How to Two Tone Powder Coat Wheels

Подписаться 11 тыс.

Просмотров 19 тыс.

50% 1

Today we're going show you how to two tone powder coat custom wheels.
Get a FREE quote for NEXT Insurance and get insurance for your business
nextinsurance.sjv.io/x9aXq3
Powder Coat Detail Vacuum Kit for two and multi color coating 710performance.com/shop
MUSIC PROVIDED BY;
Song: Luke Bergs & MBB - Got The Feeling
Music provided by Vlog No Copyright Music.
Video Link: • Luke Bergs & MBB - Got...
Song: Popsicles & Pierse - Falling
Music provided by Vlog No Copyright Music.
Video Link: • Popsicles & Pierse - F...
Song: Balynt - Harmony
Music provided by Vlog No Copyright Music.
Video Link: • Balynt - Harmony (Vlog...
Song: Justhea - Summer Nights
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • Justhea - Summer Night...
Are you looking to start a powder coating business, or just looking to grow your current powder coating business? Consider joining our Facebook Group "This Business of Powder Coating" to learn from other powder coaters, and help to grow your business / 276929966748631
Products we use daily;
We use Bare Metal Stripper to strip our parts. You can check them out at BareMetalStripper.com
Inkbird PID Controller - amzn.to/34hY92s
3/8" Electric Solenoid Valve 12-VDC - amzn.to/3w9BeBH
9Pcs/Set Universal Vacuum Cleaner Attachments - amzn.to/34nKZRD
502 Piece Professional Plug Kit - amzn.to/3ghd7YN
40 Pc 1/16" to 3/4" High Temp Silicone Plug Kit - amzn.to/34kPTi2
5 Roll High Temp Masking Tape Kit - amzn.to/2CKAiNn
160pc High Temp Assortment Kit - amzn.to/3iTch64
20pc Extra Large High Temp Silicone Rubber Plug Kit - amzn.to/2FI4eeg
3/4" Wide High Temp Masking Tape - amzn.to/3gfFhn0
50 Piece 1/16" X 3/16" High Temp Silicone Plug Kit - amzn.to/2EfDdOx
124 Piece High Temp Silicone Plug, Cap, Masking Tape and Hook Assortment - amzn.to/2YiwdaO
Sony Alpha a7iii - amzn.to/3g1eZFO
Rode VideoMic Pro+ - amzn.to/2Bz9wHk
UGREEN Micro HDMI to HDMI Cable Adapter - amzn.to/34hFns0
Video Capture Cards, HDMI to USB 2.0 - amzn.to/3ha1RPb
Make sure and follow us on social media for more great and different content! If you would like custom powder coating, you can check prices on our website below!
710 Performance Instagram - / 710performance
The Powder Junkies Instagram - / thepowderjunkies
TL’s Instagram - / its_tl_
Jeremy’s Instagram - / jermjerm42o
710 Performance Twitter - / 710performance
TL’s Twitter - / its_tl_
Email 710 Performance at Info@710Performance.com

Авто/Мото

Опубликовано:

23 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@Dezert_Syndicate 5 месяцев назад

Wow lots of work but that chartreuse and black is freaking killer

@710performance 5 месяцев назад

Thank you 🙏 💪

@rafiekahmed8568 6 месяцев назад

Hi it’s Rafiek from sunny South Africa thanks for sharing the look awesome

@710performance 6 месяцев назад

🤙🤙

@jojoaka420b 2 месяца назад

Best job ive see 👍🏾 these look great

@710performance 2 месяца назад

Thank you 🙏 greatly appreciated!

@mlc_fab 8 месяцев назад

That turned out great! Awesome job!

@710performance 8 месяцев назад

Thank you! 💪

@richardpogue4959 Год назад

That turned out awesome well done

@710performance Год назад

Thank you 🙏

@jasonstatement3553 Год назад

Great job, thank you for the detailed explanation!

@710performance Год назад

You’re welcome! Glad it helped!

@williamchow1624 4 месяца назад

Yes a lot of work, but great job and looks fantastic. I think will give it a try but on a less detailed wheel.

