How to stabilize wood without spending money

Подписаться 294 тыс.

Просмотров 2,5 млн

50% 1

This video is all about my newest experiment- stabilizing wood. But to make it more exciting I used only things I found at home or junkyard. The only thing I spend money for was resin of course, to have proper results. In the future my goal is to make more proffesional equipment for stabilizing wood.
And why to stabilize wood? The perfect thing about it is that you can use any wood (too soft, a bit rotten, etc..) and turn it into very hard high quality wood. For example in this little experiment I used Thuja wood.
In these condtitions it takes a really long time to soak resin into the wood, my old compressor from fridge has a bit less power I need. I hope I will fix that in the future with some vacuum beast :D
Hope you will enjoy the video :)
If you like the video please share it with your friend to support my work :)

Наука

Опубликовано:

18 апр 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 363

@SharpWorks 6 лет назад

That’s awesome I have an old mini fridge that I was about to throw out but now that I know I can use it for this, I’ll have to reconsider.

@gregarioussolitudinist5695 6 лет назад

No obnoxious music. thank you!! great ambiance.

@bigronxxxx 6 лет назад

Wow the grain on the wood really popped once you stabilized and polished,all the best to you and yours and i absolutely love your vacuum system ,thank you again for sharing your work with us (-:

@marcosboscher5776 5 лет назад

Ron Sanford l

@jamesgray1329 5 лет назад

@@marcosboscher5776 bbbb

@moderatefkr6666 6 лет назад

Nice work Marek Tabi. Thanks for sharing

@TheWoodenRider 5 лет назад

You are a wealth of ideas my friend, very well done. I think I'm going to go look for a huge pickle jar for my bigger pieces to experiment

@errolfoster1101 6 лет назад

In the early days of Australia to protect fences from dry rot they would use drums split by thirds keeping 2/3 so that you could put a log or board inside the drum but first you put your logs in then put the retaining log like a "c" on it's back to stop the logs floating and fill it with what ever you were using to preserve your logs like old sump oil or creosote the you would carefully light a fire under it to heat your oil and as the heat rose the moisture and air would cook out and as the oil cooled the wood would draw the treatment in preserving your wood from white ant and moisture, obviously there were a lot of precautions taken to prevent firessuch as having the fire away frome and channeling the heat under the drums

@errolfoster1101 6 лет назад

@MOLE1148 6 лет назад

I think it's a good idea you can make good wooden things and very durable, greetings from Venezuela!

@SkewToob 5 лет назад

This is great. i've actually thought about curing the resin using my sous vide machine for cooking because I could fit way more blanks than a toaster oven, and have better heat control.

@imkidarose1 2 года назад

How would the souls vide do it?

@SkewToob 2 года назад

@@imkidarose1 As long as you hit the correct temperature, it works. Though when I tried it, the ziploc bag also melted. So, you definitely need a more robust bag to make it work.

@dallaswoiken7533 6 лет назад

Wow thats a gorgeous piece of wood now.id love to see u do it agin but try some regular food coloring in the clear resin instead of the colouring you're supposed to use with resin just to see if it would work as well.i you mite get some pretty funky results

@oneshotme 6 лет назад

Looks good enough to be scales for a knife

@willk5413 6 лет назад

Very informative! God bless!!

@electronicshelpcare 5 лет назад

Thanks for the great video.

@gannonpaxton5217 2 года назад

instablaster...

@majkd4346 6 лет назад

moc dobrý Máro, koukám že skilluješ čím dál tím víc ! za mě super nápad, a rejpalů si nevšímej ;)

@facemakerfno3363 3 года назад

You are boss. Thank´s so much. Finally someone showed a cheap solution

@MarekTabi 3 года назад

Thanks 😁 but i showet expensive solution to 😁😁

@grisfejs 2 года назад

I truly love your hillbilly style. Simplicity rules! I can do this at home without any fancy shit and that´s what I´m looking for right now. You made my day.

@craftedbytimyt 5 лет назад

I got gloves like that! awesome video btw thanks for the info!

@DJbishop666 6 лет назад

Can you make a video comparing the difference between the two?

@duncanjunctionsthemadman7418 6 лет назад

yep got to make one now.

@VeradonaRestoration 6 лет назад

Great video Marek

@ajbaloch8521 6 лет назад

Amazing idea

@bonesstones6584 6 лет назад

Nice video, pretty wood!

