I have a samsung front loader WF42H5200AW/A2. It stopped with 18 minutes left in the cycle twice, I finally shut it off and pulled the clothes out. The washer spun the water out of the clothes. It has also been making a load whirring noise and moving around. I went to put the machine on self clean but it wouldn't fill or agitate. You could see the drum struggling to turn. I got a 9.35 a 5.36 and a 4. Something on the ohms test. Can someone please help figure out what is the problem
Did you figure it out? My washer stops spinning and if I open the lid and manually spin the drum/agitator it will eventually start spinning. Thanks in advance
Does all the stators motor in the front load washing machine should have the reading ohms between 9 to 9.5 ohms? Please Please Answer to my question Thank you so much an advance You have the best RU-vid channel and you are my reference to learn and all the time I ordered my parts through your website
this model number stator should read 19.3 ohms at room temperature, if it is good. The readings he makes on the stator in this video determines it to be bad
Hi.. I'm having a problem with Bosh series 6 model top loading washing machine.. I replaced the motor and the stator because the previous one making an noise when it's washing mode... Even after i replaced with new still the same noise.. When spinning no noise... Can you explain me why??
Idiot question here. I damaged the stator copper wires when trying to get the stator cover off. There are now two broken and missing peices of wire. Is my stator toast? When I put the washer back together with the broken part it won’t spin. I’m guessing that damage fried the stator.
@@PartsDr Hi I have Samsung toploader 18kg it gives me a 8c1 code it does not have vibration sensor, I replaced pc board and noise filter, all the displays wor fine, there is also power to the pc, when I press, wash, rinse or spin nothing, I only hear the drain motor working, the machine is only 3years old, not sure what to do???