No video :(

How to Solve the Pressure Washer pressure problems

Подписаться 31 тыс.

Просмотров 520 тыс.

50% 1

In this video, I show you the number one problem with pressure washers, why they lose pressure, and how to solve the problem. I've read many complaints about the Ryobi pressure washer (and other models, too), and most say that the unit works for a bit, then stops working. You'll learn the number one fix for this problem in this video.
Get items in this video at Amazon:
Ryobi 2,000-PSI Pressure Washer: amzn.to/2SpAJkk
Ryobi Surface Cleaner: amzn.to/36BlgWC
Pressure Washer Pump Guard fluid: amzn.to/3ncnSjL
Dewalt pressure washer nozzles (these work even better): amzn.to/36qtl0x
Check out my other pressure-washer related videos:
Ryobi 2000-PSI pressure washer review: • Ryobi 2,000-PSI 1.2 GP...
Ryobi Surface Cleaner Review: • Ryobi Surface Cleaner ...
Pressure Washer Pump Maintenance: • How to Maintain Your P...
Solving Pressure Washer pressure problems: • How to Solve the Press...
How to work faster with a Ryobi Surface Cleaner: • How to Use the Ryobi S...
#locksmith #locksmithing101 #locks #luggage #security #lockpicking #lockpick #lockpicks #survival #travel #sailingtechniques, #sailingskills, #sailingknots, #sailingknottying, #sailingropehandling, #campingknots, #rockclimbingknots, #survivalknots, #knotsforprepping, #knotsforpreppers, #climbingskills, #mountaineering, #mountaineeringskills, #prepping #prepper
--------------------------------------------------------------------------------
Get items from this video at Amazon:
► BOOKS
Adventure Expedition One: amzn.to/3xhG0gE
Antarctic Tears: amzn.to/2SJGdoH
How to Keep Your Feet Warm in the Cold: amzn.to/3mvBrZS
Jackson Hole Hiking Guide: amzn.to/36bdsK6
Lost at Windy Corner: amzn.to/2EEZN0K
Mountaineering: The Freedom of the Hills: amzn.to/3qxq5Ku
The Most Crucial Knots to Know: amzn.to/3bCvGa3
2024 Total eclipse guides: www.totaleclip...
► BOOKS IN EUROPE:
Antarctic Tears: www.sastrugipr...
Lost at Windy Corner: www.sastrugipr...
Adventure Expedition One: www.sastrugipr...
The Most Crucial Knots to Know: www.sastrugipr...
How to Keep Your Feet Warm in the Cold: www.sastrugipr...
► SHOWS
World Beyond at Amazon: amzn.to/3u6o1by
Antarctic Tears film: amzn.to/3hu8I7p
► EMAIL LIST
Join my mail list to learn about my latest updates and releases here:
www.aaronlinsd...
► ABOUT AARON
Aaron Linsdau is a bestselling #1 author on Amazon.com 🥇
All links are Amazon affiliate links. I earn a tiny bit when you use the above links to help support my channel. It costs you nothing but supports me bringing high-quality content to you. Thank you!
ice axe, glacier, everest, denali, climbing, mountaineering, adventure, expedition, cold, double boot, triple boot, camping, backpacking, traveling, trekking
--------------------------------------------------------------------------------------
Visit my website at: www.aaronlinsda...
► Subscribe to my channel here: www.youtube.co...
Support this channel here:
www.paypal.com...
/ alinsdau
venmo.com/aaro...
-
► SOCIAL MEDIA
RU-vid: / alinsdau
Instagram: / alinsdaupolar
Facebook: / alinsdau
Linkedin: / alinsdau
Website: www.ncexped.com/
Twitter: / alinsdau
World Beyond: www.worldbeyon...

Опубликовано:

17 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 518

@carolharbin1574 Год назад

I am so happy that you took the time to explain this. I've never used a pressure washer, and I finally purchased one. I had serious issues with the air built up in the hose. I am a single woman over 50 and had no idea what I was/am doing. Now that I finally located your video, (not easy to find online). Maybe because other users know what they're doing. 😂 Thanks so much.

