How to Trim an Off-Center-Fed Dipole (

Подписаться 129 тыс.

Просмотров 10 тыс.

50% 1

Mrk, K3PPP, needs a little clarifaction on how he should trim his OCF-dipole, and he would like to know how Dave came to his answer...
Dave will answer both of these questions in this video.
Subscribe: / davecasler . Ask Dave Playlist: goo.gl/inaQeB. Tip Jar: ke0og.net/tip-jar
Edited by Callum Jakeman
To learn more about me, visit: www.dcasler.com/about/
Tip jar (on my website): www.dcasler.com/tip-jar/ (provides a method to use your credit card via PayPal, Also describes Patreon)
To pose an Ask Dave question: www.dcasler.com/ask-dave/ or www.ke0og.net/ask-dave/
To order the most recent and up-to-date Amateur Extra videos on a thumb drive: dcasler.com/aevids-on-stick/
Theme music is "Sour Tennessee Red," by John Deley and the 41 Players, courtesy RU-vid Music Library.
I use drawings from OpenClipArt.org, including the "walking man"
Technician training videos, see www.ke0og.net/training/
General training videos, see www.ke0og.net/general/
Amateur Extra training videos, see www.ke0og.net/extra/
List of the Ask Dave videos, see dcasler.com/ask-dave/#askdavelist
Thanks to my sweet wife, Loretta, KBØVWW, for both audio and video assistance! (Her website is www.aldea-art.com.)
My primary website: www.dcasler.com
The ham radio part of my website (direct link): www.ke0og.net
My publishing website: www.mtsneffelspress.com, where you can find my fantasy and science fiction books, as well as some local history books I publish for the Ridgway Railroad Museum and the Ouray County Historical Society
My Amazon author page, which lists my print and Kindle books: www.amazon.com/-/e/B00471I0Q4.
I'm often asked what equipment I use to create the videos. The devices include the Panasonic DMC-G7 camera, Panasonic HDC-TM90 video camera, GoPro Hero2 HD camera, Tascam DR-05 audio recorder, Audio-Technica ATR-3350 lapel microphone, Sony Cyber-shot DSC-W560 digital camera, the Kodak Zi-8 video camera, my iPhone 5S. Software used: CyberLink PowerDirector 17 on an HP Gaming Pavilion, also using Smoothdraw 4.0.5.0, FastStone Image Viewer 5.3, FastStone Capture 8.0, Audacity 2.1.1, LibreOffice 5.0.4.2, and Ink2Go 1.7.2. You can see how my studio is set up by viewing • Tips for Making Instru... .
Twitter: @dcasler

Наука

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@cuban9splat 2 года назад

I have been experimenting with OCF dipoles for about 15 years now, and I must say, Dave you are spot on with your analysis and explanations. My current OCF (35'/90') is strung between some very tall trees. I live in the forest with lots of very tall Oak, Pine and Hickory trees. There is a difference in tuning between summertime when the leaves are full and winter when the leaves are on the ground. I think it's the leaves that cause the change between seasons. It's not a significant change but I can tell it changes. I use an old Drake MN 2700 Matching Network with calibrations on the knobs. Great stuff, Dave. Keep up the good work! 73 de K7RMJ Frank

@kenslimmer5251 2 года назад

Great Video, one thing, the formula using 468 is not due to velocity factor, its shorter due to end effect. " End effect, capacitive loading of the unterminated wire ends against ground

@kentk9aee898 2 года назад

Had a POTA QSO with Mark, K3PPP yesterday. Hi Mark. 73 K9AEE

@AC3HT 2 года назад

Thank you Mr. Casler for the good video.📺 73 de AC3HT

@davidsradioroom9678 2 года назад

Good explanation!

@Bikemen61 5 месяцев назад

Also when trimming any OCF antenna is that you might optimize let’s say 40 meters in this case but the other band will also be affected. There’s always a compromise when using multiband antennas.

@garydejulio484 Год назад

Thanks!

@timmack2415 2 года назад

I have an ocfd, 90' one side, 180' on the other side. I have a DX engineering, four to one current balance. The SWR is just about flat on 160, 80, acceptable on 40, 20, part of 10 and part of 6 meters. It is 65-70 feet at the apex and about 15' at the ends. For some odd reason, despite the quite acceptable SWR, the antenna does not perform well. My G5 RV beats the pants off it every time. I'm glad not sure why. It is the antenna that I wanted to love, but don't.

@n9amiwavelengthradio 8 месяцев назад

Id doesn't perform well because you went with a 160 ocf.. Switch to a 80 meter version and it will perfrom. 160 ocfs do not work well. Try it you will find out.

@timmack2415 8 месяцев назад

@@n9amiwavelengthradio That interesting. I have a 'double' G5RV that is fantastic! The 160 meter OCF dipole is just awful. The only issue with trimming it down for 80, is that I used 160 M for probably 75% of the time. Because of the way that my property is, and where my house is situated, the OFC was a perfect fit. But I don't rarely use it, so I guess I won't be missing much.

@BartVanAllen 2 года назад

well - unless you use a wide range tuner, then no need to shorten anything. I use an 80m OCF and it works everywhere (never tried 160), but is not easy to get a match on 60. And I use chokes at both ends to keep stray rf out of the shack.

@Bikemen61 5 месяцев назад

Agreed but whenever you have to tune anything grater than 4:1 with a tuner located in the shack the real SWR (power coming back) between the tuner and the antenna will be dissipated as heat by the coaxial cable. Making the antenna extremely inefficient.

@Bruce-bo4hq 2 года назад

I didn't understand how 50:400 would be a 4:1 bal-bal

@peteranoia4570 2 года назад

I thought it would be ~200ohm at feed point

@subramanianr7206 2 года назад

Usually the feed point impedance (at the usual heights hams can manage) of an OCF would be around 200-400 ohms as he said in the video. When the impedance transformation is 200 ohms it's 4:1. Dave, mistakenly mentioned in the video. As the feed point height becomes half lambda (for the lowest frequency band) or more the impedance becomes higher near to 600 ohms and we need to transpose with a 6:1 BalUn (though not common in the commercial designs) The 4:1 BalUn must be followed by an 1:1 CMC (common mode current) choke to avoid RF in the shack issues. De VU2RZA

@kc6nfv746 4 месяца назад

My ocf antenna 132 feet one side 88 other is 44 3.8 swr 3.1 on 3.5 swr 1.7 I want be in the 3.8 how I trim the antenna

@davecasler 4 месяца назад

No simple wire antenna will cover all of 80 meters. If you trim the antenna, it will affect all the bands. 73, Dave, KEØOG

@Brenda-jf2pe 2 года назад

Cord you mean wire!!

@Brenda-jf2pe 2 года назад

Balun designs has a high quality 4:1 with built in 1:1 for an ocf dipole! It’s better than mfj but you need to buy wire and dog bone insulator’s! Highly recommended by ehamnet! JohnBoy UtAh (KJ7TBR)