@710performance 4 месяца назад

Thank you. You should try it, you’ll do fine

@MrCeez1 Год назад

Great work Sir. I appreciate you sharing your knowledge

@710performance Год назад

Thank you 🙏

@papawheelie9144 Год назад

Awesome wheels, awesome job.

@710performance Год назад

Thank you 🙏 most appreciated!

@MyOyvind Год назад

lovely color combination

@710performance Год назад

Thank you 🙏 it’s one we’ve wanted to do for awhile, we had the opportunity to choose the color of these wheels so we decided to finally do it!

@brianbak6405 Год назад

Wow great work 👍

@710performance Год назад

Thank you 🙏

@NewsThatMatterUsa Год назад

Well done 👍🏻

@710performance Год назад

Thank you 🙏

@DanielBaumi Год назад

Awesome Man....😮

@710performance Год назад

Thanks! Most appreciated 🙏

@robertbragg9364 Год назад

Looks amazing. I think I'm gonna leave the two tone to you for a long while. Maybe someday though.

@710performance Год назад

Thank you lol, you can do it!

@theartman410 Год назад

The part you call a bolt is really a nut. Great video, glad you started doing You Tube video again

@710performance Год назад

Thanks!

@theartman410 Год назад

@@710performance What the name of the video that you made of list everything to build a oven

@710performance Год назад

@@theartman410 I don’t know we have a few. You can checkout out oven build playlist

@brownbutterfly9753 Год назад

SWEET!!!!…😍🌸

@710performance Год назад

Thank you!

@brownbutterfly9753 Год назад

@@710performance 🌸

@jhammer929 Год назад

Hey man! Great job!! What vacuum setup are you using? I still haven't found a decent setup yet.

@710performance Год назад

We're using the Powder Coat Detail Vacuum kit that we make and sell 710performance.com/shop

@88nicholas19 6 месяцев назад

that looks awesome. i cant imagine what the cost of something like that would be.

@710performance 6 месяцев назад

Thank you! In this 20” wheel it about $300 per wheel

@Andy-dl2zy Год назад

Awesome job..!! Just wondering if you could show how and what you do to the center caps… no one i can find shows how they do them.. thanks for the hard work and great videos

@710performance Год назад

These center caps came this color

@710performance Год назад

But we do have some videos coming up showing some different options to do caps, but not powder coat. Paint or vinyl is the best if they are plastic caps

@Andy-dl2zy Год назад

Ok thanks

@robertbragg9364 Год назад

@@710performance thanks I appreciate it. I actually have a little trick for doing the center caps that works surprisingly well and it matches because you use the powder coating. Before you do the wheel you clean it up with the blaster or rim strip in your case. Lay the cap in the wheel and charge the wheel. Heat the cap with a heat gun but not too much. There's a sweet spot, and then you just coat the center slow. Then continue to heat it for 10 to 20 minutes. Some center caps are super cheap and some aren't you may need longer or less time depending on the caps. If you haven't tried it, try it out sometime. You have a far better setup than I do, and I'd like to see you figure that out. I know a few people do it like this already but you could be the one to "perfect" it. You're a damn genius with that 2 stage video I just saw today. That sharp neon green and satin black. 👌 have a good one and thanks for taking the time to read and reply.

@srthenapster Год назад

excellent video brother, I have a problem the second color does not adhere, can you advise me?

@710performance Год назад

I need more information to help you. How long are you curing the first color?

@CraigHollabaugh Год назад

Beautiful work! When you say 60% cure, you're talking about 60% of the total cure time at the cure temperature? Thanks for the video, its given me some ideas for non-car projects.

@710performance Год назад

Thank you, Yes that is what I’m talking about with a 60% cure. Some times we also run it at a lower temp. Say 350° until it gets to temp, then 5 minutes

@CraigHollabaugh Год назад

@@710performance thanks, I'll try it on some scrap metal.

