How to Turn Tiny Endgrain Bowls That Sell.

Подписаться 13 тыс.

Просмотров 79 тыс.

50% 1

How to Turn Tiny Endgrain Bowls That Sell.
In this video I walk you through the process that I use to production turn small endgrain bowls. These make great gifts for family and friends to use for medicine or to place jewelry in. They are great for the night stand or beside the sink.
Thanks for Watching
#woodturning
Website
www.deanswoodworking.com/
Facebook
/ deansfinewoodworking
Instagram
/ deans_woodworking
The following links are affiliate links to items that I use in my shop.
Any potential purchasing or even clicking on these links will help support the channel
Making it possible for me to continue to create more content for you.
Many of these items you have seen in use in the videos.
Tools I use
3/8 Double end Ball Mill amzn.to/3mDhFie
CHUCKS AND MOUNTING
Bottle Stopper Chuck amzn.to/342ohjM
Nova G3 Chuck amzn.to/3zhBtgl
Nova Infinity quick change chuck amzn.to/3mEBKod
Oneway Talon Chuck amzn.to/3z1Jhm2
Oneway Stronghold Chuck amzn.to/3Hx4Q15
Oneway Live Center MT2 amzn.to/3quwu7N
Oneway Live Center MT3 amzn.to/3sThzXR
SHARPENING
Oneway Wolverine Jig amzn.to/3EABvAN
FINISHES
Min/Wax Antique oil finish amzn.to/3ExF36M
SUPPLIES
Bottle Stopper hardware Standing 10 pk amzn.to/3Jg4gGq
Bottle Stopper hardware Cone 6pk amzn.to/3HiqR3g
Ornament Hangers Silver amzn.to/31bwG3k
Ornament Hangers Gold amzn.to/32HcxCw
BOOKS
Book Classic Forms amzn.to/3z2AqQZ

Хобби

Опубликовано:

27 июл 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 210

@norm5785 16 дней назад

Wonderful project, thank you for sharing. Everyone stay safe, warm, happy and healthy. From Henrico County Virginia

@daltonvickersjr9441 2 года назад

Love those tiny bowls. Thank you for the video

@DeansWoodworking 2 года назад

You are so welcome!

@joannkister2540 3 месяца назад

Very cute bowl

@JiggsysShed 2 года назад

These are super cool. Thanks for sharing

@DeansWoodworking 2 года назад

Glad you like them! Thanks for Watching!!!

@CindyKGenX 2 года назад

Cute little bowls!

@DeansWoodworking 2 года назад

Thank you Cindy!!!

@utubephil100 Год назад

Very nice indeed - thanks for sharing !

@DeansWoodworking Год назад

Glad you enjoyed it, Thanks for Watching!!

@tedcarson2971 2 года назад

Thanks for sharing another great "little" idea, Dean.

@DeansWoodworking 2 года назад

Glad you liked it

@brianfern5474 2 года назад

How refreshing to watch Thank you

@DeansWoodworking 2 года назад

Glad you enjoyed it, Thanks for Watching!!!

@deforrestkeeling5782 2 года назад

Thanks Dean another great video and idea. Happy turning.

@DeansWoodworking 2 года назад

Thanks, you too!

@gregcullen9844 2 года назад

Awesome Dean I will have to definitely try this.

@DeansWoodworking 2 года назад

Please do!

@jontoolman 2 года назад

Nice little turning. Thanks for sharing 👍

@DeansWoodworking 2 года назад

Thanks Jon, and Thanks for Watching!!!

@gregdagg9305 2 года назад

Handy little bowl, well done.

@DeansWoodworking 2 года назад

Thanks Greg, and Thanks for Watching!!!

@kevingaddis7276 Год назад

Great video Dean, I like the simple things.

@DeansWoodworking Год назад

Me too Doug, Thanks for Watching!!!

@evint6624 Год назад

What a neat little bowl great job

@DeansWoodworking Год назад

Thank you!

@William_Kenny Год назад

Great little bowls nicely done 👌👍

@DeansWoodworking Год назад

Thanks, Glad you like them!

@richardphilpot9193 Год назад

Great work thanks for the tips

@DeansWoodworking Год назад

Thanks for Watching!!!

@fierceflyer5 2 года назад

Enjoyed your video thanks for sharing

@DeansWoodworking 2 года назад

Glad you enjoyed it, Thanks for Watching!!!

