No video :(

How to Test & Fix P0017 Crankshaft Camshaft Position Correlation Bank 1 Sensor B (Bank - Exhaust)

Automotive Diagnosis: Cars Repair &Training Guides

Подписаться 52 тыс.

Просмотров 8 тыс.

50% 1

In this video I show you how to diagnose and fix the engine when you get P0017 Crankshaft Camshaft Position Correlation Bank 1 Sensor B (Bank 1 - Exhaust) fault code. I explain the VVT operation and show all relevant components including VVT, VVT Solenoid, Camshaft position sensor and timing system.
This video includes the followings:
P0017 Crankshaft Camshaft Position Correlation Bank 1 Sensor B (Bank 1 - Exhaust) - Engine Fault Code explanation
VVT Operation and fault code description
VVT solenoid (OCV) power supply test
VVT solenoid (OCV) Actuation test on the engine
VVT solenoid (OCV) actuation test using a scan tool
VVT solenoid (OCV) removal and cleaning
VVT solenoid (OCV) actuation test off the engine and using a battery
VVT solenoid (OCV) internal resistance test
VVT test
Engine Timing
Timeline:
00:12 Variable Valve Timing Description
05:10 VVT Solenoid Power Supply and control line inspection
06:38 VVT Internal Resistance test on Engine
07:28 VVT Actuation Test on Engine With a Battery
07:52 VVT Solenoid Removal
08:52 VVT Solenoid Resistance Test
09:32 VVT Solenoid Actuation Test Off the Engine
10:41 Testing The VVT Operation With Scan tool
13:46 Crankshaft Position Sensor Removal and Inspection
15:23 Camshaft Position Sensor
16:31 VVT Inspection and Timing Adjustment
You may like to watch the following videos too:
How Immobilizer Works | Transponder Chip, Immobilizer Components, How to Bypass Immobilizer
• How Immobilizer Works ...
CAN-BUS Explained | Everything You Need to Know About CAN-BUS | CAN-Bus Diagnostics & How It Works
• CAN-BUS Explained | Ev...
Don't Replace ABS Module Before Watching This | Repair ABS Module for Motor & Valve Relay Error
• Don't Replace ABS Modu...
Join the channel for more videos and more support:
www.youtube.co...
Please follow us on the following social media too:
/ autodiag001
/ automotivediagnosis
#p0011
#p0014
#p0016
#p0017
#enginetiming
#vvt
#enginerepair
#camshaft
#crankshaft
Disclaimer:
Any information contained in this video is just the understanding of “Automotive Diagnosis: Cars Repair & Training Guides” and it is not an official guide or reference, so everything provided in this video is just a share of our experience and understanding and they are provided as a courtesy for your reference only. So, if you are using any part of this video, use the information at your own risk. We highly advise you to check the manufacturer owner’s manual before performing any act of removal, diagnosis, inspection, or repair on your car to know about what you are authorized to do on your car, what the correct and legal procedure is and what risks might be involved, also viewers are strongly advised to consult a licensed person before any sort of inspection or repair. Due to the factors beyond the control of “Automotive Diagnosis: Cars Repair & Training Guides”, we cannot guarantee against improper use of information or tools or systems, or the procedure provided. “Automotive Diagnosis: Cars Repair & Training Guides” disclaims any damage, injury or loss caused by your decision to follow the steps provided in this video.

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@AutomotiveDiagnosis 3 месяца назад

You might be interested in watching the following video too: How Immobilizer Works | Transponder Chip, Immobilizer Components, How to Bypass Immobilizer ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lXFttSeph94.html

@mohammadal-gebaly3046 3 месяца назад

Professional job , thanks

@AutomotiveDiagnosis 3 месяца назад

Thanks for watching!

