can be utilized in so many ways around your homestead. Adding new sinks, fixing leaks, repairing hose bibs, adding new hose connections, upgrading water supply lines, building a boiler, additions, new home construction, and so many more! In past experience I worked as a residential heating and cooling installer and learned so many valuable skills from that job. Although I did not make it a career I can take what I learned there and apply it to our homestead moving forward. Throughout our journey to becoming more self sustaining and self reliant I will be sharing any of these basic skills that I feel may benefit someone else out there looking to do some of these very same things.
Being able to repair your own plumbing and install new plumbing fixtures is a skill I think that every home owner should know. It starts with picking up a few basic tools that you will never regret getting. I have a list of some of the items that I use at the bottom of this article. A good torch, pipe and fitting cleaner, solder, and flux is about all you really need to get started. Once you have what you need grab a few scrap pieces of copper pipe and a few fittings and solder a couple of joints following this video. You will quickly be able to get the hang of it and be ready to take on any repair or plumbing project in your home.
In an upcoming article/video I will be installing a utility tub in our basement and running the water supply lines. We are getting ready to have a place to clean fish and also handle other cleanup from various projects around the homestead. I was surprised when we moved into this house that there was no utility tub in the laundry area or basement and I have finally gotten a chance get one put in.
I hope that this video has encouraged you to take on some of your own plumbing projects and as always please let me know if you have any questions!
Spark start torch head - amzn.to/1BMl54f
Mapp Gas cylinder - amzn.to/14G5DdF
1/2"-3/4" pipe and fitting cleaner combo tool - amzn.to/1BSy2ao
Tight spaces pipe cutter - amzn.to/1y0INKD
Pipe cutter - amzn.to/1xP2qDj
Lead free solder - amzn.to/1wGPqvL
Flux - amzn.to/1yPxXqA
All of these products and more recommended items from the SSL Family are available at the Simple Suburban Living General Store - astore.amazon.com/simpsubulivi-20
For more information and other sustain projects and how to's please visit www.simplesuburbanliving.com
Follow us on......
/ simplesuburban
/ simplesuburbanliving
/ simplesuburban5
/ simplesuburbanliving
Music - "River Went Dry" by Josh Woodward. Free download: joshwoodward.com/song/RiverWen...

Игры

Опубликовано:

 

24 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 103   
@paulwharton1850
@paulwharton1850 6 лет назад
Easily the clearest, most detailed tutorial on how to properly solder copper pipe. You know how to teach well - I learnt a lot. Many thanks !
@zylonandtamponhead
@zylonandtamponhead 4 года назад
well put, was the thinking the same
@KB-cu7yr
@KB-cu7yr 3 года назад
Great info and presentation. I was hesitant about fixing the feed to my sprinkler system but I feel pretty confident. Thanks.
@Ismael72110
@Ismael72110 8 лет назад
nice video thanks for sharing !!! I have seen dozen of youtube videos and everybody say clean you copper pipe before solder but nobody explain why until now .. i learned something new
@fortunatogutierrez1524
@fortunatogutierrez1524 7 лет назад
Handyman1914
@charleswilson4598
@charleswilson4598 7 лет назад
I have watched several videos lately on soldering copper pipe and this one is one of the best I have seen. Good clear video and also good clear explanations.
@oldpup4810
@oldpup4810 9 лет назад
A trick I had to use once when repairing a burst section of pipe that was horizontal and keept getting just enough water in it that it wouldn't heat properly. Rolled a tight ball of bread and stuffed it in the side the water was coming from. Heating the pipe toasted the bread to the point it passed through and I was able to get the solder applied properly. :)
@SSLFamilyDad
@SSLFamilyDad 9 лет назад
Excellent advise! I have used that trick as well and the nice thing is that the bread breaks down and will come right out the faucet. Thanks for the tip!!
@func1775
@func1775 9 лет назад
Just found video.... You make it look easy thanks for the boost in confidence.
@OldSchoolHacker
@OldSchoolHacker 4 года назад
Well done my friend. You are a gifted teacher.
@standupforwhatsright4168
@standupforwhatsright4168 3 года назад
Explained well.Good job bow.👍👍
@pumareyes1
@pumareyes1 8 лет назад
One of my fittings just sprung a pin leak on a copper pipe. Your information is invaluable my friend, thank you.
@SSLFamilyDad
@SSLFamilyDad 8 лет назад
+pumareyes1 glad it helped you out man
@riseabove3082
@riseabove3082 6 лет назад
Great video. Great tutorial. Thank you so much!
@madviking1320
@madviking1320 4 года назад
Nice work and good explanation. Thanks for your time!
@ProplumberbrisbaneAu
@ProplumberbrisbaneAu 7 лет назад
Attention to detail. Love it.
