Тёмный

How to Test & Fix P0340 Camshaft Position Sensor Circuit Fault Code | Fix Engine Starting Problem 

Automotive Diagnosis: Cars Repair &Training Guides
Подписаться 49 тыс.
Просмотров 159 тыс.
50% 1

Hi There, You guys may have had difficulties many times to start the engine. You have the engine cranking but no start. One of the common problems is faulty camshaft position sensor. In this video I show you how to test the camshaft position sensor and the relevant wiring. I have also provided all wire colors and pin numbers for the Nissan Tiida/Versa 2009 which you can use it for the diagnosis.
What is covered in this video:
- Diagnosing the engine with the scan tool and reading the fault code (P0340)
- Camshaft position sensor wiring diagram analysis
- Camshaft position sensor Power supply test
- Camshaft position sensor Ground Circuit test
- Camshaft position sensor Signal Circuit test
- Camshaft position sensor testing procedure
Join the channel for more videos and more support:
www.youtube.com/@AutomotiveDi...
Please follow us on the following social media too:
/ autodiag001
/ automotivediagnosis
Disclaimer:
Any information contained in this video is just the understanding of “Automotive Diagnosis: Cars Repair & Training Guides” and it is not an official guide or reference, so everything provided in this video is just a share of our experience and understanding and they are provided as a courtesy for your reference only. So, if you are using any part of this video, use the information at your own risk. We highly advise you to check the manufacturer owner’s manual before performing any act of removal, diagnosis, inspection, or repair on your car to know about what you are authorized to do on your car, what the correct and legal procedure is and what risks might be involved, also viewers are strongly advised to consult a licensed person before any sort of inspection or repair. Due to the factors beyond the control of “Automotive Diagnosis: Cars Repair & Training Guides”, we cannot guarantee against improper use of information or tools or systems, or the procedure provided. “Automotive Diagnosis: Cars Repair & Training Guides” disclaims any damage, injury or loss caused by your decision to follow the steps provided in this video.

Авто/Мото

Опубликовано:

 