@iPrint3D Год назад

Notification squad

@710performance Год назад

YEAH BUDDY! Thank you for your support! 💪💪

@theroughblueram114thgen5 Год назад

Where can one find the materials to create the vacuum pen that you use ? Love your channel

@710performance Год назад

Thank you 🙏 We sell the vacuum kit in our website 710performance.com/shop

@thinkconcreteatlantallc8847 Год назад

I hook it up to the compressor?

@raymondsmalls4602 4 месяца назад

What wheel stripper do you use, and do you use it on all wheels or just those?

@710performance 4 месяца назад

we use Bare Metal Stripper and we use it on pretty much all wheels

@OPAATGARAGE 4 месяца назад

Do you have a video on your vacuum or how to vacuum.

@710performance 4 месяца назад

Yes we do have a few on the channel.

@OPAATGARAGE 4 месяца назад

@710performance thanks, I'll be looking for them.

@tevameyer9471 11 месяцев назад

Hi, what is the precision pen or spary gunnyou used for the yello part ? Precision powder coating gun ? Ref or link ?

@710performance 11 месяцев назад

It’s the Powder Coat Detail Vacuum Kit, we sell it on our website 710performance.com/shop

@tevameyer9471 11 месяцев назад

@@710performancemy english is not so good to understand every details of the video. So (q1) is that correct, you coat and cure fiirst layer at 60% cure time, yhen coat a second tone layer and vaccum it whith precision and then full cure the two layers. I heard not to vacuum powder coat cause it is explosive. (2) what vacuum to buy, non explosive, lower cost for athome DIY, (3) which one do you use ? (4) How to vacuum strait lines ? Br Tahiti

@ippielb Год назад

I am having problems when laying powder down, and it starts to make little craters where the powder refuses to stick to. Almost like it has a static charge that repels it in little spots. Any idea why? I have chartreuse to do some snowmobile parts but don't want to mess it up.

@710performance Год назад

What system are you using? It's most likely your system, you're getting fairade areas

@ippielb Год назад

@@710performance harbour freight equivalent. I’m from Canada so we have a Princess auto “power fist” brand. It doesn’t do it all the time. Just randomly when the powder starts building up.

@Lupinsx 3 месяца назад

How do you get the second color to stick to the first color during the powder application? Are you still electrically charging for the second coat? Thanks

@710performance 3 месяца назад

Yes, we are. any good powder coating system will do multiple coats with ease

@WestCoastYardandGarden 3 месяца назад

I have the Eastwood duel voltage gun. Obviously an entry level gun. I wonder if this would be able to do two coats?

@mikejohnson1343 8 месяцев назад

how much does something like this cost. i have 3 harley davidson wheels i would like done 2 tone. front wheel double sided and 2 back wheels. its a trike

@710performance 8 месяцев назад

It really depends on the color and the size of the wheels. Send us an email at info@710performance.com and we can get you a quote.

@barronrubiodaniel6377 10 месяцев назад

What are you using to remove the 2 tone?

@710performance 10 месяцев назад

The Powder Coat Detail Vacuum Kit, you can purchase it on our website 710performance.com/shop

@re9473 Год назад

Is it possible to do two tone, color wheels, and make them real glossy? If so, what is the process to accomplish that?

@710performance Год назад

you can choose to coat them with a high gloss clear after the two-tone process.

@re9473 Год назад

@@710performance OK and what is the process of baking between each coat? How would you do it?

@tigwelding123 Год назад

💪👍💯

@710performance Год назад

💪💪💪

@taylorlove303 8 месяцев назад

Could you do a set of TE37x that I need redone in black? They have the volk logo milled out and I need that to be the two tone part. None of my local shops can do it.

@710performance 8 месяцев назад

Yes we can. If you would like a quote, please feel free to email us at info@710performance.com

@KhameleonKoatings 6 месяцев назад

why not just use closed eye bolts, and why the 2nd nut...doesnt gravity keep the wheel the resting onto the end nut that is at the end of the threads >> i dont see a need for the 2nd nut, that tightens onto the rim. gravity keeps the wheel in place...right? just trying to help out

@710performance 6 месяцев назад

It was just something we were testing.