@SiamWoodShop 2 года назад

Fantastic idea Dean and the pear wood looks terrific. Keep safe, John

@DeansWoodworking 2 года назад

Thanks John, you too!

@robcpwoodturner 2 года назад

Great work Dean 👍👍👍

@DeansWoodworking 2 года назад

Thanks 👍, and Thanks for Watrching!!!

@JohnStJohn1970 Год назад

Helpful video ...thanks for sharing.

@DeansWoodworking Год назад

Thanks John, and Thanks for Watching!!!

@josephsmith452 2 года назад

Excellent demo Dean. Simple way to make tiny bowls and a fun to do. Well done Dean, thanks for sharing 👍 👏

@DeansWoodworking 2 года назад

My pleasure! Thanks for Watching!!!

@marvinhall471 2 года назад

Thank you that was very interesting. I’ve always wanted to do that !

@DeansWoodworking 2 года назад

You should! Thanks for Watching!!!

@suzetteedwards7956 2 года назад

These are great. I'm going to try some.

@DeansWoodworking 2 года назад

Glad you like them!

@JamesCouch777 10 месяцев назад

Perfect, I was looking for something just like this 👌

@DeansWoodworking 10 месяцев назад

Great, Thanks for watching!!!

@randywood4782 2 года назад

Thanks Dean I like that little Bowel good 👍 job

@DeansWoodworking 2 года назад

Thanks, and Thanks for Watching!!!

@user-nt7dp3ie3v 10 месяцев назад

GREAT idea.....had not thought about end grain, but will try next week. Thanks for all the new tips in woodturning

@DeansWoodworking 10 месяцев назад

Glad to help, Thanks for Watching!!

@emgiwoodworks 2 года назад

I like your process Dean, seems like ine can really turn them out in a short time. Thnx! 😎

@DeansWoodworking 2 года назад

Thanks, and Thanks for Watching!!!

@brianlaverty8818 11 месяцев назад

Great demo we'll done

@DeansWoodworking 11 месяцев назад

Thanks and Thanks for Watching!!!

@paulsimmons390 2 года назад

great idea. I can do that. Thank you for sharing such a neat idea. i have seen miniature work but these little bowls would be great.

@DeansWoodworking 2 года назад

You are so welcome Paul! Thanks for Watching!!!

@joerangel9871 2 года назад

Awesome work, it's amazing how fast you turned that little bowl 🥣. 👍

@DeansWoodworking 2 года назад

Thanks 👍

@josephcraft2845 2 года назад

Cool

@DeansWoodworking 2 года назад

Thanks

@texashula2213 2 года назад

Very informative video for sure. Was sitting here sipping on coffee and thinking about todays project in the shop. Think you just inspired me. Appreciate you sharing.

@DeansWoodworking 2 года назад

Glad you like it, Thanks for Watching!!!

@madonnakirby9101 2 года назад

Thank you! Little bowls are one of the things I want to turn and this video was great. Beautiful little result!

@DeansWoodworking 2 года назад

You are so welcome Madonna! Thanks for Watching!!!

@clarencecaudill2616 2 года назад

That was verry good

@DeansWoodworking 2 года назад

Thank You, and Thanks for Watching!!!

@paulsimmons390 2 года назад

g r eat little project. Love it

@DeansWoodworking 2 года назад

Thank you Paul 😊and Thanks for Watching!!!

@garyjohnson9297 Год назад

I really like your little bowls , have to spin off some

@DeansWoodworking Год назад

Thanks Gary!!

@paulmelanson1527 Год назад

You make it look so easy

@DeansWoodworking Год назад

It is after you have done a few. Thanks for watching!!

@johnstpierre8909 Год назад

Nice

@DeansWoodworking Год назад

Thanks

@hardenwooddesign389 2 года назад

Very good video Dean. As a new turner. I'm always on the lookout for easy to accomplish projects! Thanks so much for the valuable teaching

@DeansWoodworking 2 года назад

Glad you enjoyed it

@Buttermilk3696 2 года назад

Real like this!! Looking for cedar fence posts now.

@DeansWoodworking 2 года назад

you can use any wood this was a limb off of a Pear tree. Thanks for Watching!!!

@bretteee 6 месяцев назад

I regularly make small bowels from branches and even from 4x4 timber especially if someone is replacing a fence nearby they make great little boxes has well . Really enjoyed watching you work and thanks for sharing your craft with us .

@DeansWoodworking 6 месяцев назад

Thank you!!

@terrysavage825 2 года назад

My wife uses the tiny bowls for salt and pepper near the stove. Beautiful work!