@Maggie-Gardener-Maker
@Maggie-Gardener-Maker 4 года назад
Absolute best comprehensive super simple instructions and tips I've seen anywhere for how to sweat copper joints! Thank you!
@earltriplett7085
@earltriplett7085 2 года назад
Great Video! Very down-to-earth and easy to follow.
@melvinlara-falcone2362
@melvinlara-falcone2362 5 лет назад
Love your videos you're very patient showing step-by-step 2 DIY I've been a plumber for 22 plus years I have work with people and scene other videos and they're not very patient with people out there who are DIY thank you again God bless you friend.mel Lara falcone. Plumber and drywall
@angeliamichael4647
@angeliamichael4647 8 лет назад
Very very good explanation of solder and flux methods. God bless!
@SSLFamilyDad
@SSLFamilyDad 8 лет назад
Thanks! God bless you as well!
@kirkzaro4816
@kirkzaro4816 8 лет назад
Thanks. I really appreciate the instruction. Easy to follow, simple, and straightforward. Installing first water heater in my first home two days from now. Will use this. thanks. KZ
@shanerice2169
@shanerice2169 5 лет назад
Great video. Very clear and helpful. Thanks!
@paul8131962
@paul8131962 8 лет назад
Another great video, thank you.
@videoswitch
@videoswitch 3 года назад
Very good video. Nice speaking and to the point.
@johnbower
@johnbower 7 лет назад
Nice to see a job done properly.
@jkatvcr
@jkatvcr 4 года назад
great video! thx for sharing.
@gilalto2863
@gilalto2863 8 лет назад
Very helpful. Thanks so much
@SpeakerWiggin49
@SpeakerWiggin49 6 лет назад
Very useful video, thank you
@michaeltemple895
@michaeltemple895 2 года назад
Great video!
@lakmalantony8505
@lakmalantony8505 7 лет назад
This is Awesome ! Thank You
@andrewconlow5627
@andrewconlow5627 7 лет назад
Thank you for this video!
@kenthomas2252
@kenthomas2252 7 лет назад
Thanks, So helpful.
@arubariba
@arubariba 8 лет назад
amazing bro thanks for the great tips
@Alexacostaphotograph
@Alexacostaphotograph 8 лет назад
I learned a lot about welding copper pipes today, thanks!
@azmendozafamily
@azmendozafamily 8 лет назад
this is soldering, not welding
@gedman9527
@gedman9527 2 года назад
Soldering my friend 👍
@MrDougHancock
@MrDougHancock 9 лет назад
Thanks for the video and the later bread tip. The first pipe a tried to solder had a very slight water leak and so I failed. Nearly gave up this technique. You have given me the confidence to retry it.
@SSLFamilyDad
@SSLFamilyDad 9 лет назад
Doug Hancock Glad to hear it! I have been doing this for years and every once and a while I get a leak also, after you do it a few times you will be a pro!
@zylonandtamponhead
@zylonandtamponhead 4 года назад
goat diy indie upload ever, thanks!
@suburbanplantation1770
@suburbanplantation1770 9 лет назад
Just found your channel and really enjoy it. I'm waiting for spring to come. Marc from west falls ny
@SSLFamilyDad
@SSLFamilyDad 9 лет назад
Awesome! Thanks for joining us. Looks like you have been getting some of this cold and snow also so you and I will both be happy when it is spring!
@joshmaster618
@joshmaster618 8 лет назад
Good video man really helpful basic information feel way more confident
@gortnewton4765
@gortnewton4765 8 лет назад
Very nice job. Good instruction, this will be very helpful to me. Thank you. Nice Biblical quote too, thanks again.
@SSLFamilyDad
@SSLFamilyDad 8 лет назад
+Gort Newton Glad I could help!
@antihillsfilmsteam
@antihillsfilmsteam 6 лет назад
Nice tutorial. You gain a. Subscriber. Thanks.
@johnshea8826
@johnshea8826 8 лет назад
Something I encountered on my first sweat job was that the pipe never fully seated into the fittings on the first try; it would go in barely 2 or 3 mm and stop. Flux as lubricant didn't help that much either. I was surprised at how much material I had to remove with sandpaper in order to get a tight friction fit that inserted all the way into the joint. If this happens to you, don't get discouraged and allocate more time for your project. Consider breaking your big project into two phases. I ended up putting plugs on the supply lines to get back to it another day. Great video. Helped me immensely.
@SSLFamilyDad
@SSLFamilyDad 8 лет назад
+John Shea great advise, it sometimes depends on the fittings. Some of these fittings are being manufactured in China and they are garbage. Look for made in us fittings and they should fit right together
@MobinSG
@MobinSG 4 года назад
Thanks alot 👍 🦋
@antwannn111
@antwannn111 6 лет назад
Thanks a lot man!