@oheebatch_algorytmu 6 лет назад

Zdravím z Prahy. Whats the weight difference before and after the process?

@KedaWoodDye 5 лет назад

Interesting 👍 Very creative!

@michaelferryman3839 6 лет назад

watching the video at the beginning and i half expected jigsaw asking if i wanted to play a game.

@hippychippie1 6 лет назад

A very useful demonstration thank you . Which resin is it? It would be useful to know by what percentage the weight of the wood is increased

@jeffreyyeager1398 6 лет назад

I wish I was aware of this before I built my shed, just wondering if you had a any idea where to get the means to do a rough cut 2x10x10?

@drozdmart34 6 лет назад

zdar Marku , točíš super videa , hlavně o věcech které mě zajímají, trošku ti závidím , ještě nemám hotovou dílnu a tak dělám jen venku , dneska jsem si dovezl šamotové cihly na malou plynovou víheň , taky si po odpolednách úchylačím nože, i když já spíš nerez je s tím víc drbání ale zase hotovej kus nepotřebuje moc údržby , fandím ti , a těším se na každé nové video , Jura Znojmo

@22thiagobatista 5 лет назад

Wow, very cool, thanks

@user-oj1jb5fz4x 6 лет назад

Хорошая идея! Молодец!

@telmobrandao5062 6 лет назад

What type of resin did you use, and where did you buy it?

@salsalero1277 6 лет назад

So what did you end up doing/making with that piece of wood.

@yurrizaid6361 5 лет назад

hmm have you plugged the compressor wire to the neighbors outlet

@gerlofdeboer4552 6 лет назад

Very inspiring video. For a better world. Therefore, all your followers should know that this process is industrialized by the Dutch company Accsys. They sell their timber under the brand Accoya and their plates under the brand Tricoya. So now you can buy wood guaranteed rot free for 50 years above ground and 25 years in ground or freshwater, without the need to buy hardwood and thus without damaging tropical rain forest. Accsys is building two extra factories now, and since the publication of their Q1 results, the shares Accsys are rising.

@dailissmildzers 6 лет назад

This is amazing, thumbs up! So this wood would be perfect for boating stuff! What kind of resin is that? Thanks.

@svendittmann3105 6 лет назад

Nice idea. What do you think about to use lineseed oil for the whole process? This would be completly natural?!

@FYahooo 6 лет назад

Marek Excellent video and information. How about using 2 old compressor in series. The 1st stage will allow the second to acheive a higher vacuum level. However the higher the vacuum used the higher the chance your chamber will imploded. I have collected the same gear as you have and will build mine using 2 compressor very soon.

@mythbuster3567 6 лет назад

you did it!

@malcolmreynolds2943 6 лет назад

any chance you could spot me the link for the resin you used?

@Freizeitflugsphaere 6 лет назад

Very intresting! Is there any special use for that wood? Is it now completely waterproof?

@hippychippie1 6 лет назад

it would be good for doors and windows

@brandontw01 6 лет назад

At least as weather resistant as the resin. Also strengthens wood for other processes, like turning small pieces on a lathe.

@hoold01 6 лет назад

Best for knife scales. Knives get moist/wet, shrink/expand depending on the wood. Stabilised scales don't move, no gaps form round pins.

@waynegrant2114 6 лет назад

Using heavy pvc rather than a glass jar would enable a person to do longer legnths of wood. Specifically for projects like walking sticks, window frames, threshholds, etc.

@izzetkaya9916 6 лет назад

Wayne Grant o

@Lishchynskyi_Y 6 лет назад

Сто раз слышал о стабилизированной древесине, но поскольку темой сильно не интересовался, то информации было мало. Но видео посмотрел с удовольствием. Теперь в теме.

@jannijland5490 5 лет назад

Евгений Лещинский i

@frodofrodo5953 5 лет назад

А что он делал?

@user-dc5lr9hh2y 5 лет назад

@@frodofrodo5953 пропитка вакуумом. Электродвигатели катушки зажигания трансформаторы и тд вытягивается воздух за щет вакуума идёт полная пропитка веществом

@jerrywhidby. 5 лет назад

I need a video on how to attach the fitting to the top of the mason jar. Nobody ever shares that knowledge in these videos.

@johno6861 6 лет назад

I would have liked to have seen the moisture reading now and to have cut into it to see the penetration. What resins were those?

@anthonyrigley4402 6 лет назад

Nice job what resin did you use.