@ALinsdau 10 месяцев назад

Thanks for watching!

@revisionistcrap211 4 месяца назад

Ditto Carol. 50 something single woman playing with a pressure washer. After the water hose connection on the tap came loose I couldn't get the thing to work again properly, thought I killed it 🤣. Thank you Aaron!

@1clkvideos 3 года назад

Great explanation. Here’s what I’ve done to minimize the time spent running air through my machine: I installed a quarter-turn shutoff valve at the end of my water hose, so I turn on my water and run all air out of water hose, then I shut off water with quarter-turn valve at hose end. Then I just attach water hose to pressure washer, open quarter turn valve, then I bleed air through pressure washer / hose before attaching wand assembly - this procedure moves the air out very quickly.

@ALinsdau 3 года назад

Great tip!

@wicklowabby7977 3 года назад

How TF does this comment have only one like? And it's from me.. what the Creator didn't deem it like worthy?

@ccreed50 2 года назад

I'm likin' it. Infact, Imma do it.

@frankplacido368 3 месяца назад

I can’t believe that there are people who haven’t done this!

@bluentan1384 Месяц назад

Thank you Lord for allowing me to find your video!!! You’re a blessing! We got so discouraged when it sounded like the pump wasn’t working after we even thought we primed it sufficiently! You sir are appreciated!!!!

@ALinsdau Месяц назад

Glad it was helpful!

@lynnjones6386 3 года назад

Wow! I was afraid my pressure washer was broken, but this explains it quickly and how easy it is to fix the problem. Thank you sooo much

@Eternal_11_Sasha 2 года назад

Same!!!!

@ALinsdau 2 года назад

Thanks for watching & subscribing!

@Grey_Ghost_GX 2 года назад

Same!

@rajmohann Год назад

Same here!!

@davetaylor528 Год назад

I was looking for a video on my power washer to help me tare it down and try to fix it ,but luckily for me and my machine I found this video instead. I won't hesitate to go to wrenching on it but I'm going to try your idea first. I didn't know it could take that long to purge. Thank you you may have saved me and my machine.

@ALinsdau Год назад

Great to hear!

@RoamingShark 3 года назад

Wow, Alinsdau! You just saved me buying a new pump for pressure washer I use on top of my Dock. I attached a Y connector to the Pressure Washer let the air bleed out then turned it off and opened up the one connected to washer. Instant pressure! Appreciate you man!

@ALinsdau 2 года назад

Thanks for watching & subscribing!

@terryh985 2 года назад

@RoamingShark Came across this video last year and it saved me from buying a new pressure washer because I thought the pump was crap. My problem is having patience to stand there for five minutes every time I use it (100 ft hose). Your Y connector suggest is "Gold". Just ordered one from Amazon.

@larryfriedberg9851 2 года назад

Question..Forgive my understanding here. How are you purging the air from one side? It seems like it's open(with nothing connected to it) than turned off. Meanwhile the water source is connected to the other side and is just waiting to be turned on. Another question..does limiting the pass thru from a 3/4 inch hose thru the smaller valve ball reduce the amount of water (GPM)going to the washer itself? Thanks.

@irishtwin6146 3 года назад

Wow, I’ve looked everywhere for a solution and thank goodness I ran across your video because I was ready to put my 1yr old power washer to the curb! Thank you! Thank you!

@ALinsdau 3 года назад

Glad it helped!

@mosesjonathan1240 3 года назад

Pro trick : you can watch series at flixzone. Been using it for watching lots of of movies recently.

@dangelojustus3337 3 года назад

@Moses Jonathan yup, have been using Flixzone} for since november myself :D

@marceloterrance3532 3 года назад

@Moses Jonathan Yup, have been watching on flixzone} for since november myself :)

@MrEmarioyoshibro Год назад

UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust ru-vid.comUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.

@ALinsdau 10 месяцев назад

Great!

@williamumstetter8518 4 месяца назад

Thanks so much for this. We could not power wash last year due to illness so it has been 2 years and everything you showed was what was going on. I had to take plyers to get the tip off but once I did, the machine came alive. It was just as you said. Thank you.