@delightedbylight9893
@delightedbylight9893 5 лет назад
Thank you !
@brownjackie8
@brownjackie8 8 лет назад
Liked the video. My Dad is going to test me tomorrow and I think I will be able to get him to let me solder a joint so I can use the outside faucet.
@SSLFamilyDad
@SSLFamilyDad 8 лет назад
+Jackie Brown good luck!
@LibertyDIY
@LibertyDIY 7 лет назад
You can get those fitting/pipe brushes for $2 at harbor frieght but coarse steel wool works great
@johnson1573
@johnson1573 7 лет назад
good job
@jaimecarbone6580
@jaimecarbone6580 4 года назад
Thumbs up! Wonder if it;s better to use Mapp Gas vs Propane in order to get a better soldered joint?
@ShowYouOnceAgain
@ShowYouOnceAgain 7 лет назад
im contemplating having the plumber run hot water through a copper creation i want to hang on the bathroom wall as a towel warmer. now i dont feel scared to try making the copper creation and he can just connect it to the shower hot water... it works perfectly in my head hahahahaha
@HawaiiSurfer2008
@HawaiiSurfer2008 7 лет назад
At 7:09 you mention that you want to try and keep the elbow at an angle while soldering. What is the benefit of soldering it at an angle? Thanks for the great video.
@DanielGarcia-ky7cp
@DanielGarcia-ky7cp 8 лет назад
thanks
@bubblekuku5992
@bubblekuku5992 6 лет назад
in UE flux is with metal portion SN and CU in mixture and paste have color grey,witch is good simple flux-yellow or with particles metal?
@plumbserve3648
@plumbserve3648 7 лет назад
Good Video dude only pointer when your soldering you need to ensure that there is pipe in both ends of the fitting otherwise when you come to solder the other end the solder will not run correctly causing a leak which nobody wants haha also i was taught never apply flux inside the fitting because the more acidic fluxes aka laco will eat through the pipe causing it to pinhole not to bad if you can flush the system out but on gas pipework its a big no no :)
@SSLFamilyDad
@SSLFamilyDad 7 лет назад
great points!
@lasvegassal9322
@lasvegassal9322 6 лет назад
Personally I like to start from the bottoms the sides the cap the top off. That’s how i was Taught In apprenticeship school.
@azmendozafamily
@azmendozafamily 8 лет назад
could you show a video with a vertical joint, cup on bottom and cup on top?
@rogerwhiting9310
@rogerwhiting9310 2 года назад
I like to wipe the solder drip to remove the spot it leaves as it hardens.
@No1carpetcleaningmelbourneAus
@No1carpetcleaningmelbourneAus 6 лет назад
Great
@TheWoodWerker
@TheWoodWerker 7 лет назад
GREAT Video! I'm very New to soldering copper! If I want to join two copper sheets (approx. 1/16" thick) would I need to SOLDER or BRAZE for a structural joint? I'm interested in learning this from an artistic standpoint. I would appreciate ANY help or information! Thanks In Advance! Have A Super Week!.....Gus
@SSLFamilyDad
@SSLFamilyDad 7 лет назад
+TheWoodWerker that sounds more like a brazing application. Solder is too running whenever heated and would probably just leak through the joint
@somewhereusa9602
@somewhereusa9602 8 лет назад
Thanks for posting this video. I only have the regular propane torch, and only have some experience, not that much). Any recommendations, regarding the reg propane (instead of the MAAP gas) torch? Thank you. Last week, I've installed a new frost free hose bib. But at one of the 45º connections inside the house (basement), one side weeps/leaks. Is it possible to just re-heat one side of that fitting to get more solder into the joint? Or do I need to remove that fitting and clean/score/flux and solder from scratch? (I'm bummed about this mistake I made, as replacing that fitting seems difficult). Any suggestions welcomed. Thank you again. td
@SSLFamilyDad
@SSLFamilyDad 8 лет назад
+Somewhere Usa propane torch should be ok. You will have to drain all water out of the line somehow ad it won't heat up with water inside. You can reheat and resolver the joint sometimes but it is always best to take it off, clean it up, and Re solder it unfortunately
@somewhereusa9602
@somewhereusa9602 8 лет назад
Thank you for your advice and video. God Bless. td.
@mikee.7316
@mikee.7316 7 лет назад
Good job. Is there a rule of thumb for how much solder you use for the various diameter of tube?
@SSLFamilyDad
@SSLFamilyDad 7 лет назад
+Mike e. Not really, just enough to get all the way around
@brewsterly2927
@brewsterly2927 6 лет назад
Some say 1/2 inch solder for 1/2" joint etc.