@melvingoh6724 6 лет назад

How was the toughness of the wood now? is it the resin fully soak in a whole wood?

@JTL-DK 5 лет назад

How is weight and hardness after that treatment? Compared to normal wood.

@RecetasLocas 2 года назад

Wood for ever. I have a similar compressor. 👏👏👏

@alexanderSydneyOz 6 лет назад

most interesting. personally, i think i would be keeping my face away from the glass jar unless i at least had a face shield on! could be quite messy if it imploded. that said, perhaps the fridge compressor cant approach enough vacuum to do that, though that could be hard to know for sure in advance.

@omarcasanas2456 6 лет назад

Gracias por compartirlo. !!

@nicolasfabsits6804 6 лет назад

Hello How did you saw this thing into this nice block? How did you dry this wood? What was that for a liquid? Hope to hear from you

@Fishy1764 6 лет назад

Great video Marek . What resin did you use?

@howardbain6516 6 лет назад

Same process is used to green treat out door lumber. When the vacumn is released, atmospheric pressure forces the liquid into the wood

@burstfireno1617 Год назад

But the jar can explode? It has to be a metal container i guess?

@picoplus5783 6 лет назад

Very interesting. What kind if resin is it.

@owpeterj 5 лет назад

Still remains unanserd or I didn’t see. Very time consuming. Strange not to tell of the main ingredient.

@Brassmonger 6 лет назад

Will it get better insulator for low voltage.

@FelixJager2 6 лет назад

Velká paráda pane 🙂

@rafoster 5 лет назад

What did your lines and fittings come out of? You said you got them from the junkyard, but got them out of what at the junkyard? Good vid, nothing fancy but effective!

@prabalmitra9532 5 лет назад

Please advise how to stabilize big size planks for making tables. Thanking you in advance.

@victortsykunov 5 лет назад

Very good ! Get that drill bid sharpened

@shammirmancera9295 5 лет назад

great cook.. ;-)

@alisamarie3881 4 года назад

Hi Makek, thank you for this video. How hard does this wood become? If you stabilize a cutting board this way, would the wood not be able to chip when someones using, for example, a hatchet against it? Ot is there another method you suggest that makes the wood extremely durable?

@heyimamaker 6 лет назад

Does it take longer to stabilize a wood that is maybe more rotten or softer?

@norman7179 6 лет назад

What kind of resin ????? Two part (hardener + resin) or one part? (resin only)

@fibranijevidra 6 лет назад

How deep resin penetrates the wood? Would be nice to see it cut in half.

@hootche1 6 лет назад

Hi i am open to all information , BUT . If you use PEG,. Poley Ethal Glycol. mix a solution of 50% with water , soak i t for 24 hrs, on green timber right of the tree, it will never Split, Warp , Crack , Twist , even during drying, peg,. is cheep to buy.

@superochoo 5 лет назад

polyethylene glycol

@hmingthanacolney2974 5 лет назад

Which resin did you use?

@fbabdiver 5 лет назад

uh what happend to the moisture before and after comparison?

@TheSonofseventhson 6 лет назад

does it really worth the effort?

@barracudasilvio 5 лет назад

Boa noite, qual o líquido usado pra saturar a madeira ? Parabéns obrigado Silvio

@NamBui-ot2ox 4 года назад

what kind of wood do you upright when stabilizing them so you

@diegocosta3790 5 лет назад

Good afternoon, how are you ? I am from Brazil and here you can not easily find specific resin to stabilize wood, would you recommend another resin to do the stabilization? Thank you in advance and one more subscriber!

@joan2159 6 лет назад

What kind of resin is it?

@oc_villain3833 6 лет назад

Nice paperweight .

@eddykws9086 5 лет назад

Excuse me sir. What liquid is used by resin?

@leonshi786 5 лет назад

заточи сверло! Здорово!!

@cecil6711 6 лет назад

Great video. Does the stabilized wood still accept most wood finishes?

@hoold01 6 лет назад

No, no need either, just polish it up.

@behruzsadeghi1166 4 года назад

If im not found stablized resin ,which kind of resin i can use for this procces?!

@yeniumutpartisi6326 6 лет назад

ben şok oldum yaa tahtayı nasılda tahtaya çevirdi sihirbaz bu resmen :)))

@ismailerdem2060 5 лет назад

Umarım bu yorum ciddi değildir

@serefacar5723 5 лет назад

Malesef bunlar bizi ukala cahil olarak tanıtıyor.

