Step by Step!
In today's video, I'll be showing you how to bench test an ATV starter.
Disconnect your battery before doing any electrical work!
Then disconnect the starter cable at the solenoid (It should be the black wire) then you can unbolt your starter from the ATV housing.
Once the starter is on the work bench, you can either use a battery, or a battery booster to test it. Either way, you'll need a 12volt source of power!
I use an Eliminator 12v battery booster, because I can hook everything up 1st, and then flip the switch to provide the voltage necessary to engage the starter.
If you follow the steps in this video, it can potentially help you diagnose electrical issues, by what's known as a "Process of Elimination".
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
SOCIAL MEDIA:
/ eliminatorperformance
/ eliminatorperf
/ eliminatorperformance
GEAR:
Camera: amzn.to/2HVkW9o
Tripod: amzn.to/2HGWt4w
Microphone: amzn.to/2J7k9DA
Cheap Mic: amzn.to/2xCBn6z
Headphones: amzn.to/2JeHUG9
Editing Software: amzn.to/2JD7OTx
Photoshop: amzn.to/2HBY6Ez
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks
22 авг 2024