How To Street Tune Part 2 Hondata S300 Reading Logs

Подписаться 1,1 тыс.

Просмотров 11 тыс.

50% 1

Today we are showing you how to load a datalog and review it.
**Start with a conservative map**
*Only add timing on a dyno or with extensive knowledge on how to read spark plugs*
Link To Basemaps:
mailchi.mp/5e2c11feafe4/best-...
All Motor Basemap Setup:
Stock 240cc Injectors
Stock Map Sensor
2-Step
Shift Light 7500RPM
Rev Limiter 8000
To start tuning you need: (1)Hondata S300 Installed in a Vtec ECU. (1) Wideband (1)Be comfortable cutting 1 wire and joining it to a new wire.
Hondata S300 + ECU Combo from HA Motorsports On Our Website below:
kugantuning.com/products/ha-m...
You can monitor your Air/Fuel Ratio using this AEM X Series Wideband: (The 0-5v White Wire should be connected to OBD1 ECU Pin D14) (Do not splice)
kugantuning.com/product/aem-x...
Follow and subscribe to us below on our social media platforms.
IG ~ / kugantuning
Twitter ~ / kugantuning
RU-vid ~ / @kugantuning
You can download Hondata S300 Smanager from Hondata below
www.hondata.com/?_route_=soft...
POPS & BANGS READ HERE
Use the overrun fuel table settings in Parameters / TPS & Parameters / TPS IGN

Авто/Мото

Опубликовано:

15 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@Budgetbuiltracing1989 3 года назад

I am learning a lot from your videos and I appreciate u sharing ur knowledge with us who are trying to learn to tune our own cars! Keep it up boss!

@KuganTuning 3 года назад

I'm so happy that I am able to share value with you. What are you building

@sleeperracingteam4052 Год назад

Using this for my h22a jdm full bolt ons, thanks bro appreciate it i learned a lot!

@KuganTuning Год назад

Let me see something

@AyoooEli 5 месяцев назад

Think I’ll try the basemap with my b20v on stock injectors until I get a full tune. I’ve tried asking others for help and no one is willing to help or teach which is understandable cause they had to learn as well.

@KuganTuning 5 месяцев назад

It will be a great starting point for b20v

@sucioslife6214 3 года назад

Great video , you should do a all motor tuning video!

@KuganTuning 3 года назад

What are you looking to learn from an all motor tuning video?

@fijrbgiurbvjwerbvib5242 5 месяцев назад

I’m trying to finish my h23a swapped crv and I’m going to see if I can start it up because the ecu I got was from a turboed Honda civic so I’m trying to make a new map so I can at least get the car running 😅

@KuganTuning 5 месяцев назад

The map in the description will be a pretty good starting point for h23

@michaelshowers5122 Месяц назад

I think it’s a great video bro wish you lived close to me. I’m in Wilmington NC only2 places here and 1 has horrible reviews and other 1 has no experience with Honda I would love for you to be the person to do the first tune on my 2000 ex coupe Fresh built d16y8 bottom d16z6 head, forged internals, Brian, Crower, Springs, retainer, cam, 60/48 precision turbo,

@KuganTuning Месяц назад

I can tune it remotely for you. You need a wideband wired to D14. I can walk you thru everything

@michaelshowers5122 25 дней назад

@@KuganTuning really that would be amazing how much would you charge me for something like that

@KuganTuning 22 дня назад

@@michaelshowers5122 send me an email at kugan@kugantuning.com

@UntiI117 3 года назад

Hey man, for the pops and bangs. i dont see anything about ignition timing in the TPS parameters. Only " overrun fuel cutoff(TPS) overrun fuel cutoff (MAP) Overrun fuel resume (initial) Overrun fuel resume (normal) Then the tip in fuel Can you make a video on how to do it? UPDATE: figured it out! And what's cool is that I can control when it pops. Just have to barely touch the gas pedal and it'll pop. So I can make it not pop when I'm going past a cop or something 😂

@KuganTuning 3 года назад

The next video I release will show you how to do it and where the parameters are. This is where they will be --------> Parameters > TPS IGN* ****Update video will not be released*

@zaifaan 2 года назад

@@KuganTuning link for the pop & bang video?

@KuganTuning 2 года назад

Wont be releasing the video. Use the above settings and play with timing to get it to do what you want it to do

@JCMotiveGarage 2 года назад

I need some help with my hondata S300 wideband input

@KuganTuning 2 года назад

How can I help ?

@nikeight9366 2 года назад

Im new to this and I want to learn how to make my car's ecu better how can i learn it? or if i can find ecus suitable for my engine

@KuganTuning 2 года назад

P28 ECU & Hondata S300 is the best combo to start with. Or Haltech Elite 550 (I recommend this for the price)

@nikeight9366 2 года назад

@@KuganTuning does p28 go with any d series?

@nikeight9366 2 года назад

@@KuganTuning also where can i find p28?

@fijrbgiurbvjwerbvib5242 5 месяцев назад

@@nikeight9366yo I know it’s been a year but a 92-95 Honda civic have that ecu

@righty-tightybuilt548 2 года назад

So after you created a basemap. You are live tuning the car? How are you able to get that live feed where your going along the graph? I'm trying to learn how to tune.. shit seems hard as hell.. just installed a turbo on my 95 accord f23a/f22a hybrid.. and got hondata on the way.. tuners are non existence where I live and the ones that are are 8 hours away.. so I'm forced to learn how to tune with my passion for cars.. I just need to know how to turn the car on with bigger injectors then tune the map as I drive and what to adjust the air fuel levels that I see while driving.. do I just drive then when I see a spike in air fuel levels either rich or lean stop the car then go to where it is on the map graph and adjust it to what it should be? Please bro if you can help any that be great bro..