@DeansWoodworking 2 года назад

That's a great idea Terry, Thanks for Watching!!!

@davyaldy76 5 месяцев назад

I have one of those tiny gouges, nice to see another one.

@DeansWoodworking День назад

I love it!

@marknorman1491 2 года назад

Dean, I have decided to do a craft fair in December and was thinking of small bowls along with other bits and so will use this technique and see what happens, cheers old chap.

@DeansWoodworking 2 года назад

Good Luck, Thanks for Watching!!!

@WesleyJolly Год назад

@DeansWoodworking It's interesting watching how others do things. I make tons of little bowls from cutoffs, I've discovered that with a short piece that has a good tenon, it's easier to hollow the inside first, then shape the outside, then come back to the inside to turn to final thickness. It saves the rechucking step, I leave the bottoms smooth so I can burn in my logo with an iron so I don't put in the little grooves on the bottom.

@DeansWoodworking Год назад

Very cool! Thanks for Watching!!

@nitrousblast1 8 месяцев назад

Hi, great video and I’m going to try this soon. Just got my lathe and tools so I’m excited to get started. My question is, how did you attach the piece of wood to the faceplate to complete the outside turning. Thanks

@woodrat1952 2 года назад

Hi Dean, Great demo on world wide woodturning & this video on small bowl turning! I have a question about what appears to be a vacuum setup on your lathe? Would like to see you explain a little info about it!

@DeansWoodworking 2 года назад

Thank you I plan to do a video on the Vacuum setup in the near future its a little to much to cover here in comments. Thanks for Watching!!!

@charlesswift2497 2 года назад

Thank you for that demo, I'm new at woodturning and I've learned a lot from you. I think that little bowl is perfect for me at this point. You are doing a great job with your video demos. Thank you

@DeansWoodworking 2 года назад

Thanks Charles Glad it was helpful! Thanks for Watching!!!

@lolosworkshop7033 2 года назад

I recently got my wood lathe it’s not the biggest but I think I’ll be able to make some like these and one very interesting thing I have realized is the difference of age in between one artisan and the other, I’m 14 and I’ll very soon be able to say that I too am an artisan (and also an artist)

@DeansWoodworking 2 года назад

Welcome to the world of wood turning Have fun and be safe!!!

@lelandbird5446 2 года назад

i really like the smaller bowl idea Leland Bird Loveland co

@DeansWoodworking 2 года назад

Thanks

@shanemyers4142 4 месяца назад

Hey Dean 👋 love your content. can you tell me howmuch one of those might cost in your area??

@tommyschutz9008 2 года назад

Very good video. Once again you did an excellent job of explaining and showing your great technique. My dilemma is, I have a chuck, that only closes to 1 & 3/4", so how, once I get the bottom and outside of the bowl turned, and part it off, would I be able to turn it around and turn out the inside of the bowl? Also, recently, on the world wide web of woodturners, I saw you do a demo on making a platter. It was excellent, and I didn't take enough notes, in hopes that I could replay it and see the steps you took to complete it. However, I cannot locate where to go to see the past demos of the worldwide web of woodturners, when we meet on Wednesday nights. Thanks again Tommy Schutz

@DeansWoodworking 2 года назад

Tommy another way to do the tiny bowls that might work for you. Turn the outside and inside with the bowl still attached to the limb then part it off that way you don't have to rechuck it. the only downside is you don't get to finsih the bottom as nice but you can always sand it. Thanks for Watching

@davidcarson472 2 года назад

Can't wait to try!!!!

@DeansWoodworking 2 года назад

Thanks for the Comment and thanks for Watching!!

@nitrousblast1 8 месяцев назад

Hi, great video. I’m going to try these soon. How is the wood attached to the headstock?

@glencrandall7051 2 года назад

Entertaining and educational. A great way to spend 15 minutes or so. You mentioned using spindle gouges and bowl gouges on this project. And other turners have mentioned using both types almost interchangeably. I wonder if it would be a good idea to drop the designation of spindle and bowl and just refer to gouges as shallow flute and deep flute. Thank you for sharing. Have a great holiday and stay safe.

@DeansWoodworking 2 года назад

Good point Glen Thanks for Watching!!!

@DougMilleratWoodSpunRound 2 года назад

Super little bowl Dean. Nicely done. I’m thinking in the $15 range?

@DeansWoodworking 2 года назад

Thanks Doug I am still trying to figure this out but that is about what I was thinking. Thanks for Watching!!!