@804186443
@804186443 8 лет назад
How can you prevent threads with a pipe cutter? I have a husky pipe cutter and every time I try to cut a p trap it spins out of its original line Great video
@SSLFamilyDad
@SSLFamilyDad 8 лет назад
Sometimes those cheap cutters get loose guide wheels and the start the cut crookes. Tighten it very slowly after spinning a couple of times to prevent. Otherwise buy a better cutter
@russor22
@russor22 7 лет назад
804186443 ridgid or lenox....forget husky
@dalisabe62
@dalisabe62 7 лет назад
what is the secret to having a nice even solder melt in between the pipe and the fitting without applying the solder thread around the full circle?
@SSLFamilyDad
@SSLFamilyDad 7 лет назад
heat the opposite side of the fitting, not the pipe. This "draws" the solder in and around the joint
@jerryb19531953
@jerryb19531953 7 лет назад
Can you just put solder around joints that are leaking without cleaning them. Just putting new solder over the old. Thanks
@SSLFamilyDad
@SSLFamilyDad 7 лет назад
not really, it needs to set in between the pipe and fitting to make a good seal, also old solder rarely sticks with the new
@jerryb19531953
@jerryb19531953 7 лет назад
Thanks ssl.
@eridtg
@eridtg 8 лет назад
if u clean your fitting to quickly you can crack the solder also shouldn't you wait until it cools a bit?
@SSLFamilyDad
@SSLFamilyDad 8 лет назад
I suppose that is possible but I used to stick them right into a bucket of water to cool them and I don't remember having and cracks but it has been awhile
@eridtg
@eridtg 8 лет назад
+SSLFamilyDad putting it in a bucket of water is fine just the aggressiveness from wiping the pipe down could cause a leak
@Frankyouknow
@Frankyouknow 8 лет назад
Is there risk of a fitting moving when wiping it with a rag after sweating it while it is still hot?
@SSLFamilyDad
@SSLFamilyDad 8 лет назад
+Frankyouknow as soon as you take the heat off it becomes rigid, it shouldn't move at all
@Frankyouknow
@Frankyouknow 8 лет назад
+SSLFamilyDad Thank you.
@bfd117
@bfd117 8 лет назад
Can u just add solder if you find that you have a leak?
@SSLFamilyDad
@SSLFamilyDad 8 лет назад
You certainly can but what happens sometimes is you get resin buildup on the copper and the solder won't stick. In that case you just need to take it back apart and clean it all up and resolder it again.
@Monkeywrench864
@Monkeywrench864 7 лет назад
I wanna see you do a video on soldering copper pipe in a wall without burning it.
@SSLFamilyDad
@SSLFamilyDad 7 лет назад
I did this with the utility sink install I did if you search for that vid on my channel. I use an old license plate or piece of metal to slip behind the joint, also, try and get your torch behind the joint and point the flame to the side as much as possible.
@Monkeywrench864
@Monkeywrench864 7 лет назад
I make a little device called the "Solder Snake", as pictured in my name. The first hands free reflective heat shield.
@bangmasse3644
@bangmasse3644 8 лет назад
it it food grade?
@SSLFamilyDad
@SSLFamilyDad 8 лет назад
+rahman massewwa copper? Yes
@coops9871
@coops9871 5 лет назад
What is soddering
@matthewkromer9256
@matthewkromer9256 7 лет назад
you never reemed the pipe new guy
@rukihita1199
@rukihita1199 Год назад
6k
@ChaserXaviour
@ChaserXaviour 7 лет назад
Soldering paste. Them bastards sold me the wrong thing.
@jbphonejones32
@jbphonejones32 9 лет назад
Revelation 1:14-16 the color of JESUS Christ !!!!
@gabrielM1111
@gabrielM1111 7 лет назад
How to basic? No eggs?
@eye80west
@eye80west 8 лет назад
well done video!
@DanielGarcia-ky7cp
@DanielGarcia-ky7cp 8 лет назад
thanks
Далее
How To Solder Copper Pipes Like A Pro
11:56
Просмотров 551 тыс.
Basic Soldering Lesson 1 - "Solder & Flux"
20:45
Просмотров 1,8 млн
How to Solder Pipes in Walls or Floors
12:46
Просмотров 46 тыс.
1752 A DIY Sand Battery - The Theory, Practice And Use
12:13
How to Solder Copper Pipes & Avoid Leaking Water
11:07
Просмотров 392 тыс.
How to Tee into Copper Pipe THE EASY WAY
12:21
Просмотров 129 тыс.
6 SOLDERING MISTAKES ON COPPER PIPE
11:49
Просмотров 162 тыс.