@s1lv3st3r13 11 дней назад

Hey guys, I had code p0017 and p0368 in a Sienna 08 I fixed it by replacing the camshaft sensor, the AutoZone brand didn’t work so I used one from the junk yard! Works like a charm

@jaidahamad1123 Месяц назад

Thank you sir good information

@AutomotiveDiagnosis Месяц назад

Thanks for watching

@Alfonso749 15 дней назад

Excellent

@AutomotiveDiagnosis 15 дней назад

Thanks

@timmi511 2 месяца назад

Hi! It might be a long question with background. I bought ES350 2009 @ 223K miles few months ago. At the time of purchase tests showed P0011, P0012, P0013, P0015, P0016, P0017 and the engine is rebuilt. There was no issue at the time apart from 1-3 seconds upto a minute of rattling sound on start (cold, hot and sometimes while waiting at a red light). It had 5W30 in it then at the time of engine service. At service the Oil guy told me to go for 20W50 coz the engine was old. My bad I listened to him, and from the time I started the engine after changing the oil, I felt something off. Engine felt heavy, it took effort to run and mild vibration on idling. The next morning when I started the car the rough idling was wayyy more. The RPM was dancing, low and high on its own. The car wants to let go if I keep breaks on at D. Since then it comes and goes away as it wills. There is no check engine light. Since last 2 days the AC compressor doesn’t switch on if I’m waiting at D. As soon as I switch to N it starts cooling and sometimes it doesn’t work on P either. My mechanic told me everything is coz of the VVT gears and timing chain. It needs adjust only. I checked it again yesterday with autel scanner at the workshop and it gave P0011 & P0016 only. He’s adamant that solenoids and sensors are fine as there is no check engine light. All the RU-vid videos I saw, they keep VVT to be the last thing wrong but my mechanic is going the other way around. He didn’t check the connections, the sensors or solenoids. PLEASE TELL ME WHAT SHOULD I DO? I’m sorry it’s too long, but I had to explain. Thanks in advance.

@wise_soul8886 22 дня назад

Did You fix the issue?

@timmi511 22 дня назад

@@wise_soul8886

@Hari-tw5fm 2 месяца назад

Great explanations and diagnosis

@AutomotiveDiagnosis 2 месяца назад

Thanks my friend

@amarabdelli487 3 месяца назад

Great video thanks for sharing. this actuation test is not dangerous for the engine, as the engine is running?

@AutomotiveDiagnosis 3 месяца назад

Thanks for watching. No my friend, it’s recommended by workshop manual. And the variable valve timing system is to work when engine is running.

@ItchyKneeSon Месяц назад

Great video. Thanks!

@AutomotiveDiagnosis Месяц назад

Glad you liked it.

@robertmobileman8304 3 месяца назад

great video, well explained

@AutomotiveDiagnosis 3 месяца назад

Glad you liked it!

@Dj_Barlethh Месяц назад

Do you think if the Mechanic when he changed the Engine Timing Cover he could damage the chain ? He says he will move the engine without starting it to see if the time chain moves after he did he says it rotate well and the chain is fine do you think thats accurate?

@medch4193 3 месяца назад

Hi sir which one do you think is better launch or xtool and thank you for this interesting video

@AutomotiveDiagnosis 3 месяца назад

Hi my friend. Xtool is not bad for some special functions (depends on the model), but if I consider all aspects, I would go for Launch. I have 6 different scanners, but as you see in the videos, I mostly use Launch.

@medch4193 3 месяца назад

@@AutomotiveDiagnosis that's what I was thinking too thank you sir for the clarification

@ceylonreports 3 месяца назад

Thank you ❤

@AutomotiveDiagnosis 3 месяца назад

Thanks for watching

@ravimech9920 Месяц назад

Perfect

@AutomotiveDiagnosis Месяц назад

👍👍

@nadeeramaduranga5314 3 месяца назад

In some vw engines most of time this DTC pop-up when timing chain stretch

@AutomotiveDiagnosis 3 месяца назад

Thanks for sharing your experience my friend

@priscripzionz 2 месяца назад

Could'nt it also be a bad reluctor ?

@AutomotiveDiagnosis 2 месяца назад

Yes, it could be the cause as well, generally for that sort of fault, we will have the crank sensor fault as well, and if we don’t, we can diagnose it with an oscilloscope.