@PattersonPatch 2 года назад

I make little pill bowls, but I do not turn them end grain - I turn them same as larger bowls. I use a worm screw and my 1" Nova jaws to make a small mortise for. I batch them out buy taking a dry limb 4"ish in diameter, cut the top and bottom sides off on table saw, measure and mark my drill spots for the worm screw, drill, back to table saw and cut into individual pieces, round and make the mortises on the batch, use the 1" jaws in expansion and finish

@DeansWoodworking 2 года назад

Byron I make those as well this is something I am trying because I can produce them in just a couple minutes per bowl and sell them for less. Thanks for Watching!!

@peterfabricius662 2 года назад

I tried your process yesterday, ended up with five cute little bowls. Easy, fast and they look good. I used my Oneway Termite to hollow the end grain and it works just great, almost no sanding needed. Thanks, just wish I had a small set of dovetail jaws for my Stronghold Chucks. Using my Spigot Jaws leaves four small compression marks on the tenon…

@DeansWoodworking 2 года назад

Great job Peter Thanks for Watching!!!

@tobykathan8277 Год назад

Did you say to make the diameter of the bowl the same as the height? I love the proportions on that bowl and I’ve been struggling to find a shape I like on my little bowls.

@DeansWoodworking Год назад

no it is wider than tall.

@simonbarnard1861 2 года назад

Nice project. As you’re end grain hollowing on the inside, would you not cut from centre to outside else you’re cutting directly into the end grain most of the cut?

@DeansWoodworking 2 года назад

you are Correct however with a sharp tool you can make it work. Thanks for Watching!!!

@scotthampton9229 2 года назад

Great little project. What size blank are you using? Thanks 😊.

@DeansWoodworking 2 года назад

Scott the blank needs to be jus a little longer than the diameter. Thanks for Watching!!!

@troumesolange4042 7 месяцев назад

I love your method

@DeansWoodworking 6 месяцев назад

Thank you

@snobear41 Год назад

hey Dean, great video as always! Question, would it not be possible and faster to start with a long blank chucked up as you have, make the end the top of the bowl, part down and make your foot then curve down to it. parting off square to start next bowl (after sanding & fish of course) ? I am not a super experienced turner but in my mind that is what I expected you to do before watching video.

@DeansWoodworking Год назад

yes you can absolutly do it that way what you miss out on is being able to completely finish the bottom on the lathe. Thanks for Watching!!!

@paulmelanson1527 Год назад

Love your videos...did anybody ever tell you you sound like Dr Phil..

@DeansWoodworking Год назад

Thank you, I have not heard that before. Thanks for watching!!!

@shanemyers4142 6 месяцев назад

I've been turning for a shirt while, I just love your content and you're very educational. I was just curious what a bowl like that goes for price wise?

@DeansWoodworking 6 месяцев назад

It just depends on the size.

@hardyhobbs 2 года назад

I'm having the same problem. I think I have found a Bulldog chuck spigot jaw with a dovetail. Got it ordered!

@DeansWoodworking 2 года назад

let me know how it works, Thanks for Watching!!!

@hardyhobbs 2 года назад

@@DeansWoodworking I also contacted Nova and they stated the 6091 35 mm jaws will fit my G3 chucks. Thanks for your very easy to follow videos.

@hardyhobbs 2 года назад

@@DeansWoodworking Dean- I got the 6091 jaws and they leave too large an opening and are not a good fit. The bulldog spigot jaws fit perfectly . after making the first bowl with marks on the tenon, I made 20 bowls using the bulldog jaws and am very pleased with the results. Thanks again for the excellent video.

@blumax413 2 года назад

Great video. I was wondering if you ever did this bowl the other way and cut out the centerpiece first and then shaped down the side to the foot

@DeansWoodworking 2 года назад

I have, however I like being able to add that little bit to the foot and not having tear out on the foot from the parting tool. You can do it both ways and if you do not have the small jaws you can still do them. I may do another video showing the other way. Thanks for Watching.

@Just_me1776 2 года назад

I was thinking about that too, since I only have a faceplate for now.

@my_name_is_betty283 6 месяцев назад

I think I can do a big slappy happy bowl if you give me a chance

@DeansWoodworking 6 месяцев назад

Go for it you can do it. Thanks for Watching!!

@scottfaulk9081 2 года назад

Just discovered your channel - you do a really nice job of explaining step by step. Thanks for the instruction

@DeansWoodworking 2 года назад

Thanks Scott, and Thanks for Watching!!!