@ALinsdau 4 месяца назад

Excellent!

@mikem6213 2 года назад

Nice vid. Thanks. I will mention that I've found that my older gas powered pressure washer has trouble starting with full water pressure, so I had to do it a little differently. I run the hose to release the air , then with water running and air relieved, I loosely attach the hose to the unit, start the motor and then tighten the hose fully. This works great for me. Again, thanks!

@ALinsdau 2 года назад

Great tip!

@slowjamcdub Год назад

Good idea!!!

@jf8250 Год назад

2 minutes was all it took before full pressure. Thank you so much!

@ALinsdau Год назад

Sweet.

@Daanial1234 3 месяца назад

I've had this issue, wanted to return it, watched your video and now it's working like new again... Thank you so much! 😊

@ALinsdau 3 месяца назад

Great to hear!

@Fast333i Месяц назад

Life saver. Was about to take my newly bought toy back to the warranty until I watched this video. Super helpful 👍 Edit: I was so eager to find out if this solution actually works that I got up at night to test it myself

@ALinsdau Месяц назад

Great to hear!

@kellineal5369 2 месяца назад

Thank you for this information! I thought my pressure washer was broken but after following your instructions... it's working again!!

@ALinsdau 2 месяца назад

Thanks!

@johnfoley2243 3 года назад

Great Video and thanks for the tip. ALSO, thank you for getting straight to the point and NOT spending the first few minutes babbling (like over videos by other people).

@ALinsdau 3 года назад

Thanks.

@aquariuswithfire 2 года назад

Can't be stressed enough that all air must be purged before putting on a pressure tip. I like to put the feed hose on loosely, turn on the water at the house and back the hose nut off as far as I can with out it coming off to purge most of the air from the feed hose. Depending on how long your feed hose is it can save 5 -10 minutes evacuating the air. Take the time it takes to do it right and the unit will last a long time. Great video.

@ALinsdau 2 года назад

Great pointers, thanks.

@stephenlo5142 Год назад

It’s amazing that those who made the machine do not explain what happened or suggest some precautions. Thank you for explaining.

@ALinsdau Год назад

Thanks for watching!

@e_g7736 3 года назад

Thank you! It helped me! I was waiting for 30 seconds, how it was specified in documentation. But the device stopped working after several seconds. I tried to delete the nozzle and let the water go for 5 minutes. After that the device started working properly.

@ALinsdau 2 года назад

Thanks for watching.

@bricewilliamson1124 7 дней назад

The GODS just saved my Husqvarna 2000 electric pressure washer and saved me about $500 . I was about yo trash it and buy a gas unit. Thank you my guy. I have been toying with this thing for about an hour in the yard. I tried your suggestion and bam! Water works and the pump is humming like a bird

@jacobsharp4985 3 года назад

I was just about to take my ryobi pressure washer back for warranty work for this same issue but your video helped me out. Thank you

@ALinsdau 3 года назад

I hope it helped. Thanks for watching.

@Gque_ Год назад

Ok I’m about try this today. I thought I was headed to the store to buy another one. You may have just saved me a few dollars. Wish me luck.

@ALinsdau 9 месяцев назад

Best of luck!

@waterhead1027 Год назад

The machine is brand new, and you helped me learn how to troubleshoot it. It primed, but still wouldn't work when I attached the wand. The reason was that the person I had loaned it to returned it with the tip clogged and the coupler seized up with gravel. At least it didn't cost me any $$$. Thanks!

@ALinsdau 2 месяца назад

Sure thing.

@robertmachen4364 2 года назад

Thanks for the video. I've been dealing with this issue for years but just ignored it. Thought it was the pump. The demo was great because it is exactly the same thing. I'll purge the line extensively from now on.

@ALinsdau 2 года назад

Best of luck!

