How to switch seat orientation from right to left on Acorn Superglide 120 

Thank you for your video!!! I am living in Hungary, and I bougt an used acorn 120 stairlift, but it had to be turned right side to left side. My son did it, inluding to seat welding. Since then I feel much better! Thank you once again!

great this I have just aquired one and was worry ed it wasn't going to fit but it will now cheers

Your video was helpful indeed. I think you meant to turn the seat post 180 digress, hot 360, but that's alright I knew what you meant. Thanks so much. Loved the siren affects you put in, I was just hoping you weren't doing something bad. Lol!

Awesome!!! Worked like a charm!

Hi Kevin. Just try both links and they working, no E2 errors ?

Yes, it can be revers to left or right side. But you need fabricate seat frame

I’m cleaning up an older Acorn 120 and a couple of the nylon rollers in the bottom of the chair unit seem a little stiff like they need lubricated. They don't seem worn out or sloppy, just roll a little stiff. They are not rolling freely. I'm considering putting the chair on its side then putting a drop of oil so it can get down around the shaft. I'm just not sure what kind of lubricant to use. I don't want to put something that will "eat" the nylon roller. Anyone have any ideas on what type of lubricant to use?

Hi Great tutorial have reversed the seat no Problem . Now its painted you cant tell it has been reversed. One question, you didnt metion the wiring in the arms, do they have to be reversed, im in the uk so difficult to give you a call. Best Regards Michael Fieldhouse

Was given a free used acorn 130. Installed it for my parents, the problem is that it climbs the wrong side of the stairs, climbing alongside the handrail as opposed to climbing along the wall. I was thinking I could just swing the entire rail and chair through 180 degrees as the chair sits at 90 degrees to the rail. I just need to move the position of the rail swing arm and adjust the position of the stops and charging points. Am I missing something important and you can’t do what I’m trying to do ? Because I don’t understand why you would need to rotate the seat through 180 degrees if the whole orientation can just be reversed. Thanks

do they sell a universal bracket to allow you to flip the acorn 130 seat from a LT. to RT.

Hi do you know if you can do the same with the Acorn 130 superglide ?

my up and down limit switch codes l3 l8 come on where is it on a Bruno 2110

Where is the other video showing how to cut the seat?

Hi, Can I reset the problem I am going to describe. the wife dropped a ring in the stairlift into the and the only way to retrieve it was to take unit off of track and turn it upside down to get it. the stairlift was working ok when taken off, but somehow i have activated the OSG when taken off. I reset the OSG (ie, cog and spring) replaced back on track, and on turning on, it is displaying Error F7. The unit will move up & down track Manually but is still showing F7 but cannot activate Electric. Motor. Is it possible to reset the F7 error code. Any help would be appreciated. Best Regards

I’m receiving a c5 code but I have replaced the batteries

Hi i hv same motor, can you advise me how to remove gear from shaft?

Seat on acorn 130 can not be reversed. Base of chair still can be reverse .

Crappy camera work