@keithreutter4253 2 года назад

Dean whats the best way to keep them from cracking after turning them. I did some end grain tea lamp holders and the pithe was about a 1/4" everyone of them cracked big time.?

@DeansWoodworking 2 года назад

Turn them thin and coat them with danish oil or antique oil finish as soon as possible. I have links in the descreption for the antique oil finish. Thanks for Watching!!!

@dianadougherty7187 2 года назад

Hi Dean, I just discovered your channel and I'm really enjoying it. Can you tell me if you use a new brush each day for your oil or do you have a magic way of keeping your brush "ungummed" or fresh. Thanks diana

@DeansWoodworking 2 года назад

Diana for the walnut oil I can use a brush for a week or so but it dries very slowly, everything else I use it and toss it. Thanks for Watching!!!

@boooshes 2 года назад

Another option I use regularly is simply to put a little on your fingers (or in your palm for larger bowls) and apply with your hands (machine off). With a little practice you won't waste any, won't need a brush, and the residue just gets rubbed into your hands to keep them smooth.

@DeansWoodworking 2 года назад

Thanks for the Tip

@francisschmitz84 2 года назад

Are you using fairly dry wood to make sure you do not get cracks? Or as I think I heard, fruit woods do not tend to crack.

@DeansWoodworking 2 года назад

This was fairly dry the secret to these is thin consistant wall thickness.

@RLittlefeather 2 года назад

Thanks for the vid!! Am new to this and wanted to ask - It seems that most of your tools are sharpened with a "fingernail" tip. Is this the case with most of the gouges you use?

@DeansWoodworking 2 года назад

I use several different grinds, It really depends on what you are doing and what you prefer. Thanks for watching!!!

@darylreinke2619 2 года назад

Thanks! I’m recently retired and getting some stock built up for my first craft sale. Trouble is, I have zero experience in pricing. What would you price this little bowl at?

@DeansWoodworking 2 года назад

Daryl It really depends on your area many people get a lot more than I do however we have decided to go with $15. Thanks for Watching!!!

@Just_me1776 2 года назад

I like those calipers, if that’s what they’re called. I need some

@DeansWoodworking 2 года назад

Thanks Jeff and Thanks for Watching!!!

@lenshandcraftedwoodsigns6033 Год назад

HI Dean, what do you mean by "shaped more like a bowl gouge" but it is a spindle gouge?

@DeansWoodworking Год назад

The flute is deep for a spindle gouge. Thanks for Watching!

@mikepetitt9624 2 года назад

Hi great idea they look great! I just did my first craft fair and would like to make something like these. Question if I may ask what price do you sell these for?? Thanks in advance...

@DeansWoodworking 2 года назад

I do 12 each or 2 for 20. Thanks for Watching!!!

@mikepetitt9624 2 года назад

Thank you very much!

@DeansWoodworking 2 года назад

your very welcome.

@jimjohnson1901 Год назад

What gouge did you use on the outside of the bowls? mAnd what angle do you grind? Jim Johnson Kansas City.

@DeansWoodworking Год назад

jim I am not sure but I think that was a 3/8" bowl gouge with a 55 degree grind. Thanks for watching!!

@richardschaffling9882 2 года назад

Look nice and they are fast

@DeansWoodworking 2 года назад

Thanks Richard, and Thanks for Watching!!!

@glencrandall7051 Год назад

I have been without a shop for nearly a year. Now my move is complete and the shop is ready for work. So a couple of questions come to mind. What do you charge for bowls like you demonstrated? What class of people are you selling to? I know, for instance, that a bowl which would go for $50 in an upper class gallery won't sell at a country craft show. I also know that a rough pricing method would be cost of material and cost of time to make the piece. But the cost of wood and the value of my time can very a lot.

@DeansWoodworking Год назад

Glenn the show that I do covers a huge mix of demographics so its hard to say. I sell these from 10 - 20 depending on size.

@glencrandall7051 Год назад

@@DeansWoodworking Thanks Dean. That helps.🙂🙂

@DeansWoodworking Год назад

your very welcome!

@conradnudd7398 2 года назад

So how much would you get for that bowel? Thanks for the video.

@DeansWoodworking 2 года назад

It really depends on your area but I sold the last ones for $12 each.

@johnpargeon5690 2 года назад

What are the dimensions of the starting stock and the finished bowl?