@utubiastic 5 лет назад

bu rezin benzeri türkiyede var mı?

@ukaszjankowski1436 5 лет назад

What kind of rekin do you use?

@robertkattner1997 6 лет назад

for larger pieces of wood use an old water tank. Amazon sells vacuum pumps that are more powerfull.

@norman7179 6 лет назад

Larger tanks and larger pieces of wood get expensive quickly because of the cost of the resin.

@ddm3125 6 лет назад

❤️❤️❤️

@mendesdonascimentojuniorse8077 5 лет назад

Que rezina você usou?, e onde você compro?. ...

@kamilstekl6655 5 лет назад

What specific resin did you use?

@srfrg9707 5 лет назад

The blue dot was so necessary. 😂

@travisdickerson7733 5 лет назад

Im still trying to figure out how the drill bit turned into a stone....

@crimi984 6 лет назад

Napisz gdzie kupiłeś i ile placiłeś za żywice, no i jaka to konkretnie żywica.

@beatadziao1805 5 лет назад

Rafal T. On nie zna polskiego ale pewnie jest to cactus juice taka ŻYWICA kosztuje 109 dół chyba z galon

@tazaflow7717 6 лет назад

Good love♥

@Frodillicus1 3 года назад

JATAPOL RESIN WR-90N is the resin he's using, for everyone who was too lazy to pause the video. And for the creator, who's too impolite to answer his patrons.

@salutsalut7427 5 лет назад

What do you do whith the wood ?

@catmandont100 5 лет назад

I gotta find a Pickle Jar larger than my house.

@fernandogoncalves1423 5 лет назад

ola amigo sou leigo na área, mas gostaria de saber se serve para estabilizar madeira com alumilite e se a resina usada é a epoxy? Abraços do Brasil

@davidlangton4743 6 лет назад

Does it make it stronger or less likely to expand/move due to moisture?

@matejskovran5220 6 лет назад

David Langton it definetly DOESN'T make it stronger, its basicaly resin so it is brittle, but since every little wood fiber is soaked in epoxy, it will not expand a contract due to moisture.

@davidlangton4743 6 лет назад

Oh okay, thanks for the info

@matejskovran5220 6 лет назад

David Langton I said it is brittle and you have to be very careful, but i still use it, it looks just amazing when done properly, but you have to be careful when installing pins.

@matejskovran5220 6 лет назад

David Langton the trick is not to use healthy wood, but wood with defects, imperfections, when stabilized it is structuraly stable but looks even better

@davidlangton4743 6 лет назад

Thanks mate, when you said brittle I was a bit put off, didn't want to try it and have the wood shatter or something. Thanks for clarifying

@maximpopovic4621 6 лет назад

super video

@lunguaurel8567 6 лет назад

Hello. How much resin did you used in that jar? Thanks!

@sskkuuddrraa 4 года назад

who cares, its free! read the title!

@alm7707 6 лет назад

What a great way to stabilize wood!! now what the heck do you do with it? Why would you want to stabilize wood for anyway?

@davecook3296 3 года назад

what do you use for stabilizing resin?...is it 2 part or single stage?

@johnbee1069 6 лет назад

Most interesting, has it permeated right through, did you cut to confirm? Is it waterproof or impervious to humidity changes?

@HoutmeyersP 6 лет назад

You made a mistake along the way.......after pulling the vacuum for 24 hours you need to leave the wood in the resin for it to soak. The airpockets in the wood need time to suck in the resin. The way you do it only a very limited amount resin gets sucked into the wood. :)

@christians.8658 6 лет назад

Yes, thats true

@FYahooo 6 лет назад

Actually, that is not correct. The whole point of the vacuum is to pull all the air out of the wood. With the wood totally submerged in the risen, when the vacuum is releast the wood sucks up the resin into every location it previously had air.

@Toto-ko5on 6 лет назад

You are wrong. After vacuuming you should pres resin into the wood with high presure 20 - 40 bar. Just learn how to impregnate the electricity posts...

@FYahooo 6 лет назад

The manufactures of the resin do not agree with you. Now you must use pressure with aluminire resin, but that is a different substance.

@boneshelter6902 6 лет назад

when using resin epoxy one must first make sure a substantial vacuum pressure is achieved when a correct variance between know it all asholes and air resistance to bull shit is maintained -