@richardefriend 2 года назад

Here's a trick I've found that eliminates most of the air problem: add a hose shut-off valve to the end of the hose that goes into the washer, and turn it to shut before removing the hose (and I also have a quick release connection that goes between the valve and the washer). That way, the water doesn't squirt all over the place when the hose is removed, and there's hardly any air in the hose when you go to reconnect the hose.

@ALinsdau Месяц назад

Great pointer!

@ymg200 28 дней назад

Right on the money! I always flush water through the washer for about a minute to make sure that the pump is filled with water before I power it up. However, sometimes that's not enough and air bubble is still there when I use a 100' hose. If I experience a pressure drop and the pump reving like in this video, I power off the washer and flush more.

@s.androsko3093 2 года назад

Your videos are super helpful. I have this unit and ran into this very problem yesterday. My frustration was eased by your video and I can't wait to go out and fix my problem/not a problem. Thanks!

@ALinsdau 2 года назад

Best of luck!

@josephcallahan5496 Месяц назад

Good job bro! You're the man. I haven't even done it yet but I know it that's what it is. You know I kind of thought maybe it needed to be primed because it didn't start right when I hook the hose up. I was going to try that anyway but now I know for sure thank you

@ALinsdau Месяц назад

Thanks!

@jasonchewy 3 года назад

You should really end your video showing you actually fixing and seeing after the fix how it sustains the pressure.

@ALinsdau 3 года назад

Thanks for the comments.

@ZenLillyPhoto 7 месяцев назад

Thank you, thank you! I was just about to give up. Your advice worked perfectly and I was able to finish the job.

@ALinsdau 7 месяцев назад

Excellent!

@shaylawaite3508 3 года назад

Thank You. I was cursing about my water pressure machine not working and then I watched this video! Operator error! Now I’m off to buy a new one.

@ALinsdau 3 года назад

Good luck!

@lamplighter2085 18 дней назад

bought a ryobi PW pressure today pressure is surging was going to return tomorrow, I'll purge the air and try again, thanks for the tip!

@ALinsdau 15 дней назад

Good luck!

@lamplighter2085 14 дней назад

@@ALinsdau It worked I turned on the machine and ran water without the tip on the wand it took about a minute it burped twice, now works perfect thanks much

@nicknoyb8067 Год назад

Thanks man! This saved my day. Short, to the point and the information I needed.

@ALinsdau Год назад

Glad to hear it!

@ISoldierSideI 2 года назад

So, I thought I broke the company pressure washer, because I had to disconnect it and move it. Reconnected and turned it on and it was making those god awful sounds. I got depressed and sat in my car. Then went on RU-vid and found this video. You helped put me at ease knowing I did NOT break a $2000 machine. I went back inside and just let it run for a good few minutes. So. Much. Air. Working fine again. Thanks so much.

@ALinsdau 2 года назад

Wonderful!

@patriotjedimaster1450 3 года назад

Great informative video. I had this problem yesterday and was trying to think of a better way to remove air. What if we put a ball valve on the end of the hose, ran the hose until there’s a solid steam, then close the valve. Hook up the other end to the washer, and open the valve to feed the air free water!

@ALinsdau 3 года назад

Great tip!

@simplescents3309 2 года назад

U saved me the head ache of returning mine back to lowes. Can’t wait to go home and try this. Thank u

@ALinsdau 2 года назад

Hope you enjoy

@handyjoe6937 11 месяцев назад

Thank you for the video, very helpful. I will have a try. I used my pressure washer today, then I took a hour break.whne I back to use it ,it just like what you showed in your video. The pressure goes down and up and down again. I actually bought a brand new one just started using the first day!! So I was thinking that it went fault. I will try your way to see if this is the reason.

@ALinsdau 10 месяцев назад

Good luck!

@ferrellspruell7928 9 месяцев назад

Thank you.. I've tried everything on this portable Teande Pressure Washer.

@ALinsdau 9 месяцев назад

Glad I could help

@jlh5995 3 года назад

Thank you for taking the time and effort to product this excellent, easy to understand, video tutorial on the issue of air causing problems with pressure washers. Very informative and to the point. Keep up the good work!

@ALinsdau 3 года назад

Thanks!