@DeansWoodworking 2 года назад

John I make these from limbs off of the Tree so its just what ever you have. I have made them as small as 1.5" and as big as 4" I hope this helps, Thanks for Watching!!!

@trumpetme8756 2 года назад

What kind of partying tool do you use?

@DeansWoodworking 2 года назад

That is a 1/8 inch parting tool this particular one was made by Stuart Batty Tools but everyone makes them. Thanks for Watching!!!

@TheFortycaliber 2 года назад

Great to see another turner from the Lone Star State! Howdy from the Birthplace of Texas!

@DeansWoodworking 2 года назад

Thanks Monty, and Thanks for Watching!!!

@frankrossi5019 2 года назад

I moved from League City to north of Austin a few years ago. Got into turning last year. What part of League City?

@DeansWoodworking 2 года назад

South Shore Thanks for Watching!!!

@frankrossi5019 2 года назад

@@DeansWoodworking I moved from the subdivision off 518 and Laguna Point. So very close to you. The street was Misty Morning. I don't know if you ever went there to see my Christmas lights to music.

@TheSafecrkr1 Год назад

If they sell out how much do you sell them for? That's not a criticism it is just information for me at my craft shows. Please respond because my next show is coming up.

@DeansWoodworking Год назад

Depends on the size normally anywhere from 7 -15 $

@comfortolunubi3123 9 месяцев назад

Nice small bowl, how can I make an order online, and what is the unit price?

@DeansWoodworking 9 месяцев назад

I have been out of the shop Since September 25th last year I do not have any at this time.

@jeffwalters3735 2 года назад

What kind of price would you ask for that at a Craft Show?

@DeansWoodworking 2 года назад

I have not decided yet, however my thoughts are somewhere around 8-10 I always like to have a few things below 15 because I always sell out of the lower priced items. Thanks for Watching!!!

@harryhagelund7674 6 месяцев назад

That dangling sleeve SO CLOSE TO THE CHUCK while using the parting tool! A little scary!

@rickswengel2341 2 года назад

How much would you charge for a bowl like that at a craft show?

@DeansWoodworking 2 года назад

I sold those for $12 ea and sold out early in the show. Thanks for Watching!

@DanielWilliams-vo7ni Год назад

Your bowl turned out way different from mine, mine looks like a normal bowl,

@DeansWoodworking Год назад

Thanks they will all be different.

@geofftidy8745 2 года назад

Do the chuck jaws mark the outside of the tenon?

@DeansWoodworking 2 года назад

If you set your jaws to the optimum size usualy close them down until you only have a bout 3/16" gap between the jaws. then make your tenon to that size you will have little or no marking on the tenon. Thanks for Watching!!!

@reltcl1995 Год назад

Green or dry wood

@DeansWoodworking Год назад

This one was dry but normally they are green. Thanks for Watching!!!

@larryhill6187 2 года назад

What do these sell for

@DeansWoodworking 2 года назад

I sold them for $12 ea this last weekend. Thanks for Watching!!!

@joerangel9871 2 года назад

It doesn't seem like you have enough of a tendon on the bottom of the bowl for the chuck to grab onto, yet it looks like the chuck grabs it firmly. Optical illusion I guess.

@DeansWoodworking 2 года назад

It really does not take a big tennon to hold a small bowl. Thanks for Watching!!!

@Fluffypotatoes4 19 дней назад

Why did i make one and then watchb the video?

@darylreinke2619 2 года назад

Whoops you already answered that

@DeansWoodworking 2 года назад

ok Thanks for Watching!!!

@Cancun771 Год назад

Soooo the chuck marks on the foot?

@DeansWoodworking Год назад

no chuck marks when you size the tennon correctly. Thanks for Watching!!!

@Cancun771 Год назад

@@DeansWoodworking Thanks, I have to try that.

@DeansWoodworking Год назад

Give it a try I think you will like the results.

@darylreinke2619 2 года назад

What do these little bowls sell for?

@dennisnebgen9049 Год назад

What would you charge for that bowl?

@DeansWoodworking Год назад

Do you see something that I should change if so please share

@dennisnebgen9049 Год назад

@@DeansWoodworking Just askedabout what you charge for that bowl? Was it in the video? If so, I missed it.

@DeansWoodworking Год назад

Sorry I have not been feeling well and I completely misread your question. I normally sell them for about $10 ea. They are quick and easy to turn and after making so many I can turn out about a dozen an hour so it makes it profitable. Thanks for Watching!!