30 июл 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 49   
@AutomotiveDiagnosis
@AutomotiveDiagnosis 17 дней назад
Watch the new version of P0340 Diagnostic video with oscilloscope included: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XP-PABEb3u8.html
@autokiaa9563
@autokiaa9563 2 года назад
Brilliant video with all steps and details required. I can't wait to see your next video.
@AutomotiveDiagnosis
@AutomotiveDiagnosis 2 года назад
Thanks 🙏 I
@Hurlburton
@Hurlburton 2 года назад
One of the best automotive videos I have seen
@AutomotiveDiagnosis
@AutomotiveDiagnosis 2 года назад
Thanks a lot for your nice feedback and for the positive energy you just gave me.🙏🙏🙏
@Zeus-mu1oo
@Zeus-mu1oo Год назад
Best video on RU-vid,I have the same problem in Hyundai Santa Fe
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Thanks for your nice comment and glad this video was helpful.
@abhijeetsurve8199
@abhijeetsurve8199 Год назад
Awesome diagnostic tips
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Glad you like them!
@AutomotiveDiagnosis
@AutomotiveDiagnosis 2 месяца назад
You might be interested to watch the following video too: Test & Fix P0341 Camshaft Position Sensor A Circuit Range/Performance Fault Code ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-40Ec7c57ZoI.html
@AutomotiveDiagnosis
@AutomotiveDiagnosis 4 месяца назад
You might be interested to watch the following video too: How to Test & Fix P0016 Crankshaft Camshaft Position Correlation Bank 1 Sensor A (Bank 1 - Intake) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-DkpWoBCCtoU.html
@joseantonioindasantana2706
@joseantonioindasantana2706 2 года назад
No saludos excelente diagnóstico
@adnanmughal1889
@adnanmughal1889 Год назад
Great person
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
🙏👍
@user-iz5vs3jh7o
@user-iz5vs3jh7o 7 месяцев назад
Loi 1681 pats là gì vậy bác xe no kim ko phun được V6 pord
@abu.waleed1016
@abu.waleed1016 10 месяцев назад
Thank you ❤
@AutomotiveDiagnosis
@AutomotiveDiagnosis 10 месяцев назад
You're welcome 😊🙏🙏
@jonavensundo2208
@jonavensundo2208 6 месяцев назад
Love you 👍
@AutomotiveDiagnosis
@AutomotiveDiagnosis 6 месяцев назад
❤️❤️🙏🙏
@tonyalan4791
@tonyalan4791 Год назад
I need help. I have 2018 Ford Taurus. I have 4 cam sensors. I replaced with OEM new ones. I even put a new crankshaft sensor in. The cam sensors read when the engine is cold but after engine is warm they all stop reading. I can tell by the live data on my scan tool.
@tonyalan4791
@tonyalan4791 Год назад
And they all stop reading when warm
@tonyalan4791
@tonyalan4791 Год назад
Can someone help me out
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Hi there, and you have p0340 or another fault codes too?
@xxMvrco
@xxMvrco Год назад
I think that’s wats going on wit my 06 Altima. Did u fix it?
@AutomotiveDiagnosis
@AutomotiveDiagnosis 2 года назад
Check this video too: How to Remove & Test the Ignition Coils on Nissan Versa / Tiida | 3-Wire Coil On Plug Testing Method ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CaQ0x8okOqI.html
@user-jx3zy2ll1r
@user-jx3zy2ll1r 2 года назад
Good
@mohsenmohsen8514
@mohsenmohsen8514 Год назад
👍👍
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
@@mohsenmohsen8514 👍
@HA-um2sn
@HA-um2sn Год назад
​@مصطفی قربان دوست
@HA-um2sn
@HA-um2sn Год назад
JH V
@qawwertyyugggyiuiuuhinkopo748
@qawwertyyugggyiuiuuhinkopo748 10 месяцев назад
I have an issue it's been throwing at crew for almost four years now on my Chevy Aveo and the car is still running perfectly it's x-rayed up on their number one crying like a kitten but I can't pass the mission cuz it's throwing a code that is so crazy I erase it picked over a fight baby I got to change the oil already did that once and it came back but I might have to try it again
@AutomotiveDiagnosis
@AutomotiveDiagnosis 10 месяцев назад
Hi there, thanks for sharing your experience, is your code P0340? You didn’t mention it.
@razzaqabdalghani4433
@razzaqabdalghani4433 9 месяцев назад
السلام عليكم كيا اوبتيما ٢٠٠٧ سته سلندر هل يمكن التبديل بين الحساسين للكام شفت
@AutomotiveDiagnosis
@AutomotiveDiagnosis 9 месяцев назад
Hi there, any parts with same part numbers can be swapped.
@muhammedsubhi2082
@muhammedsubhi2082 Год назад
Thank you so much
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
👍👍🙏🙏
@ernestdamo677
@ernestdamo677 Год назад
Please can hall sensor test for resistance
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Normally we don’t check the Hall-effect sensors for resistance as I haven’t seen the specifications or any recommendations in the workshop manuals to do so. Although I have seen many guys made videos in RU-vid for checking these sensors by measuring the resistance, there is no specifications to check the measurements with, and when there is no spec., how can we say this measurement is good or not? However for inductive sensor we do have the internal resistance check and we do have the spec. as well.
@ernestdamo677
@ernestdamo677 Год назад
@@AutomotiveDiagnosis thanks for your help
@ridwansatria3671
@ridwansatria3671 Год назад
When i test ecu signal 5v,it change to 12v, what happen, hyundai accent 2003
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Hi there, you did this when CMP connector was disconnected?
@ridwansatria3671
@ridwansatria3671 Год назад
@@AutomotiveDiagnosis yes, the cmp not connect
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
@@ridwansatria3671 That’s normal, when connector is not connected that voltage change will not happen.
@ridwansatria3671
@ridwansatria3671 Год назад
@@AutomotiveDiagnosis omg, so i think my cmp is broken . Thank u for sharing
@abinaibrahims6680
@abinaibrahims6680 Год назад
I have scanned using obd2, then the error code appears. But there is no problem with my car, such as difficulty starting the engine. Is it okay if I delete the error code?
@AutomotiveDiagnosis
@AutomotiveDiagnosis Год назад
Yes, That should be fine. Most of the time, fault is intermittent and it happens just because of a poor connection or just an electrical noise. Erase the code and keep driving and keep an eye on the engine light. If it comes back, check the sensor connector.
@user-rr5sr9re8h
@user-rr5sr9re8h 3 месяца назад
god
Далее
ВОТ ЧТО МЫ КУПИЛИ НА ALIEXPRESS
09:35
Просмотров 475 тыс.
Kettim gul opkegani😋
00:37
Просмотров 1,1 млн
Ford E150 P0340 Cam Code But It's NOT What You Expect
14:34
5 Secret Tips to FIX ANY CAR
25:51
Просмотров 126 тыс.
Crankshaft Position Sensor Test
4:21
Просмотров 330 тыс.
P0340 Cam Sensor Circuit Code (New Sensor Installed)
40:52
HOW TO TEST CAMSHAFT SENSOR (CMP SENSOR)
8:58
Просмотров 526 тыс.
How To Reset All ECU  No Scanner No Tools Required
8:34
💥P0340 | OBD2 CODE | SOLUTION FOR ALL BRANDS
2:48
Просмотров 149 тыс.
Lool 🤣💃🏻 BMW i4 ❤️
0:14
Просмотров 1 млн
PRADO 250 - классная машина!
0:28
Просмотров 3,8 млн