@williamgallagher25 2 года назад

Thank you! This is exactly what my washer was doing!

@DHSFPD2211 Год назад

This is exactly what I have been dealing with - Thank you for posting this, very helpful!

@DHSFPD2211 Год назад

Followed you process and my pressure washer worked perfectly!

@ALinsdau 9 месяцев назад

Thanks for watching.

@ALinsdau 9 месяцев назад

Excellent!

@ajdavies4677 29 дней назад

Yes! This was apparently my problem. Thank you!

@ALinsdau 26 дней назад

Great to hear!

@user-gk6vm1xj3s Год назад

Thanks for the info! Worked like a charm after following your advice.

@ALinsdau Год назад

Excellent!

@lukevillage3894 2 года назад

Dude thank you! I only use my pressure washer a couple times a year and I had this same issue today. Appreciate the knowledge. 👊

@ALinsdau 2 года назад

You're welcome!

@chrissybabe8568 10 месяцев назад

I have a Diamond washer made for them by Karcher. I have never had this problem. I plug the water in and turn it on then pull the trigger. Always works. Been going fine for 20 years until a seal gave way 2 weeks ago. Replaced this and works fine again.

@ALinsdau 10 месяцев назад

Good to know!

@donnaderuse6531 10 месяцев назад

The one video that easily solved our problem

@ALinsdau 10 месяцев назад

Great!

@itsninjamo752 Год назад

Dude! Exactly my power washer exactly my issue thank you so much !

@ALinsdau 9 месяцев назад

Thanks for watching.

@fkngayassshit 3 года назад

i have this problem everytime i use my (gas) ryobi pressure washer. i'm going to try this method out once the weather clears up. thanks!

@ALinsdau 3 года назад

Good luck!

@toddcastle3926 3 месяца назад

Very interesting video. I just replaced my water manifold and had this problem…. I was sooo mad!

@ALinsdau 2 месяца назад

Hope it worked out.

@amadornj Год назад

Thank you you saved me much aggravation! Best to you!

@ALinsdau 2 месяца назад

Best of luck.

@singhaviation Год назад

Thanks for the solution. I always thought it was pump.

@ALinsdau 9 месяцев назад

Thanks for watching!

@familymoseley1393 Год назад

That was great! Nice job! Makes me want to pick you brain on some other things I need to learn about just so I can have you teach me in a private lesson, lol, one on one!

@ALinsdau 2 месяца назад

Thanks for watching!

@shaneksmith1957 Год назад

I'll try it. That is exactly what happened to mine. Before I use a sledge hammer I'll try your trick.. First day worked well for a couple of hours. I'll come back and report. Thank You.

@ALinsdau 9 месяцев назад

Best of luck!

@sirpatmcc 10 месяцев назад

Thank you for demonstrating that,very helpful.

@ALinsdau 10 месяцев назад

You are welcome!

@davidbeauchamp9663 3 года назад

Very informative. That happened to me earlier today. Thank you for that info.

@ALinsdau 3 года назад

Good luck!

@djreaction1 2 года назад

Thank god I found this video! My PW was doing this and driving me insane, I've returned 3 different units because I thought they were defective lol. Thanks for the video!

@ALinsdau 2 года назад

Glad I could help!

@inandoutmobileautocleaning1530 5 месяцев назад

Hey man thanks for the video I’m going to try this tomorrow because I’m having a problem with my robi 1800 and it’s new. Would it matter that I have a 8 foot hose going from the pressure washer to a 50 ft hose reel.

@ALinsdau 5 месяцев назад

My longer garden hoses seem to hold a lot of air so I have to clear it first. Good luck!

@stuartjohnson1238 3 месяца назад

Maybe getting air out of hose before attaching to pressure washer also. Thank you for the video!

@ALinsdau 3 месяца назад

Great point!

@Beth4653852 Год назад

Thank you so much!!! I didn't even think about that!

@ALinsdau Год назад

No worries!

@Promisedland_garage Год назад

Thanks you so much sir, just fixed my Hart electric pressure washer, did this and 1minute started working as always,never happened to me

@ALinsdau Год назад

Great job!

@johnstelluto9101 Месяц назад

Have you tried running the water through your hose first to get the air out then connect it to the power washer? Would that be easier?

@ALinsdau Месяц назад

Yes, I've run the hose but still end up with some air for a while in the compressor.

@yndiradiazlopez6806 2 года назад

I was about to through it away and then I saw your video ! Thanks!

@ALinsdau 2 года назад

No problem!

@kuyapol 2 года назад

Good thing i found your video man im about to return my high pressure washer. Thanks for the video man!!

@ALinsdau 2 года назад

No problem 👍

@shaniaa9287 8 месяцев назад

Thank you so much. I had issue.

@ALinsdau 8 месяцев назад

No worries!

@flowingracefully893 5 месяцев назад

THANK YOU, THANK YOU, GOD BLESS YOU MY BRO!😎

@ALinsdau 5 месяцев назад

Thanks for watching!

@marialago8677 Месяц назад

Thanks a lot. You save me some money 😊

@ALinsdau Месяц назад

Great!

@johncarter8735 8 месяцев назад

Thank you 🙏 problem resolved!

@ALinsdau 8 месяцев назад

Great!

@fitz303 4 месяца назад

Great this wotked a treat and saved me getting bleach and a deck scrubber out, thanks!

@ALinsdau 4 месяца назад

Great to hear!

@fitz303 4 месяца назад

@@ALinsdau You the man, all other videos detached the gun nozzle and my version doesn't have that function 😁

@brooke9903 2 месяца назад

Oh,.. I've been running the water forever! I feel like what you discussed is my problem. I didn't read the instructions correctly at first and ran the water for a minute after i connected it (i thought to make sure the water really ran through) instead of before, and i'm sure totally got a lot of air in the machine. I bet I have run the water (without the power washer motor running) for atleast 30min total now if not more and still the same pressure when I turn on the machine. Am I missing something? Any other tips before I return it?

@ALinsdau 2 месяца назад

30 minutes sounds too long unless you have a leak in your supply hose.

@michaelmcgill-uu5ox 4 месяца назад

My nilfisk does that al try putting it on fr 5m8ns without nozzle run water thro then try nozzle great vid thanks

@ALinsdau 4 месяца назад

Cool, thanks

@esay3668 8 месяцев назад

I seriously love you man. Thank you!

@ALinsdau 6 месяцев назад

Thank you

@nassernajafpour1300 3 года назад

Thanks I saw your video for this problem because I faced it several times and I didn’t know the solution for this problem Air trapped in the hose was the reason Thanks 🙏

@ALinsdau 3 года назад

Great 👍

@CesarLopez-fw7dz 3 года назад

I was goin nuts as to why it would come on and then shut down. There was air in it. Thank you!

@ALinsdau 2 года назад

Thanks for watching.

@jsnfrantz 2 месяца назад

Amazing advice!

@ALinsdau 2 месяца назад

Thanks!

@daveg622 10 месяцев назад

Thank you so much. Was thinking it was my machine.

@ALinsdau 9 месяцев назад

Thanks for watching!

@riadgouridath5838 2 года назад

This really helped. I initially did this but didn't realize how long you had to do it to get all the air out

@ALinsdau 2 года назад

Way longer that I would've thought.

@loudiamonds23ify 2 месяца назад

Super helpful thanks 😊

@ALinsdau 2 месяца назад

So glad!

@mzbreski Год назад

Thanks for posting. This happened to me a couple times and I could not figure it out. Good video!

@ALinsdau Год назад

No worries!

@joshoeproductions8681 Год назад

Thanks for this good sir!

@Liverpool67890 3 года назад

It’s a beautiful area you live my friend..

@ALinsdau 3 года назад

Yes, thank you

@Liverpool67890 3 года назад

@@ALinsdau Which state if u don’t mind my asking

@SQD-1 Год назад

Helped so much thank you

@ALinsdau Год назад

Glad to hear!

@stevecraver3665 2 года назад

Works like a charm now, thank you!!

@DuckMcDuckinson 10 месяцев назад

Hey Aaron. Would a shorter garden hose be the best option for less air? I just got a 3 foot one so it’ll be the best for my pressure washer instead of the 20+ foot one I was using beforehand

@ALinsdau 10 месяцев назад

It'll take less time to clear with a shorter hose for sure.

@TheAbchair Год назад

Hi Aaron, I am a little confused. Do you "water the lawn" with pump on or off. In the video you showed both ways. The problem I am having is similar but a little different. The motor will come on and the 1st few seconds after pulling the trigger will be high pressure and then only a single tiny stream. When I release the trigger the pump seems to build up pressure and the same thing happens.

@ALinsdau Год назад

Water the lawn with the pump off until all the air clears, then turn it on.

@stevewilliams2998 Год назад

Worked for me, thank you!

@ALinsdau Год назад

Great!

@steveturner864 Год назад

THANKS MATE YOU HAVE JUST SAVED ME £340, I WOS ON THE VERG OF GETTING A NEW ONE, TOP BOY! Ye ha!

@ALinsdau 11 месяцев назад

No problem 👍

@quant_solutions 3 года назад

Excellent vid, you saved me a bunch of headaches

@ALinsdau 3 года назад

Great to hear!

@abidsheikh5625 2 года назад

Thanks bro for helping me... What a beautiful place...which country and city is this?

@user-er9dy1qo7k 11 месяцев назад

Thank you it worked!

@ALinsdau 10 месяцев назад

Great!

@JoseDiaz-er4ww 2 года назад

Hi!I have the same model, but when need changes the nozzle for spread soap, simply doesn't work. I need to check it tomorrow. Thank you so much for the video.

@ALinsdau 2 года назад

Thanks for watching!

@prnd21turbo 3 года назад

And here I thought I had a piece of junk . Well , now I know . Thank you sir .

@ALinsdau 2 года назад

Glad to help

@spear-it 3 года назад

Thank you for the tips!

@ALinsdau 3 года назад

No problem!

@Noneofyourbusiness-rq9jq 3 года назад

Super super helpful Any idea about what’s happing when the revs keep going up and down

@ALinsdau 3 года назад

If there's a tiny bit of air, that might change it. But there's probably a governor in there to prevent damage.

@mariapropst7935 Год назад

GREAT VIDEO !! THANKS A LOT!!!

@ALinsdau 9 месяцев назад

Thanks!

@MisterHen Месяц назад

Thank you!

@ALinsdau Месяц назад

Sure thing!

@osomugroso1 2 года назад

haha, nice Video, I was here looking for some videos about pressure washers and saw the back ground and it looked so familiar! the good old Valley... amazing hard to forget. it looks like Selah.

@ALinsdau 2 года назад

Cool, thanks!

@marybischoff-moore8615 2 месяца назад

Thank you!❤

@ALinsdau 2 месяца назад

Sure thing

@vp1473 2 года назад

Thanks soo much. just got a pressure washer and had the exact issue. (was using 100' hose so makes sense)

@ALinsdau 2 года назад

Enjoy!

@Jim-MT 3 года назад

You may have just MADE MY DAY! Thanks..

@ALinsdau 2 года назад

Thanks for watching & subscribing!

@jaydee809 2 года назад

Most helpful!! 🙏🏼 Thank you!! I don’t get the thumbs down on here. This was EXCELLENT advice for those who chose to apply themselves!

@ALinsdau 2 года назад

So glad!

@samuelbarbary8603 Год назад

My sun joe trips the breaker even after installing a new gfci plug. The first time turning it on it had low pressure, then it trip. Changed the plug and it immediately tripped. Any ideas? Thank you

@ALinsdau 9 месяцев назад

Is it on a 15amp circuit? Do you have other items on that circuit? Best to consult a licensed electrician - that doesn't sound good/safe.

@samuelbarbary8603 9 месяцев назад

@@ALinsdau yes, it's on a 15 Amp circuit. Nothing else on that circuit. Sun Joe help is worthless. Thanks for your comment.